Re: [PATCH 3/4] UML - Properly invoke x86_64 system calls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 17 Nov 2005, Jeff Dike wrote:

> This patch makes stub_segv use the stub_syscall macros.  This was
> needed anyway, but the bug that prompted this was the discovery that
> gcc was storing stuff in RCX, which is trashed across a system
> call.

But the C-calling convention used by gcc for 32-bit systems
is supposed to allow the called-function to destroy general-
purpose registers but not index registers. In other words,
ECX, EDX are supposed to be available and EAX is used for
return-values. The register size isn't supposed to have
anything to do with it (longword/quadword)!

In 64-bit world, the same is supposed to apply as well.
If RCX is now precious, it's a GCC bug that should be fixed.

Yes?

   This is exactly the sort of problem that the new macros fix.
> There is a stub_syscall0 for getpid.
> stub_segv was changed to be a libc file, and that caused some
> include changes.
>
> Signed-off-by: Jeff Dike <[email protected]>
>
> Index: linux-2.6.15/arch/um/include/sysdep-i386/stub.h
> ===================================================================
> --- linux-2.6.15.orig/arch/um/include/sysdep-i386/stub.h	2005-11-17 14:59:30.000000000 -0500
> +++ linux-2.6.15/arch/um/include/sysdep-i386/stub.h	2005-11-17 14:59:55.000000000 -0500
> @@ -16,6 +16,15 @@
> #define STUB_MMAP_NR __NR_mmap2
> #define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT)
>
> +static inline long stub_syscall0(long syscall)
> +{
> +	long ret;
> +
> +	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
> +
> +	return ret;
> +}
> +
> static inline long stub_syscall1(long syscall, long arg1)
> {
> 	long ret;
> Index: linux-2.6.15/arch/um/include/sysdep-x86_64/stub.h
> ===================================================================
> --- linux-2.6.15.orig/arch/um/include/sysdep-x86_64/stub.h	2005-11-17 14:59:30.000000000 -0500
> +++ linux-2.6.15/arch/um/include/sysdep-x86_64/stub.h	2005-11-17 14:59:55.000000000 -0500
> @@ -6,7 +6,6 @@
> #ifndef __SYSDEP_STUB_H
> #define __SYSDEP_STUB_H
>
> -#include <asm/ptrace.h>
> #include <asm/unistd.h>
> #include <sysdep/ptrace_user.h>
>
> @@ -20,6 +19,17 @@
> #define __syscall_clobber "r11","rcx","memory"
> #define __syscall "syscall"
>
> +static inline long stub_syscall0(long syscall)
> +{
> +	long ret;
> +
> +	__asm__ volatile (__syscall
> +		: "=a" (ret)
> +		: "0" (syscall) : __syscall_clobber );
> +
> +	return ret;
> +}
> +
> static inline long stub_syscall2(long syscall, long arg1, long arg2)
> {
> 	long ret;
> Index: linux-2.6.15/arch/um/sys-i386/Makefile
> ===================================================================
> --- linux-2.6.15.orig/arch/um/sys-i386/Makefile	2005-11-17 14:59:30.000000000 -0500
> +++ linux-2.6.15/arch/um/sys-i386/Makefile	2005-11-17 14:59:55.000000000 -0500
> @@ -5,7 +5,7 @@
> obj-$(CONFIG_HIGHMEM) += highmem.o
> obj-$(CONFIG_MODULES) += module.o
>
> -USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
> +USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o stub_segv.o
>
> SYMLINKS = bitops.c semaphore.c highmem.c module.c
>
> Index: linux-2.6.15/arch/um/sys-i386/stub_segv.c
> ===================================================================
> --- linux-2.6.15.orig/arch/um/sys-i386/stub_segv.c	2005-11-17 14:59:30.000000000 -0500
> +++ linux-2.6.15/arch/um/sys-i386/stub_segv.c	2005-11-17 14:59:55.000000000 -0500
> @@ -3,9 +3,11 @@
>  * Licensed under the GPL
>  */
>
> -#include <asm/signal.h>
> +#include <signal.h>
> +#include <sys/select.h> /* The only way I can see to get sigset_t */
> #include <asm/unistd.h>
> #include "uml-config.h"
> +#include "sysdep/stub.h"
> #include "sysdep/sigcontext.h"
> #include "sysdep/faultinfo.h"
>
> @@ -13,13 +15,14 @@
> stub_segv_handler(int sig)
> {
> 	struct sigcontext *sc = (struct sigcontext *) (&sig + 1);
> +	int pid;
>
> 	GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
> 			      sc);
>
> -	__asm__("movl %0, %%eax ; int $0x80": : "g" (__NR_getpid));
> -	__asm__("movl %%eax, %%ebx ; movl %0, %%eax ; movl %1, %%ecx ;"
> -		"int $0x80": : "g" (__NR_kill), "g" (SIGUSR1));
> +	pid = stub_syscall0(__NR_getpid);
> +	stub_syscall2(__NR_kill, pid, SIGUSR1);
> +
> 	/* Load pointer to sigcontext into esp, since we need to leave
> 	 * the stack in its original form when we do the sigreturn here, by
> 	 * hand.
> Index: linux-2.6.15/arch/um/sys-x86_64/Makefile
> ===================================================================
> --- linux-2.6.15.orig/arch/um/sys-x86_64/Makefile	2005-11-17 14:59:30.000000000 -0500
> +++ linux-2.6.15/arch/um/sys-x86_64/Makefile	2005-11-17 14:59:55.000000000 -0500
> @@ -12,7 +12,7 @@
> obj-y := ksyms.o
> obj-$(CONFIG_MODULES) += module.o um_module.o
>
> -USER_OBJS := ptrace_user.o sigcontext.o
> +USER_OBJS := ptrace_user.o sigcontext.o stub_segv.o
>
> SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \
> 	thunk.S module.c
> Index: linux-2.6.15/arch/um/sys-x86_64/stub_segv.c
> ===================================================================
> --- linux-2.6.15.orig/arch/um/sys-x86_64/stub_segv.c	2005-11-17 14:59:30.000000000 -0500
> +++ linux-2.6.15/arch/um/sys-x86_64/stub_segv.c	2005-11-17 15:12:23.000000000 -0500
> @@ -3,14 +3,14 @@
>  * Licensed under the GPL
>  */
>
> -#include <asm/signal.h>
> +#include <stddef.h>
> +#include <signal.h>
> #include <linux/compiler.h>
> #include <asm/unistd.h>
> -#include <asm/ucontext.h>
> #include "uml-config.h"
> #include "sysdep/sigcontext.h"
> #include "sysdep/faultinfo.h"
> -#include <stddef.h>
> +#include "sysdep/stub.h"
>
> /* Copied from sys-x86_64/signal.c - Can't find an equivalent definition
>  * in the libc headers anywhere.
> @@ -31,21 +31,21 @@
> stub_segv_handler(int sig)
> {
> 	struct ucontext *uc;
> +        int pid;
>
> 	__asm__("movq %%rdx, %0" : "=g" (uc) :);
> 	GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
> 			      &uc->uc_mcontext);
>
> -	__asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid));
> -	__asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;"
> -		"syscall": : "g" (__NR_kill), "g" (SIGUSR1) :
> -		"%rdi", "%rax", "%rsi");
> +	pid = stub_syscall0(__NR_getpid);
> +	stub_syscall2(__NR_kill, pid, SIGUSR1);
> +
> 	/* sys_sigreturn expects that the stack pointer will be 8 bytes into
> 	 * the signal frame.  So, we use the ucontext pointer, which we know
> 	 * already, to get the signal frame pointer, and add 8 to that.
> 	 */
> -	__asm__("movq %0, %%rsp": :
> +	__asm__("movq %0, %%rsp; movq %1, %%rax ; syscall": :
> 		"g" ((unsigned long) container_of(uc, struct rt_sigframe,
> -						  uc) + 8));
> -	__asm__("movq %0, %%rax ; syscall" : : "g" (__NR_rt_sigreturn));
> +						  uc) + 8),
> +                "g" (__NR_rt_sigreturn));
> }
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

Cheers,
Dick Johnson
Penguin : Linux version 2.6.13.4 on an i686 machine (5589.44 BogoMips).
Warning : 98.36% of all statistics are fiction.
.

****************************************************************
The information transmitted in this message is confidential and may be privileged.  Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited.  If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.

Thank you.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux