Re: [PATCH] backup timer for UARTs that lose interrupts (take 2)

[George Anzinger <george@mvista.com>]

Could you _please_ not put inline patches after the signature mark ("-- ").  In my mailer (mozilla) 
this causes the patch to be greyed out and, more importantly, NOT included in a reply.  This, in 
turn, makes it hard to comment on details in the patch.

Thanks
George
--


Alex Williamson wrote:
> Hi Russell,
>
>    I've revised the patch for this backup timer idea based on your
> comments.  Hopefully the restoring of the timer function to the default
> serial8250_timeout is more obvious now.  I also re-ordered some of the
> conditions around the bug test to add further clarity.  Please let me
> know if you see any further issues with this patch.  Patch below is
> against 2.6.14-mm2.  Here's the original patch description message:
>
>    The patch below works around a minor bug found in the UART of the
> remote management card used in many HP ia64 and parisc servers (aka the
> Diva UARTs).  The problem is that the UART does not reassert the THRE
> interrupt if it has been previously cleared and the IIR THRI bit is
> re-enabled.  This can produce a very annoying failure mode when used as
> a serial console, allowing a boot/reboot to hang indefinitely until an
> RX interrupt kicks it into working again (ie. an unattended reboot could
> stall).  Paul Bame submitted a complete workaround for 2.4 kernels a few
> years ago - http://lkml.org/lkml/2003/5/6/203.  The problem has not been
> as prevalent on the 2.6 serial driver, thus the solution below is
> simplified to only insert a backup timeout to kick the UART when it gets
> into trouble.  This runs alongside the normal interrupt driven UART code
> and has a longer period that the standard polling driver to reduce CPU
> overhead.  The detection test should be safe for all UARTs and the
> backup timer can easily be extended to include other UARTs with similar
> disorders.
>
>    Please apply.  Thanks,
>
> 	Alex

--
George Anzinger   george@mvista.com
HRT (High-res-timers):  http://sourceforge.net/projects/high-res-timers/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/