On Thu, 2005-11-10 at 11:59 +0100, Pavel Machek wrote:
> Well, how do I found out? I tried switching to CFI, and it will not
> boot (unable to mount root...). No mtd-related messages as far as I
> can see. There's quite a lot of mtd-related config options, I set them
> like this:
If the old sharp driver had even a _chance_ of working, then you
presumably have four 8-bit flash chips laid out on a 32-bit bus, and
those chips are compatible with the Intel command set.
You can CONFIG_MTD_JEDECPROBE, and you want CONFIG_MTD_MAP_BANK_WIDTH=4,
CONFIG_MTD_CFI_I4, CONFIG_MTD_CFI_INTELEXT.
Check that your chips are listed in the table in jedec_probe.c and turn
on all the debugging in jedec_probe.c
--
dwmw2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
