Re: [Fastboot] [PATCH] i386: move apic init in init_IRQs

[Vivek Goyal <vgoyal@in.ibm.com>]

Hi Eric,

I had a couple of observations.

[..]
>  #ifdef CONFIG_X86_IO_APIC
>  	{
> @@ -1046,9 +1050,11 @@ static unsigned int calibration_result;
>  
>  void __init setup_boot_APIC_clock(void)
>  {
> +	unsigned long flags;
>  	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
>  	using_apic_timer = 1;
>  
> +	local_irq_save(flags);
>  	local_irq_disable();
>  

Should the local_irq_disable() call go away onece local_irq_save() got
introduced.


>  	calibration_result = calibrate_APIC_clock();
> @@ -1057,7 +1063,7 @@ void __init setup_boot_APIC_clock(void)
>  	 */
>  	setup_APIC_timer(calibration_result);
>  
> -	local_irq_enable();
> +	local_irq_restore(flags);
>  }
>  

[..]
>  
>  	verify_local_APIC();
>  
> +	/*
> +	 * Should not be necessary because the MP table should list the boot
> +	 * CPU too, but we do it for the sake of robustness anyway.
> +	 * Makes no sense to do this check in clustered apic mode, so skip it
> +	 */
> +	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
> +		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
> +				boot_cpu_physical_apicid);


I am testing kdump on i386 and I am hitting this message while second kernel
is booting. I am doing testing with 2.6.14-rc4-mm1. Logs are pasted below.

Also kdump testing fails almost 50% of the time on my machine with
2.6.14-rc4-mm1.  It works fine with 2.6.14-rc4 though.

Second kernel is unable to come up. earlyprintk on serial console showed
a kernel BUG in setup_local_APIC(). Details are included in the logs below.

Second kernel boot log.

# SysRq : Trigger a crashdump
I'm in purgatory
Linux version 2.6.14-rc4-mm1-16M (root@llm01.in.ibm.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 PREEMPT Wed Oct 19 13:55:24 IST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000100 - 000000000009d000 (usable)
 BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002fffa480 (usable)
 BIOS-e820: 000000002fffa480 - 0000000030000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
user-defined physical RAM map:
 user: 0000000000000000 - 00000000000a0000 (usable)
 user: 0000000001000000 - 000000000142d000 (usable)
 user: 00000000014cd400 - 0000000004000000 (usable)
0MB HIGHMEM available.
64MB LOWMEM available.
found SMP MP-table at 0009e140
early console enabled
DMI 2.1 present.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
Processor #3 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 17
WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:10 APIC version 17
WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 6:10 APIC version 17
WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Enabling APIC mode:  Flat.  Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10000000 (gap: 04000000:fc000000)
Built 1 zonelists
Initializing CPU#0
Kernel command line: ro root=/dev/sda7 rhgb console=ttyS0,38400 irqpoll init 3 earlyprintk=ttyS0,38400 memmap=exactmap memmap=640K@0K memmap=4276K@16384K memmap=44235K@21301K elfcorehdr=21300K
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
weird, boot CPU (#1) not listed by the BIOS.
------------[ cut here ]------------
kernel BUG at ÿÿÿÿ:1479!
invalid operand: 0000 [#1]
PREEMPT
last sysfs file:
Modules linked in:
CPU:    0
EIP:    0060:[<c1012b17>]    Not tainted VLI
EFLAGS: 00010046   (2.6.14-rc4-mm1-16M)
EIP is at setup_local_APIC+0x26/0x18c
eax: 00000000   ebx: 00040011   ecx: 00000c06   edx: 00000000
esi: 00000011   edi: c13a9800   ebp: 01445007   esp: c13b5fbc
ds: 007b   es: 007b   ss: 0068
Process swapper (pid: 0, threadinfo=c13b4000 task=c133faa0)
Stack: c13a9800 01445007 c101ac30 00000000 01429900 c13c1c49 c12e8a4c 00000001
       00000003 c13b66cf c12e5d5d c13eddc0 c133b9fc 00000078 c13b6342 c13eddc0
       c1000199
Call Trace:
 [<c101ac30>] printk+0x17/0x1b
 [<c13c1c49>] APIC_init+0x5a/0xf6
 [<c13b66cf>] start_kernel+0xb3/0x1cd
 [<c13b6342>] unknown_bootoption+0x0/0x1b6
Code: e4 f7 0f 30 c3 56 53 83 ec 0c 8b 1d 30 d0 ff ff a1 20 d0 ff ff c1 e8 18 0f b6 f3 83 e0 0f 0f a3 05 e0 03 3f c1 19 c0 85 c0 75 02 <0f> 0b c7 05 e0 d0 ff ff ff ff ff ff 8b 0d c4 03 3f c1 a1 d0 d0
 <0>Kernel panic - not syncing: Attempted to kill the idle task!


Thanks
Vivek
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/