Greetings;
I'm observing that the last time ntpd logged that it was synchronized
with a time src, was:
6 Aug 17:44:36 ntpd[1886]: synchronized to 140.221.8.88, stratum=1
This was about a week before I left for month long trip, and I left it
running 2.6.13-rc6 which had been stable for several days prior to my
leaving. In early September, I had to lead the missus thru a reboot
because the system time had jumped to some other time zone and the
heyu based lighting automation was afu. That seemed to fix it till I
got back on the 14th. At that time I noted that my watch appeared to be
off
by several minutes. The next day I did a 'service ntpd restart',
which backed the system time up about 4 minutes, bringing my watch a
lot closer.
Then I noticed that yesterday, before I built and installed 2.6.13.1,
that ntpd was apparently not synching. A restart, which runs ntpdate
to crash set the clocks, does work, but ntpd is not. I haven't
changed anything in the configs for ntpd in several months.
Historicly, this box has lost track of what time zone its on on
several occasions, but I believe this is a seperate problem.
Is anyone else having ntpd synch problems? Take a look at
your /var/log/ntpd.log just for grins. All I'm getting is the
restart messages, like these:
18 Sep 10:41:44 ntpd[17787]: ntpd exiting on signal 15
18 Sep 10:37:07 ntpd[29714]: running as uid(38)/gid(38)
euid(38)/egid(38).
>From the restart I just did, note the time reset of over 4 minutes.
>From the dates on my /boot/vmlinuz* files, it worked for 2.6.13-rc5,
but not for rc6 & (apparently) later.
Comments anybody?
I'm going to reboot to an older kernel (2.6.13-rc5) as a check, if
ntpd starts working, I'll advise here.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.35% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|