Mr Morton,
The hdaps driver landed in 2.6.14-rc1.
The attached patch updates the driver:
- Remove the relative input device
- Add an absolute input device
- Misc. cleanup and bug fixing
The patch is sizable due to the cleanup from removing the relative input
device (net -112 lines).
Thanks,
Robert Love
Update the hdaps driver, add absolute input device.
Signed-off-by: Robert Love <[email protected]>
drivers/hwmon/hdaps.c | 384 +++++++++++++++++---------------------------------
1 files changed, 136 insertions(+), 248 deletions(-)
diff -urN linux-2.6.14-rc1/drivers/hwmon/hdaps.c linux/drivers/hwmon/hdaps.c
--- linux-2.6.14-rc1/drivers/hwmon/hdaps.c 2005-09-14 10:42:11.000000000 -0400
+++ linux/drivers/hwmon/hdaps.c 2005-09-14 11:47:22.000000000 -0400
@@ -5,10 +5,10 @@
* Copyright (C) 2005 Jesper Juhl <[email protected]>
*
* The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad
- * T41, T42, T43, R51, and X40, at least. It provides a basic two-axis
- * accelerometer and other data, such as the device's temperature.
+ * T41, T42, T43, R50, R50p, R51, and X40, at least. It provides a basic
+ * two-axis accelerometer and other data, such as the device's temperature.
*
- * Based on the document by Mark A. Smith available at
+ * This driver is based on the document by Mark A. Smith available at
* http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial
* and error.
*
@@ -36,12 +36,7 @@
#include <asm/io.h>
#define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */
-#define HDAPS_NR_PORTS 0x30 /* 0x1600 - 0x162f */
-
-#define STATE_FRESH 0x50 /* accelerometer data is fresh */
-
-#define REFRESH_ASYNC 0x00 /* do asynchronous refresh */
-#define REFRESH_SYNC 0x01 /* do synchronous refresh */
+#define HDAPS_NR_PORTS 0x30 /* number of ports: 0x1600 - 0x162f */
#define HDAPS_PORT_STATE 0x1611 /* device state */
#define HDAPS_PORT_YPOS 0x1612 /* y-axis position */
@@ -53,7 +48,7 @@
#define HDAPS_PORT_UNKNOWN 0x161c /* what is this? */
#define HDAPS_PORT_KMACT 0x161d /* keyboard or mouse activity */
-#define HDAPS_READ_MASK 0xff /* some reads have the low 8 bits set */
+#define STATE_FRESH 0x50 /* accelerometer data is fresh */
#define KEYBD_MASK 0x20 /* set if keyboard activity */
#define MOUSE_MASK 0x40 /* set if mouse activity */
@@ -63,12 +58,10 @@
#define INIT_TIMEOUT_MSECS 4000 /* wait up to 4s for device init ... */
#define INIT_WAIT_MSECS 200 /* ... in 200ms increments */
-static struct platform_device *pdev;
-static struct input_dev hdaps_idev;
+#define HDAPS_POLL_PERIOD (HZ/20) /* poll for input every 1/20s */
+#define HDAPS_INPUT_FUZZ 4 /* input event threshold */
+
static struct timer_list hdaps_timer;
-static unsigned int hdaps_mousedev_threshold = 4;
-static unsigned long hdaps_poll_ms = 50;
-static unsigned int hdaps_mousedev;
static unsigned int hdaps_invert;
static u8 km_activity;
static int rest_x;
@@ -81,14 +74,14 @@
*/
static inline u8 __get_latch(u16 port)
{
- return inb(port) & HDAPS_READ_MASK;
+ return inb(port) & 0xff;
}
/*
- * __check_latch - Check a port latch for a given value. Callers must hold
- * hdaps_sem. Returns zero if the port contains the given value.
+ * __check_latch - Check a port latch for a given value. Returns zero if the
+ * port contains the given value. Callers must hold hdaps_sem.
*/
-static inline unsigned int __check_latch(u16 port, u8 val)
+static inline int __check_latch(u16 port, u8 val)
{
if (__get_latch(port) == val)
return 0;
@@ -99,7 +92,7 @@
* __wait_latch - Wait up to 100us for a port latch to get a certain value,
* returning zero if the value is obtained. Callers must hold hdaps_sem.
*/
-static unsigned int __wait_latch(u16 port, u8 val)
+static int __wait_latch(u16 port, u8 val)
{
unsigned int i;
@@ -109,59 +102,42 @@
udelay(5);
}
- return -EINVAL;
+ return -EIO;
}
/*
- * __device_refresh - Request a refresh from the accelerometer.
- *
- * If sync is REFRESH_SYNC, we perform a synchronous refresh and will wait.
- * Returns zero if successful and nonzero on error.
- *
- * If sync is REFRESH_ASYNC, we merely kick off a new refresh if the device is
- * not up-to-date. Always returns zero.
- *
- * Callers must hold hdaps_sem.
+ * __device_refresh - request a refresh from the accelerometer. Does not wait
+ * for refresh to complete. Callers must hold hdaps_sem.
*/
-static int __device_refresh(unsigned int sync)
+static void __device_refresh(void)
{
- u8 state;
-
- udelay(100);
-
- state = inb(0x1604);
- if (state == STATE_FRESH)
- return 0;
-
- outb(0x11, 0x1610);
- outb(0x01, 0x161f);
- if (sync == REFRESH_ASYNC)
- return 0;
+ udelay(200);
+ if (inb(0x1604) != STATE_FRESH) {
+ outb(0x11, 0x1610);
+ outb(0x01, 0x161f);
+ }
+}
+/*
+ * __device_refresh_sync - request a synchronous refresh from the
+ * accelerometer. We wait for the refresh to complete. Returns zero if
+ * successful and nonzero on error. Callers must hold hdaps_sem.
+ */
+static int __device_refresh_sync(void)
+{
+ __device_refresh();
return __wait_latch(0x1604, STATE_FRESH);
}
/*
- * __device_complete - Indicate to the accelerometer that we are done reading
+ * __device_complete - indicate to the accelerometer that we are done reading
* data, and then initiate an async refresh. Callers must hold hdaps_sem.
*/
static inline void __device_complete(void)
{
inb(0x161f);
inb(0x1604);
- __device_refresh(REFRESH_ASYNC);
-}
-
-static int __hdaps_readb_one(unsigned int port, u8 *val)
-{
- /* do a sync refresh -- we need to be sure that we read fresh data */
- if (__device_refresh(REFRESH_SYNC))
- return -EIO;
-
- *val = inb(port);
- __device_complete();
-
- return 0;
+ __device_refresh();
}
/*
@@ -174,20 +150,29 @@
int ret;
down(&hdaps_sem);
- ret = __hdaps_readb_one(port, val);
- up(&hdaps_sem);
+ /* do a sync refresh -- we need to be sure that we read fresh data */
+ ret = __device_refresh_sync();
+ if (ret)
+ goto out;
+
+ *val = inb(port);
+ __device_complete();
+
+out:
+ up(&hdaps_sem);
return ret;
}
+/* __hdaps_read_pair - internal lockless helper for hdaps_read_pair(). */
static int __hdaps_read_pair(unsigned int port1, unsigned int port2,
int *x, int *y)
{
/* do a sync refresh -- we need to be sure that we read fresh data */
- if (__device_refresh(REFRESH_SYNC))
+ if (__device_refresh_sync())
return -EIO;
- *y = inw(port2);
+ *y = inw(port2);
*x = inw(port1);
km_activity = inb(HDAPS_PORT_KMACT);
__device_complete();
@@ -217,11 +202,13 @@
return ret;
}
-/* initialize the accelerometer */
+/*
+ * hdaps_device_init - initialize the accelerometer. Returns zero on success
+ * and negative error code on failure. Can sleep.
+ */
static int hdaps_device_init(void)
{
- unsigned int total_msecs = INIT_TIMEOUT_MSECS;
- int ret = -ENXIO;
+ int total, ret = -ENXIO;
down(&hdaps_sem);
@@ -231,8 +218,10 @@
goto out;
/*
- * The 0x03 value appears to only work on some thinkpads, such as the
- * T42p. Others return 0x01.
+ * Most ThinkPads return 0x01.
+ *
+ * Others--namely the R50p, T41p, and T42p--return 0x03. These laptops
+ * have "inverted" axises.
*
* The 0x02 value occurs when the chip has been previously initialized.
*/
@@ -267,24 +256,23 @@
outb(0x01, 0x161f);
if (__wait_latch(0x161f, 0x00))
goto out;
- if (__device_refresh(REFRESH_SYNC))
+ if (__device_refresh_sync())
goto out;
if (__wait_latch(0x1611, 0x00))
goto out;
/* we have done our dance, now let's wait for the applause */
- while (total_msecs > 0) {
- u8 ignored;
+ for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
+ int x, y;
/* a read of the device helps push it into action */
- __hdaps_readb_one(HDAPS_PORT_UNKNOWN, &ignored);
+ __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y);
if (!__wait_latch(0x1611, 0x02)) {
ret = 0;
break;
}
msleep(INIT_WAIT_MSECS);
- total_msecs -= INIT_WAIT_MSECS;
}
out:
@@ -293,96 +281,6 @@
}
-/* Input class stuff */
-
-/*
- * hdaps_calibrate - Zero out our "resting" values. Callers must hold hdaps_sem.
- */
-static void hdaps_calibrate(void)
-{
- int x, y;
-
- if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
- return;
-
- rest_x = x;
- rest_y = y;
-}
-
-static void hdaps_mousedev_poll(unsigned long unused)
-{
- int x, y;
-
- /* Cannot sleep. Try nonblockingly. If we fail, try again later. */
- if (down_trylock(&hdaps_sem)) {
- mod_timer(&hdaps_timer,jiffies+msecs_to_jiffies(hdaps_poll_ms));
- return;
- }
-
- if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
- goto out;
-
- x -= rest_x;
- y -= rest_y;
- if (abs(x) > hdaps_mousedev_threshold)
- input_report_rel(&hdaps_idev, REL_X, x);
- if (abs(y) > hdaps_mousedev_threshold)
- input_report_rel(&hdaps_idev, REL_Y, y);
- input_sync(&hdaps_idev);
-
- mod_timer(&hdaps_timer, jiffies + msecs_to_jiffies(hdaps_poll_ms));
-
-out:
- up(&hdaps_sem);
-}
-
-/*
- * hdaps_mousedev_enable - enable the input class device. Can sleep.
- */
-static void hdaps_mousedev_enable(void)
-{
- down(&hdaps_sem);
-
- /* calibrate the device before enabling */
- hdaps_calibrate();
-
- /* initialize the input class */
- init_input_dev(&hdaps_idev);
- hdaps_idev.dev = &pdev->dev;
- hdaps_idev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- hdaps_idev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- hdaps_idev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT);
- input_register_device(&hdaps_idev);
-
- /* start up our timer */
- init_timer(&hdaps_timer);
- hdaps_timer.function = hdaps_mousedev_poll;
- hdaps_timer.expires = jiffies + msecs_to_jiffies(hdaps_poll_ms);
- add_timer(&hdaps_timer);
-
- hdaps_mousedev = 1;
-
- up(&hdaps_sem);
-
- printk(KERN_INFO "hdaps: input device enabled.\n");
-}
-
-/*
- * hdaps_mousedev_disable - disable the input class device. Caller must hold
- * hdaps_sem.
- */
-static void hdaps_mousedev_disable(void)
-{
- down(&hdaps_sem);
- if (hdaps_mousedev) {
- hdaps_mousedev = 0;
- del_timer_sync(&hdaps_timer);
- input_unregister_device(&hdaps_idev);
- }
- up(&hdaps_sem);
-}
-
-
/* Device model stuff */
static int hdaps_probe(struct device *dev)
@@ -404,14 +302,69 @@
return 0;
}
+/* dummy release function -- everything is static, nothing to free */
+static void hdaps_dummy_release(struct device *dev) { }
+
static struct device_driver hdaps_driver = {
.name = "hdaps",
.bus = &platform_bus_type,
- .owner = THIS_MODULE,
.probe = hdaps_probe,
.resume = hdaps_resume
};
+static struct platform_device pdev = {
+ .name = "hdaps",
+ .id = -1,
+ .dev = {
+ .release = hdaps_dummy_release,
+ },
+};
+
+
+/* Input class stuff */
+
+static struct input_dev hdaps_idev = {
+ .name = "hdaps",
+ .dev = &pdev.dev,
+ .evbit = { BIT(EV_ABS) },
+ .absbit = { BIT(ABS_X) | BIT(ABS_Y) },
+ .absmin = { [ABS_X] = -256, [ABS_Y] = -256 },
+ .absmax = { [ABS_X] = 256, [ABS_Y] = 256 },
+ .absfuzz = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+ .absflat = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+};
+
+/*
+ * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_sem.
+ */
+static void hdaps_calibrate(void)
+{
+ __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y);
+}
+
+static void hdaps_mousedev_poll(unsigned long unused)
+{
+ int x, y;
+
+ /* Cannot sleep. Try nonblockingly. If we fail, try again later. */
+ if (down_trylock(&hdaps_sem)) {
+ mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
+ return;
+ }
+
+ if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
+ goto out;
+
+ input_report_abs(&hdaps_idev, ABS_X, x - rest_x);
+ input_report_abs(&hdaps_idev, ABS_Y, y - rest_y);
+ input_sync(&hdaps_idev);
+
+ mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
+
+out:
+ up(&hdaps_sem);
+}
+
/* Sysfs Files */
@@ -517,69 +470,6 @@
return count;
}
-static ssize_t hdaps_mousedev_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", hdaps_mousedev);
-}
-
-static ssize_t hdaps_mousedev_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int enable;
-
- if (sscanf(buf, "%d", &enable) != 1)
- return -EINVAL;
-
- if (enable == 1)
- hdaps_mousedev_enable();
- else if (enable == 0)
- hdaps_mousedev_disable();
- else
- return -EINVAL;
-
- return count;
-}
-
-static ssize_t hdaps_poll_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%lu\n", hdaps_poll_ms);
-}
-
-static ssize_t hdaps_poll_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned int poll;
-
- if (sscanf(buf, "%u", &poll) != 1 || poll == 0)
- return -EINVAL;
- hdaps_poll_ms = poll;
-
- return count;
-}
-
-static ssize_t hdaps_threshold_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%u\n", hdaps_mousedev_threshold);
-}
-
-static ssize_t hdaps_threshold_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned int threshold;
-
- if (sscanf(buf, "%u", &threshold) != 1 || threshold == 0)
- return -EINVAL;
- hdaps_mousedev_threshold = threshold;
-
- return count;
-}
-
static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL);
static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL);
static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL);
@@ -588,10 +478,6 @@
static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL);
static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store);
static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store);
-static DEVICE_ATTR(mousedev, 0644, hdaps_mousedev_show, hdaps_mousedev_store);
-static DEVICE_ATTR(mousedev_poll_ms, 0644, hdaps_poll_show, hdaps_poll_store);
-static DEVICE_ATTR(mousedev_threshold, 0644, hdaps_threshold_show,
- hdaps_threshold_store);
static struct attribute *hdaps_attributes[] = {
&dev_attr_position.attr,
@@ -601,9 +487,6 @@
&dev_attr_keyboard_activity.attr,
&dev_attr_mouse_activity.attr,
&dev_attr_calibrate.attr,
- &dev_attr_mousedev.attr,
- &dev_attr_mousedev_threshold.attr,
- &dev_attr_mousedev_poll_ms.attr,
&dev_attr_invert.attr,
NULL,
};
@@ -619,7 +502,7 @@
* XXX: We should be able to return nonzero and halt the detection process.
* But there is a bug in dmi_check_system() where a nonzero return from the
* first match will result in a return of failure from dmi_check_system().
- * I fixed this; the patch is in 2.6-mm. Once in Linus's tree we can make
+ * I fixed this; the patch is 2.6-git. Once in a released tree, we can make
* hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1.
*/
static int hdaps_dmi_match(struct dmi_system_id *id)
@@ -668,6 +551,7 @@
HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
+ HDAPS_DMI_MATCH_NORMAL("ThinkPad X41 Tablet"),
{ .ident = NULL }
};
@@ -686,24 +570,31 @@
if (ret)
goto out_region;
- pdev = platform_device_register_simple("hdaps", -1, NULL, 0);
- if (IS_ERR(pdev)) {
- ret = PTR_ERR(pdev);
+ ret = platform_device_register(&pdev);
+ if (ret)
goto out_driver;
- }
- ret = sysfs_create_group(&pdev->dev.kobj, &hdaps_attribute_group);
+ ret = sysfs_create_group(&pdev.dev.kobj, &hdaps_attribute_group);
if (ret)
goto out_device;
- if (hdaps_mousedev)
- hdaps_mousedev_enable();
+ /* initial calibrate for the input device */
+ hdaps_calibrate();
+
+ /* initialize the input class */
+ input_register_device(&hdaps_idev);
+
+ /* start up our timer for the input device */
+ init_timer(&hdaps_timer);
+ hdaps_timer.function = hdaps_mousedev_poll;
+ hdaps_timer.expires = jiffies + HDAPS_POLL_PERIOD;
+ add_timer(&hdaps_timer);
printk(KERN_INFO "hdaps: driver successfully loaded.\n");
return 0;
out_device:
- platform_device_unregister(pdev);
+ platform_device_unregister(&pdev);
out_driver:
driver_unregister(&hdaps_driver);
out_region:
@@ -715,10 +606,10 @@
static void __exit hdaps_exit(void)
{
- hdaps_mousedev_disable();
-
- sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
- platform_device_unregister(pdev);
+ del_timer_sync(&hdaps_timer);
+ input_unregister_device(&hdaps_idev);
+ sysfs_remove_group(&pdev.dev.kobj, &hdaps_attribute_group);
+ platform_device_unregister(&pdev);
driver_unregister(&hdaps_driver);
release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
@@ -728,9 +619,6 @@
module_init(hdaps_init);
module_exit(hdaps_exit);
-module_param_named(mousedev, hdaps_mousedev, bool, 0);
-MODULE_PARM_DESC(mousedev, "enable the input class device");
-
module_param_named(invert, hdaps_invert, bool, 0);
MODULE_PARM_DESC(invert, "invert data along each axis");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |