Signed-off-by: Luben Tuikov <[email protected]>
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/drivers/scsi/sas-class/sas_discover.c linux-2.6.13/drivers/scsi/sas-class/sas_discover.c
--- linux-2.6.13-orig/drivers/scsi/sas-class/sas_discover.c 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/drivers/scsi/sas-class/sas_discover.c 2005-09-09 11:14:29.000000000 -0400
@@ -0,0 +1,1577 @@
+/*
+ * Serial Attached SCSI (SAS) Discover process
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/sas-class/sas_discover.c#130 $
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include "sas_internal.h"
+#include <scsi/sas/sas_task.h>
+#include <scsi/sas/sas_discover.h>
+
+/* ---------- Domain device attributes ---------- */
+
+ssize_t dev_show_type(struct domain_device *dev, char *page)
+{
+ static const char *dev_type[] = {
+ "no device",
+ "end device",
+ "edge expander",
+ "fanout expander",
+ "host adapter",
+ "sata device",
+ "sata port multiplier",
+ "sata port multiplier port",
+ };
+ return sprintf(page, "%s\n", dev_type[dev->dev_type]);
+}
+
+ssize_t dev_show_iproto(struct domain_device *dev, char *page)
+{
+ return sas_show_proto(dev->iproto, page);
+}
+
+ssize_t dev_show_tproto(struct domain_device *dev, char *page)
+{
+ return sas_show_proto(dev->tproto, page);
+}
+
+ssize_t dev_show_sas_addr(struct domain_device *dev, char *page)
+{
+ return sprintf(page, "%llx\n", SAS_ADDR(dev->sas_addr));
+}
+
+ssize_t dev_show_linkrate(struct domain_device *dev, char *page)
+{
+ return sas_show_linkrate(dev->linkrate, page);
+}
+
+ssize_t dev_show_min_linkrate(struct domain_device *dev, char *page)
+{
+ return sas_show_linkrate(dev->min_linkrate, page);
+}
+
+ssize_t dev_show_max_linkrate(struct domain_device *dev, char *page)
+{
+ return sas_show_linkrate(dev->max_linkrate, page);
+}
+
+ssize_t dev_show_pathways(struct domain_device *dev, char *page)
+{
+ return sprintf(page, "%d\n", dev->pathways);
+}
+
+/* ---------- SATA specific sysfs ---------- */
+
+static ssize_t sata_show_command_set(struct domain_device *dev, char *page)
+{
+ static const char *cs[] = {
+ "ATA",
+ "ATAPI",
+ };
+ return sprintf(page, "%s\n", cs[dev->sata_dev.command_set]);
+}
+
+static ssize_t sata_show_rps_resp(struct domain_device *dev, char *page)
+{
+ char *buf = page;
+ if ((dev->tproto & SAS_PROTO_STP) &&
+ dev->sata_dev.rps_resp.frame_type == SMP_RESPONSE &&
+ dev->sata_dev.rps_resp.function == SMP_REPORT_PHY_SATA &&
+ dev->sata_dev.rps_resp.result == SMP_RESP_FUNC_ACC) {
+ int i = 0;
+ u8 *p = (u8 *) &dev->sata_dev.rps_resp;
+ for (i = 0; i < sizeof(struct smp_resp); i+=4, p+=4) {
+ buf += sprintf(buf, "%02x %02x %02x %02x\n",
+ *(p+0), *(p+1), *(p+2), *(p+3));
+ }
+ }
+ return buf-page;
+}
+
+static inline int show_chars(__le16 *p, int start, int words, char *page)
+{
+ int i;
+ char *buf = page;
+
+ for (i = start; i < start+words; i++) {
+ u16 s = le16_to_cpu(p[i]);
+ char a = (s&0xFF00)>>8;
+ char b = s&0x00FF;
+
+ if (a == 0)
+ break;
+ buf += sprintf(buf, "%c", a);
+ if (b == 0)
+ break;
+ buf += sprintf(buf, "%c", b);
+
+ }
+ return buf-page;
+}
+
+static ssize_t sata_show_serial_number(struct domain_device *dev, char *page)
+{
+ char *buf = page;
+ __le16 *identify_x = NULL;
+
+ if (dev->sata_dev.command_set == ATA_COMMAND_SET)
+ identify_x = dev->sata_dev.identify_device;
+ else
+ identify_x = dev->sata_dev.identify_packet_device;
+
+ if (identify_x &&
+ (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT)) {
+ buf += show_chars(identify_x, 10, 10, buf);
+ buf += sprintf(buf, "\n");
+ }
+ return buf-page;
+}
+
+static ssize_t sata_show_firmware_rev(struct domain_device *dev, char *page)
+{
+ char *buf = page;
+ __le16 *identify_x = NULL;
+
+ if (dev->sata_dev.command_set == ATA_COMMAND_SET)
+ identify_x = dev->sata_dev.identify_device;
+ else
+ identify_x = dev->sata_dev.identify_packet_device;
+
+ if (identify_x &&
+ (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT)) {
+ buf += show_chars(identify_x, 23, 4, buf);
+ buf += sprintf(buf, "\n");
+ }
+ return buf-page;
+}
+
+static ssize_t sata_show_model_number(struct domain_device *dev, char *page)
+{
+ char *buf = page;
+ __le16 *identify_x = NULL;
+
+ if (dev->sata_dev.command_set == ATA_COMMAND_SET)
+ identify_x = dev->sata_dev.identify_device;
+ else
+ identify_x = dev->sata_dev.identify_packet_device;
+
+ if (identify_x &&
+ (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT)) {
+ buf += show_chars(identify_x, 27, 20, buf);
+ buf += sprintf(buf, "\n");
+ }
+ return buf-page;
+}
+
+static ssize_t sata_show_identify_device(struct domain_device *dev, char *page)
+{
+ char *buf = page;
+
+ if (dev->sata_dev.identify_device &&
+ (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT)) {
+ __le16 *p = dev->sata_dev.identify_device;
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ int k;
+ for (k = 0; k < 16; k++)
+ buf += sprintf(buf, "%04x%s",
+ le16_to_cpu(p[i*16+k]),
+ k==15 ? "\n" : " ");
+ }
+ }
+ return buf-page;
+}
+
+static ssize_t sata_show_identify_packet(struct domain_device *dev, char *page)
+{
+ char *buf = page;
+
+ if (dev->sata_dev.identify_packet_device &&
+ (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT)) {
+ __le16 *p = dev->sata_dev.identify_packet_device;
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ int k;
+ for (k = 0; k < 16; k++)
+ buf += sprintf(buf, "%04x%s",
+ le16_to_cpu(p[i*16+k]),
+ k==15 ? "\n" : " ");
+ }
+ }
+
+ return buf-page;
+}
+
+static ssize_t sata_show_port_no(struct domain_device *dev, char *page)
+{
+ int res = 0;
+
+ if (dev->dev_type == SATA_PM || dev->dev_type == SATA_PM_PORT)
+ res = sprintf(page, "%02Xh\n", dev->sata_dev.port_no);
+ return res;
+}
+
+/* ---------- SAS end device specific ---------- */
+
+static ssize_t sas_show_rled_meaning(struct domain_device *dev, char *page)
+{
+ return sprintf(page, "%d\n", dev->end_dev.ready_led_meaning);
+}
+
+static ssize_t sas_show_itnl_timeout(struct domain_device *dev, char *page)
+{
+ return sprintf(page, "0x%04x\n", dev->end_dev.itnl_timeout);
+}
+
+static ssize_t sas_show_iresp_timeout(struct domain_device *dev, char *page)
+{
+ return sprintf(page, "0x%04x\n", dev->end_dev.iresp_timeout);
+}
+
+static ssize_t sas_show_rl_wlun(struct domain_device *dev, char *page)
+{
+ return sprintf(page, "%d\n", dev->end_dev.rl_wlun);
+}
+
+/* ---------- LU specific ---------- */
+
+static ssize_t lu_show_lun(struct LU *lu, char *page)
+{
+ return sprintf(page, "%016llx\n", SAS_ADDR(lu->LUN));
+}
+
+static ssize_t lu_show_inq(struct LU *lu, char *_page)
+{
+ int i;
+ char *buf = _page;
+ if (lu->inquiry_valid_data_len <= 0)
+ return 0;
+ for (i = 0; i < lu->inquiry_valid_data_len; i += 4) {
+ buf += sprintf(buf, "%02x %02x %02x %02x\n",
+ lu->inquiry_data[i+0], lu->inquiry_data[i+1],
+ lu->inquiry_data[i+2], lu->inquiry_data[i+3]);
+ }
+
+ return buf-_page;
+}
+
+static ssize_t lu_show_tm_type(struct LU *lu, char *page)
+{
+ static const char *tm_type[] = {
+ "none",
+ "full",
+ "basic",
+ };
+ return sprintf(page, "%s\n", tm_type[lu->tm_type]);
+}
+
+static ssize_t lu_show_channel(struct LU *lu, char *page)
+{
+ if (lu->uldd_dev)
+ return sprintf(page, "%d\n", lu->map.channel);
+ return 0;
+}
+
+static ssize_t lu_show_id(struct LU *lu, char *page)
+{
+ if (lu->uldd_dev)
+ return sprintf(page, "%d\n", lu->map.id);
+ return 0;
+}
+
+/* ---------- Sysfs attribute implementation ---------- */
+
+struct lu_dev_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct LU *lu, char *);
+ ssize_t (*store)(struct LU *lu, const char *, size_t);
+};
+
+static struct lu_dev_attribute lu_attrs[] = {
+ __ATTR(lun, 0444, lu_show_lun, NULL),
+ __ATTR(inquiry_data, 0444, lu_show_inq, NULL),
+ __ATTR(channel, 0444, lu_show_channel, NULL),
+ __ATTR(id, 0444, lu_show_id, NULL),
+ __ATTR(task_management, 0444, lu_show_tm_type, NULL),
+ __ATTR_NULL,
+};
+
+static struct domain_dev_attribute dev_attrs[] = {
+ __ATTR(dev_type, 0444, dev_show_type, NULL),
+ __ATTR(iproto, 0444, dev_show_iproto, NULL),
+ __ATTR(tproto, 0444, dev_show_tproto, NULL),
+ __ATTR(sas_addr, 0444, dev_show_sas_addr, NULL),
+ __ATTR(ready_led_meaning, 0444, sas_show_rled_meaning, NULL),
+ __ATTR(itnl_timeout, 0444, sas_show_itnl_timeout, NULL),
+ __ATTR(iresp_timeout, 0444, sas_show_iresp_timeout, NULL),
+ __ATTR(rl_wlun, 0444, sas_show_rl_wlun, NULL),
+ __ATTR(linkrate, 0444, dev_show_linkrate, NULL),
+ __ATTR(min_linkrate, 0444, dev_show_min_linkrate, NULL),
+ __ATTR(max_linkrate, 0444, dev_show_max_linkrate, NULL),
+ __ATTR(pathways, 0444, dev_show_pathways, NULL),
+ __ATTR_NULL,
+};
+
+static struct domain_dev_attribute sata_attrs[] = {
+ __ATTR(dev_type, 0444, dev_show_type, NULL),
+ __ATTR(iproto, 0444, dev_show_iproto, NULL),
+ __ATTR(tproto, 0444, dev_show_tproto, NULL),
+ __ATTR(sas_addr, 0444, dev_show_sas_addr, NULL),
+ __ATTR(linkrate, 0444, dev_show_linkrate, NULL),
+ __ATTR(min_linkrate, 0444, dev_show_min_linkrate, NULL),
+ __ATTR(max_linkrate, 0444, dev_show_max_linkrate, NULL),
+ __ATTR(command_set, 0444, sata_show_command_set, NULL),
+ __ATTR(report_phy_sata_resp, 0444, sata_show_rps_resp, NULL),
+ __ATTR(serial_number, 0444, sata_show_serial_number, NULL),
+ __ATTR(firmware_rev, 0444, sata_show_firmware_rev, NULL),
+ __ATTR(model_number, 0444, sata_show_model_number, NULL),
+ __ATTR(identify_device, 0444, sata_show_identify_device, NULL),
+ __ATTR(identify_packet_device, 0444, sata_show_identify_packet, NULL),
+ __ATTR(port_no, 0444, sata_show_port_no, NULL),
+ __ATTR_NULL,
+};
+
+static void end_dev_release(struct kobject *obj)
+{
+ struct domain_device *dev = to_dom_device(obj);
+ BUG_ON(!list_empty(&dev->end_dev.LU_list));
+ SAS_DPRINTK("freeing dev %llx\n", SAS_ADDR(dev->sas_addr));
+ kfree(dev);
+}
+
+static void sata_dev_release(struct kobject *obj)
+{
+ struct domain_device *dev = to_dom_device(obj);
+
+ SAS_DPRINTK("freeing SATA dev %llx\n", SAS_ADDR(dev->sas_addr));
+ if (dev->sata_dev.identify_device) {
+ void *p = dev->sata_dev.identify_device;
+ mb();
+ dev->sata_dev.identify_device = NULL;
+ kfree(p);
+ }
+ if (dev->sata_dev.identify_packet_device) {
+ void *p = dev->sata_dev.identify_packet_device;
+ mb();
+ dev->sata_dev.identify_packet_device = NULL;
+ kfree(p);
+ }
+ kfree(dev);
+}
+
+static void sas_lu_release(struct kobject *obj)
+{
+ struct LU *lu = to_lu_device(obj);
+ SAS_DPRINTK("freeing LUN %016llx\n", SAS_ADDR(lu->LUN));
+ sas_release_scsi_id(lu->parent->port, lu->map.id);
+ kfree(lu);
+}
+
+static ssize_t dev_show_attr(struct kobject *kobj, struct attribute *attr,
+ char *page)
+{
+ ssize_t ret = 0;
+ struct domain_device *dev = to_dom_device(kobj);
+ struct domain_dev_attribute *dev_attr = to_dev_attr(attr);
+
+ if (dev_attr->show)
+ ret = dev_attr->show(dev, page);
+ return ret;
+}
+
+static ssize_t lu_show_attr(struct kobject *obj, struct attribute *attr,
+ char *page)
+{
+ ssize_t ret = 0;
+ struct LU *lu = to_lu_device(obj);
+ struct lu_dev_attribute *lu_attr = to_lu_attr(attr);
+
+ if (lu_attr->show)
+ ret = lu_attr->show(lu, page);
+ return ret;
+}
+
+struct sysfs_ops dev_sysfs_ops = {
+ .show = dev_show_attr,
+};
+static struct sysfs_ops lu_sysfs_ops = {
+ .show = lu_show_attr,
+};
+
+static struct attribute *end_dev_attrs[ARRAY_SIZE(dev_attrs)];
+static struct attribute *sata_dev_attrs[ARRAY_SIZE(sata_attrs)];
+static struct attribute *lu_dev_attrs[ARRAY_SIZE(lu_attrs)];
+
+static struct kobj_type end_dev_ktype = {
+ .release = end_dev_release,
+ .sysfs_ops = &dev_sysfs_ops,
+ .default_attrs = end_dev_attrs,
+};
+static struct kobj_type sata_dev_ktype = {
+ .release = sata_dev_release,
+ .sysfs_ops = &dev_sysfs_ops,
+ .default_attrs = sata_dev_attrs,
+};
+static struct kobj_type lu_dev_ktype = {
+ .release = sas_lu_release,
+ .sysfs_ops = &lu_sysfs_ops,
+ .default_attrs = lu_dev_attrs,
+};
+
+struct kobj_type *dev_ktype[] = {
+ NULL,
+ &end_dev_ktype,
+ &ex_dev_ktype,
+ &ex_dev_ktype,
+ NULL,
+ &sata_dev_ktype,
+ NULL,
+ NULL,
+};
+
+/* ---------- Basic task processing for discovery purposes ---------- */
+
+static void sas_task_timedout(unsigned long _task)
+{
+ struct sas_task *task = (void *) _task;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ complete(&task->completion);
+}
+
+static void sas_disc_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+#define SAS_DEV_TIMEOUT 10
+
+/**
+ * sas_execute_task -- Basic task processing for discovery
+ * @task: the task to be executed
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_execute_task(struct sas_task *task, void *buffer, int size,
+ int pci_dma_dir)
+{
+ int res = 0;
+ struct scatterlist *scatter = NULL;
+ struct task_status_struct *ts = &task->task_status;
+ int num_scatter = 0;
+ int retries = 0;
+
+ if (pci_dma_dir != PCI_DMA_NONE) {
+ scatter = kmalloc(sizeof(*scatter), GFP_KERNEL);
+ if (!scatter)
+ goto out;
+ memset(scatter, 0, sizeof(scatter));
+
+ sg_init_one(scatter, buffer, size);
+ num_scatter = 1;
+ }
+
+ task->task_proto = task->dev->tproto;
+ task->scatter = scatter;
+ task->num_scatter = num_scatter;
+ task->total_xfer_len = size;
+ task->data_dir = pci_dma_dir;
+ task->task_done = sas_disc_task_done;
+
+ for (retries = 0; retries < 5; retries++) {
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_completion(&task->completion);
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = sas_task_timedout;
+ task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = task->dev->port->ha->lldd_execute_task(task, 1,
+ GFP_KERNEL);
+ if (res) {
+ del_timer(&task->timer);
+ SAS_DPRINTK("executing SAS discovery task failed:%d\n",
+ res);
+ goto ex_err;
+ }
+ wait_for_completion(&task->completion);
+ res = -ETASK;
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ int res2;
+ SAS_DPRINTK("task aborted, flags:0x%x\n",
+ task->task_state_flags);
+ res2 = task->dev->port->ha->lldd_abort_task(task);
+ SAS_DPRINTK("came back from abort task\n");
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ if (res2 == TMF_RESP_FUNC_COMPLETE)
+ continue; /* Retry the task */
+ else
+ goto ex_err;
+ }
+ }
+ if (task->task_status.stat == SAM_BUSY ||
+ task->task_status.stat == SAM_TASK_SET_FULL ||
+ task->task_status.stat == SAS_QUEUE_FULL) {
+ SAS_DPRINTK("task: q busy, sleeping...\n");
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ } else if (task->task_status.stat == SAM_CHECK_COND) {
+ struct scsi_sense_hdr shdr;
+
+ if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
+ &shdr)) {
+ SAS_DPRINTK("couldn't normalize sense\n");
+ continue;
+ }
+ if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
+ (shdr.sense_key == 2 && shdr.asc == 4 &&
+ shdr.ascq == 1)) {
+ SAS_DPRINTK("device %016llx LUN: %016llx "
+ "powering up or not ready yet, "
+ "sleeping...\n",
+ SAS_ADDR(task->dev->sas_addr),
+ SAS_ADDR(task->ssp_task.LUN));
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(5*HZ);
+ } else if (shdr.sense_key == 1) {
+ res = 0;
+ break;
+ } else if (shdr.sense_key == 5) {
+ break;
+ } else {
+ SAS_DPRINTK("dev %016llx LUN: %016llx "
+ "sense key:0x%x ASC:0x%x ASCQ:0x%x"
+ "\n",
+ SAS_ADDR(task->dev->sas_addr),
+ SAS_ADDR(task->ssp_task.LUN),
+ shdr.sense_key,
+ shdr.asc, shdr.ascq);
+ }
+ } else if (task->task_status.resp != SAS_TASK_COMPLETE ||
+ task->task_status.stat != SAM_GOOD) {
+ SAS_DPRINTK("task finished with resp:0x%x, "
+ "stat:0x%x\n",
+ task->task_status.resp,
+ task->task_status.stat);
+ goto ex_err;
+ } else {
+ res = 0;
+ break;
+ }
+ }
+ex_err:
+ if (pci_dma_dir != PCI_DMA_NONE)
+ kfree(scatter);
+out:
+ return res;
+}
+
+/* ---------- Domain device discovery ---------- */
+
+/**
+ * sas_get_port_device -- Discover devices which caused port creation
+ * @port: pointer to struct sas_port of interest
+ *
+ * Devices directly attached to a HA port, have no parent. This is
+ * how we know they are (domain) "root" devices. All other devices
+ * do, and should have their "parent" pointer set appropriately as
+ * soon as a child device is discovered.
+ */
+static int sas_get_port_device(struct sas_port *port)
+{
+ unsigned long flags;
+ struct sas_phy *phy;
+ struct domain_device *dev;
+
+ dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ memset(dev, 0, sizeof(*dev));
+
+ spin_lock_irqsave(&port->phy_list_lock, flags);
+ if (list_empty(&port->phy_list)) {
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+ kfree(dev);
+ return -ENODEV;
+ }
+ phy = container_of(port->phy_list.next, struct sas_phy, port_phy_el);
+ spin_lock(&phy->frame_rcvd_lock);
+ memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd),
+ (size_t)phy->frame_rcvd_size));
+ spin_unlock(&phy->frame_rcvd_lock);
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+
+ if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) {
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+ if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
+ fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
+ && (fis->device & ~0x10) == 0)
+ dev->dev_type = SATA_PM;
+ else
+ dev->dev_type = SATA_DEV;
+ dev->tproto = SATA_PROTO;
+ } else {
+ struct sas_identify_frame *id =
+ (struct sas_identify_frame *) dev->frame_rcvd;
+ dev->dev_type = id->dev_type;
+ dev->iproto = id->initiator_bits;
+ dev->tproto = id->target_bits;
+ }
+
+ sas_init_dev(dev);
+
+ memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+ port->port_dev = dev;
+ dev->port = port;
+ dev->linkrate = port->linkrate;
+ dev->min_linkrate = port->linkrate;
+ dev->max_linkrate = port->linkrate;
+ dev->pathways = port->num_phys;
+ memset(port->disc.fanout_sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE);
+ port->disc.max_level = 0;
+
+ return 0;
+}
+
+/* ---------- Discover and Revalidate ---------- */
+
+/* ---------- SATA ---------- */
+
+static inline void sas_get_ata_command_set(struct domain_device *dev)
+{
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+
+ if ((fis->sector_count == 1 && /* ATA */
+ fis->lbal == 1 &&
+ fis->lbam == 0 &&
+ fis->lbah == 0 &&
+ fis->device == 0))
+
+ dev->sata_dev.command_set = ATA_COMMAND_SET;
+
+ else if ((fis->interrupt_reason == 1 && /* ATAPI */
+ fis->lbal == 1 &&
+ fis->byte_count_low == 0x14 &&
+ fis->byte_count_high == 0xEB &&
+ (fis->device & ~0x10) == 0))
+
+ dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+
+ else if ((fis->sector_count == 1 && /* SEMB */
+ fis->lbal == 1 &&
+ fis->lbam == 0x3C &&
+ fis->lbah == 0xC3 &&
+ fis->device == 0)
+ ||
+ (fis->interrupt_reason == 1 && /* SATA PM */
+ fis->lbal == 1 &&
+ fis->byte_count_low == 0x69 &&
+ fis->byte_count_high == 0x96 &&
+ (fis->device & ~0x10) == 0))
+
+ dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+}
+
+/**
+ * sas_issue_ata_cmd -- Basic SATA command processing for discovery
+ * @dev: the device to send the command to
+ * @command: the command register
+ * @features: the features register
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
+ u8 features, void *buffer, int size,
+ int pci_dma_dir)
+{
+ int res = 0;
+ struct sas_task *task;
+ struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
+ &dev->frame_rcvd[0];
+
+ res = -ENOMEM;
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ goto out;
+
+ task->dev = dev;
+
+ task->ata_task.fis.command = command;
+ task->ata_task.fis.features = features;
+ task->ata_task.fis.device = d2h_fis->device;
+ task->ata_task.retry_count = 1;
+
+ res = sas_execute_task(task, buffer, size, pci_dma_dir);
+
+ sas_free_task(task);
+out:
+ return res;
+}
+
+static void sas_sata_propagate_sas_addr(struct domain_device *dev)
+{
+ unsigned long flags;
+ struct sas_port *port = dev->port;
+ struct sas_phy *phy;
+
+ BUG_ON(dev->parent);
+
+ memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+ spin_lock_irqsave(&port->phy_list_lock, flags);
+ list_for_each_entry(phy, &port->phy_list, port_phy_el)
+ memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+}
+
+#define ATA_IDENTIFY_DEV 0xEC
+#define ATA_IDENTIFY_PACKET_DEV 0xA1
+#define ATA_SET_FEATURES 0xEF
+#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
+
+/**
+ * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
+ * @dev: STP/SATA device of interest (ATA/ATAPI)
+ *
+ * The LLDD has already been notified of this device, so that we can
+ * send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY
+ * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
+ * performance for this device.
+ */
+static int sas_discover_sata_dev(struct domain_device *dev)
+{
+ int res;
+ __le16 *identify_x;
+ u8 command;
+
+ identify_x = kmalloc(512, GFP_KERNEL);
+ if (!identify_x)
+ return -ENOMEM;
+ memset(identify_x, 0, 512);
+
+ if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
+ dev->sata_dev.identify_device = identify_x;
+ command = ATA_IDENTIFY_DEV;
+ } else {
+ dev->sata_dev.identify_packet_device = identify_x;
+ command = ATA_IDENTIFY_PACKET_DEV;
+ }
+
+ res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+ PCI_DMA_FROMDEVICE);
+ if (res)
+ goto out_err;
+
+ /* lives on the media? */
+ if (le16_to_cpu(identify_x[0]) & 4) {
+ /* incomplete response */
+ SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
+ "dev %llx\n", SAS_ADDR(dev->sas_addr));
+ if (!le16_to_cpu(identify_x[83] & (1<<6)))
+ goto cont1;
+ res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
+ ATA_FEATURE_PUP_STBY_SPIN_UP,
+ NULL, 0, PCI_DMA_NONE);
+ if (res)
+ goto cont1;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(5*HZ); /* More time? */
+ res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+ PCI_DMA_FROMDEVICE);
+ if (res)
+ goto out_err;
+ }
+cont1:
+ /* Get WWN */
+ if (dev->port->oob_mode != SATA_OOB_MODE) {
+ memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
+ SAS_ADDR_SIZE);
+ } else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
+ (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
+ == 0x5000) {
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ dev->sas_addr[2*i] =
+ (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
+ dev->sas_addr[2*i+1] =
+ le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
+ }
+ }
+ sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+ if (!dev->parent)
+ sas_sata_propagate_sas_addr(dev);
+
+ return 0;
+out_err:
+ dev->sata_dev.identify_packet_device = NULL;
+ dev->sata_dev.identify_device = NULL;
+ kfree(identify_x);
+ return res;
+}
+
+static int sas_discover_sata_pm(struct domain_device *dev)
+{
+ return -ENODEV;
+}
+
+/* ---------- SAS end devices ---------- */
+
+static int sas_get_itnl_timeout(struct domain_device *dev)
+{
+ static const u8 mode_sense_6[16] = { 0x1a, };
+ static const u8 mode_sense_10[16] = { 0x5a, };
+
+ int res = -ENOMEM;
+ struct sas_task *task;
+ u8 *buffer, *__buf;
+ const int buffer_size = 12;
+
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ return -ENOMEM;
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!buffer)
+ goto out;
+ __buf = buffer;
+
+ task->dev = dev;
+
+ task->ssp_task.retry_count = 1;
+ memcpy(task->ssp_task.cdb, mode_sense_6, 16);
+ task->ssp_task.cdb[1] |= (1 << 3);
+ task->ssp_task.cdb[2] = 0x19;
+ task->ssp_task.cdb[4] = buffer_size;
+
+ res = sas_execute_task(task, buffer, buffer_size, PCI_DMA_FROMDEVICE);
+ if (res) {
+ SAS_DPRINTK("task to device %llx returned stat 0x%x for "
+ "MODE SENSE 6\n",
+ SAS_ADDR(dev->sas_addr), task->task_status.stat);
+ memcpy(task->ssp_task.cdb, mode_sense_10, 16);
+ task->ssp_task.cdb[1] |= (1 << 3);
+ task->ssp_task.cdb[2] = 0x19;
+ task->ssp_task.cdb[8] = buffer_size;
+
+ res = sas_execute_task(task, buffer, buffer_size,
+ PCI_DMA_FROMDEVICE);
+ if (res) {
+ SAS_DPRINTK("task to device %llx returned stat 0x%x "
+ "for MODE SENSE 10\n",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.stat);
+ goto out_buf;
+ }
+ dev->end_dev.ms_10 = 1;
+ buffer += 4;
+ }
+
+ buffer += 4; /* skip mode parameter header */
+
+ dev->end_dev.ready_led_meaning = (buffer[2] & (1<<4)) ? 1 : 0;
+ dev->end_dev.itnl_timeout = be16_to_cpu(*(__be16 *)(buffer+4));
+ dev->end_dev.iresp_timeout= be16_to_cpu(*(__be16 *)(buffer+6));
+
+ res = 0;
+
+out_buf:
+ kfree(__buf);
+out:
+ sas_free_task(task);
+ return res;
+}
+
+static int sas_get_report_luns(struct domain_device *dev, u8 **buffer,
+ int *size)
+{
+ static const u8 report_luns[16] = { 0xA0, };
+ static const u8 RL_WLUN[8] = { 0xC1, 0x01, };
+
+ int res = -ENOMEM;
+ struct sas_task *task;
+ u8 *buf;
+ int buffer_size = 16;
+ u32 len;
+
+ *buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!*buffer)
+ return -ENOMEM;
+ buf = *buffer;
+
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ goto out_err;
+
+ task->dev = dev;
+ task->ssp_task.retry_count = 1;
+ memcpy(task->ssp_task.cdb, report_luns, 16);
+ *(__be32 *)(&task->ssp_task.cdb[6]) = cpu_to_be32(buffer_size);
+
+ res = sas_execute_task(task, buf, buffer_size, PCI_DMA_FROMDEVICE);
+ if (res) {
+ SAS_DPRINTK("REPORT LUNS to LUN0 failed for device %llx "
+ "with status:0x%x\n",
+ SAS_ADDR(dev->sas_addr), task->task_status.stat);
+ memcpy(task->ssp_task.LUN, RL_WLUN, 8);
+ res = sas_execute_task(task, buf, buffer_size,
+ PCI_DMA_FROMDEVICE);
+ if (res) {
+ SAS_DPRINTK("REPORT LUNS to REPORT LUNS W-LUN failed "
+ "for device %llx with status:0x%x\n",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.stat);
+ goto out_err_task;
+ }
+ dev->end_dev.rl_wlun = 1;
+ }
+
+ len = be32_to_cpu(*(__be32 *)buf);
+ if (len + 8 > buffer_size) {
+ SAS_DPRINTK("need bigger buffer for REPORT LUNS\n");
+ buffer_size = len + 8;
+ res = -ENOMEM;
+ buf = kmalloc(buffer_size, GFP_KERNEL);
+ if (!buf)
+ goto out_err_task;
+ kfree(*buffer);
+ *buffer = buf;
+ if (dev->end_dev.rl_wlun)
+ memcpy(task->ssp_task.LUN, RL_WLUN, 8);
+ else
+ memset(task->ssp_task.LUN, 0, 8);
+ res = sas_execute_task(task, buf, buffer_size,
+ PCI_DMA_FROMDEVICE);
+ if (res) {
+ SAS_DPRINTK("2nd REPORT LUNS to %s failed "
+ "for device %llx with status:0x%x\n",
+ dev->end_dev.rl_wlun ? "REPORT LUNS W-LUN"
+ : "LUN0",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.stat);
+ goto out_err_task;
+ }
+ }
+
+ *size = len+8;
+ sas_free_task(task);
+ return 0;
+
+out_err_task:
+ sas_free_task(task);
+out_err:
+ kfree(*buffer);
+ *buffer = NULL;
+ size = 0;
+ return res;
+}
+
+static int sas_get_inquiry(struct LU *lu)
+{
+ static const u8 inquiry_cmd[16] = { 0x12, };
+ struct sas_task *task;
+ int res;
+
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = lu->parent;
+ task->ssp_task.retry_count = 1;
+ memcpy(task->ssp_task.LUN, lu->LUN, 8);
+ memcpy(task->ssp_task.cdb, inquiry_cmd, 16);
+ *(__be16 *)(task->ssp_task.cdb+3) = cpu_to_be16(SAS_INQUIRY_DATA_LEN);
+
+ res = sas_execute_task(task, lu->inquiry_data, SAS_INQUIRY_DATA_LEN,
+ PCI_DMA_FROMDEVICE);
+ if (!res)
+ lu->inquiry_valid_data_len = min(SAS_INQUIRY_DATA_LEN,
+ lu->inquiry_data[4]+5);
+ sas_free_task(task);
+ return res;
+}
+
+static struct LU *sas_alloc_lu(void)
+{
+ struct LU *lu = kmalloc(sizeof(*lu), GFP_KERNEL);
+ if (lu) {
+ memset(lu, 0, sizeof(*lu));
+ INIT_LIST_HEAD(&lu->list);
+ }
+ return lu;
+}
+
+static int sas_register_lu(struct domain_device *dev, u8 *buf, int size)
+{
+ int res;
+
+ for (buf = buf+8, size -= 8; size > 0; size -= 8, buf += 8) {
+ struct LU *lu = sas_alloc_lu();
+
+ SAS_DPRINTK("%016llx probing LUN:%016llx\n",
+ SAS_ADDR(dev->sas_addr),
+ be64_to_cpu(*(__be64 *)buf));
+ if (lu) {
+ lu->parent = dev;
+ memcpy(lu->LUN, buf, 8);
+ res = sas_get_inquiry(lu);
+ if (res) {
+ SAS_DPRINTK("dev %llx LUN %016llx didn't reply"
+ " to INQUIRY, forgotten\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(lu->LUN));
+ kfree(lu);
+ continue;
+ }
+ lu->lu_obj.kset = &dev->end_dev.LU_kset;
+ kobject_set_name(&lu->lu_obj, "%016llx",
+ SAS_ADDR(lu->LUN));
+ lu->lu_obj.ktype = dev->end_dev.LU_kset.ktype;
+ memcpy(lu->LUN, buf, 8);
+ list_add_tail(&lu->list, &dev->end_dev.LU_list);
+ }
+ }
+
+ return list_empty(&dev->end_dev.LU_list) ? -ENODEV : 0;
+}
+
+/**
+ * sas_do_lu_discovery -- Discover LUs of a SCSI device
+ * @dev: pointer to a domain device of interest
+ *
+ * Discover logical units present in the SCSI device. I'd like this
+ * to be moved to SCSI Core, but SCSI Core has no concept of a "SCSI
+ * device with a SCSI Target port". A SCSI device with a SCSI Target
+ * port is a device which the _transport_ found, but other than that,
+ * the transport has little or _no_ knowledge about the device.
+ * Ideally, a LLDD would register a "SCSI device with a SCSI Target
+ * port" with SCSI Core and then SCSI Core would do LU discovery of
+ * that device.
+ *
+ * REPORT LUNS is mandatory. If a device doesn't support it,
+ * it is broken and you should return it. Nevertheless, we
+ * assume (optimistically) that the link hasn't been severed and
+ * that maybe we can get to the device anyhow.
+ */
+static int sas_do_lu_discovery(struct domain_device *dev)
+{
+ int res;
+ u8 *buffer;
+ int size;
+
+ res = sas_get_report_luns(dev, &buffer, &size);
+ if (res) {
+ SAS_DPRINTK("dev %llx didn't reply to REPORT LUNS, trying "
+ "LUN 0 anyway\n",
+ SAS_ADDR(dev->sas_addr));
+ size = 16;
+ buffer = kmalloc(size, GFP_KERNEL);
+ memset(buffer, 0, size);
+ }
+
+ res = sas_register_lu(dev, buffer, size);
+ if (res) {
+ SAS_DPRINTK("dev %llx didn't report any LUs\n",
+ SAS_ADDR(dev->sas_addr));
+ res = 0;
+ }
+
+ kfree(buffer);
+ return res;
+}
+
+/* ---------- Common/dispatchers ---------- */
+
+void sas_kobj_set(struct domain_device *dev)
+{
+ if (!dev->parent) {
+ /* device directly attached to the host adapter */
+ dev->dev_obj.kset = &dev->port->dev_kset;
+ } else {
+ /* parent is an expander */
+ dev->dev_obj.parent = &dev->parent->dev_obj;
+ dev->port = dev->parent->port;
+ }
+
+ list_add_tail(&dev->dev_list_node, &dev->port->dev_list);
+ kobject_set_name(&dev->dev_obj, "%016llx", SAS_ADDR(dev->sas_addr));
+ dev->dev_obj.ktype = dev_ktype[dev->dev_type];
+}
+
+/**
+ * sas_discover_sata -- discover an STP/SATA domain device
+ * @dev: pointer to struct domain_device of interest
+ *
+ * First we notify the LLDD of this device, so we can send frames to
+ * it. Then depending on the type of device we call the appropriate
+ * discover functions. Once device discover is done, we notify the
+ * LLDD so that it can fine-tune its parameters for the device, by
+ * removing it and then adding it. That is, the second time around,
+ * the driver would have certain fields, that it is looking at, set.
+ * Finally we initialize the kobj so that the device can be added to
+ * the system at registration time. Devices directly attached to a HA
+ * port, have no parents. All other devices do, and should have their
+ * "parent" pointer set appropriately before calling this function.
+ */
+int sas_discover_sata(struct domain_device *dev)
+{
+ int res;
+
+ sas_get_ata_command_set(dev);
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ switch (dev->dev_type) {
+ case SATA_DEV:
+ res = sas_discover_sata_dev(dev);
+ break;
+ case SATA_PM:
+ res = sas_discover_sata_pm(dev);
+ break;
+ default:
+ break;
+ }
+
+ sas_notify_lldd_dev_gone(dev);
+ if (!res) {
+ sas_notify_lldd_dev_found(dev);
+ sas_kobj_set(dev);
+ }
+ return res;
+}
+
+/**
+ * sas_discover_end_dev -- discover an end device (SSP, etc)
+ * @end: pointer to domain device of interest
+ *
+ * See comment in sas_discover_sata().
+ *
+ * Get the ITNL timeout only for domain root devices.
+ * If we couldn't get it, either the link was severed or
+ * this is a device which doesn't support MODE SENSE.
+ */
+int sas_discover_end_dev(struct domain_device *dev)
+{
+ int res;
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ res = sas_get_itnl_timeout(dev);
+ if (!res) {
+ sas_notify_lldd_dev_gone(dev);
+ sas_notify_lldd_dev_found(dev);
+ }
+
+ dev->end_dev.LU_kset.kobj.parent = &dev->dev_obj;
+ dev->end_dev.LU_kset.ktype = &lu_dev_ktype;
+
+ res = sas_do_lu_discovery(dev);
+ if (res)
+ goto out_err;
+
+ kobject_set_name(&dev->end_dev.LU_kset.kobj, "%s", "LUNS");
+
+ sas_kobj_set(dev);
+ return 0;
+
+out_err:
+ sas_notify_lldd_dev_gone(dev);
+ return res;
+}
+
+/* ---------- Device registration and unregistration ---------- */
+
+static inline void sas_unregister_common_dev(struct domain_device *dev)
+{
+ sas_notify_lldd_dev_gone(dev);
+ if (!dev->parent)
+ dev->port->port_dev = NULL;
+ else
+ list_del_init(&dev->siblings);
+ list_del_init(&dev->dev_list_node);
+ kobject_unregister(&dev->dev_obj);
+}
+
+static int sas_register_end_dev(struct domain_device *dev)
+{
+ struct LU *lu;
+
+ kobject_register(&dev->dev_obj);
+ kset_register(&dev->end_dev.LU_kset);
+
+ list_for_each_entry(lu, &dev->end_dev.LU_list, list) {
+ kobject_register(&lu->lu_obj);
+ sas_register_with_scsi(lu);
+ }
+
+ return 0;
+}
+
+static void sas_unregister_end_dev(struct domain_device *dev)
+{
+ struct LU *lu, *n;
+
+ list_for_each_entry_safe(lu, n, &dev->end_dev.LU_list, list) {
+ sas_unregister_with_scsi(lu);
+ list_del_init(&lu->list);
+ kobject_unregister(&lu->lu_obj);
+ }
+ kset_unregister(&dev->end_dev.LU_kset);
+ sas_unregister_common_dev(dev);
+}
+
+static int sas_register_sata(struct domain_device *dev)
+{
+ kobject_register(&dev->dev_obj);
+ return 0;
+}
+
+static void sas_unregister_sata(struct domain_device *dev)
+{
+ sas_unregister_common_dev(dev);
+}
+
+/**
+ * sas_register_ex_dev -- Register this expander
+ * @ex: pointer to domain device
+ *
+ * It is imperative that this is done breadth-first. Other parts of
+ * the code rely on that.
+ */
+static int sas_register_ex_dev(struct domain_device *dev)
+{
+ kobject_register(&dev->dev_obj);
+ sysfs_create_bin_file(&dev->dev_obj, &dev->ex_dev.smp_bin_attr);
+ return 0;
+}
+
+static void sas_unregister_ex_dev(struct domain_device *dev)
+{
+ BUG_ON(!list_empty(&dev->ex_dev.children));
+ sysfs_remove_bin_file(&dev->dev_obj, &dev->ex_dev.smp_bin_attr);
+ sas_unregister_common_dev(dev);
+}
+
+/**
+ * sas_register_domain_devs -- register the domain devices with sysfs
+ * @port: the port to the domain
+ *
+ * This function registers the domain devices with sysfs and with
+ * the SCSI subsystem.
+ */
+static int sas_register_domain_devs(struct sas_port *port)
+{
+ struct domain_device *dev;
+
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (dev->dev_obj.dentry)
+ continue;
+ switch (dev->dev_type) {
+ case SAS_END_DEV:
+ sas_register_end_dev(dev);
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ sas_register_ex_dev(dev);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ sas_register_sata(dev);
+ break;
+ default:
+ SAS_DPRINTK("%s: unknown device type %d\n",
+ __FUNCTION__, dev->dev_type);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+void sas_unregister_dev(struct domain_device *dev)
+{
+ switch (dev->dev_type) {
+ case SAS_END_DEV:
+ sas_unregister_end_dev(dev);
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ sas_unregister_ex_dev(dev);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ sas_unregister_sata(dev);
+ break;
+ default:
+ SAS_DPRINTK("%s: unknown device type %d\n",
+ __FUNCTION__, dev->dev_type);
+ BUG_ON(dev);
+ break;
+ }
+}
+
+static void sas_unregister_domain_devices(struct sas_port *port)
+{
+ struct domain_device *dev, *n;
+
+ list_for_each_entry_reverse_safe(dev,n,&port->dev_list,dev_list_node)
+ sas_unregister_dev(dev);
+}
+
+/* ---------- Discovery and Revalidation ---------- */
+
+/**
+ * sas_discover_domain -- discover the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+static int sas_discover_domain(struct sas_port *port)
+{
+ int error = 0;
+
+
+ if (port->port_dev)
+ return 0;
+ else {
+ error = sas_get_port_device(port);
+ if (error)
+ return error;
+ }
+
+ SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+ current->pid);
+
+ switch (port->port_dev->dev_type) {
+ case SAS_END_DEV:
+ error = sas_discover_end_dev(port->port_dev);
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ error = sas_discover_root_expander(port->port_dev);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ error = sas_discover_sata(port->port_dev);
+ break;
+ default:
+ SAS_DPRINTK("unhandled device %d\n", port->port_dev->dev_type);
+ break;
+ }
+
+ if (error) {
+ kfree(port->port_dev); /* not kobject_register-ed yet */
+ port->port_dev = NULL;
+ } else
+ sas_register_domain_devs(port);
+
+ SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+ current->pid, error);
+
+ return error;
+}
+
+static int sas_revalidate_domain(struct sas_port *port)
+{
+ int res = 0;
+
+ SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+ current->pid);
+ if (port->port_dev) {
+ res = sas_ex_revalidate_domain(port->port_dev);
+ if (!res)
+ sas_register_domain_devs(port);
+ }
+ SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+ port->id, current->pid, res);
+ return res;
+}
+
+/* ---------- Threads and events ---------- */
+
+static DECLARE_COMPLETION(disc_comp_start);
+
+static int sas_discover_thread(void *_sas_port)
+{
+ struct sas_port *port = _sas_port;
+ struct sas_ha_struct *sas_ha = port->ha;
+ struct sas_discovery *disc = &port->disc;
+
+ daemonize("sas_disc_h%dp%d", sas_ha->core.shost->host_no, port->id);
+
+ spin_lock(&disc->disc_event_lock);
+ disc->disc_thread = current;
+ complete(&disc_comp_start);
+ while (!disc->disc_thread_quit && !list_empty(&disc->disc_event_list)){
+ struct list_head *head = disc->disc_event_list.next;
+ enum discover_event disc_ev = container_of(head,
+ struct sas_event,
+ el)->event;
+ list_del_init(head);
+ spin_unlock(&disc->disc_event_lock);
+
+ switch (disc_ev) {
+ case DISCE_DISCOVER_DOMAIN:
+ sas_discover_domain(port);
+ break;
+ case DISCE_REVALIDATE_DOMAIN:
+ sas_revalidate_domain(port);
+ break;
+ case DISCE_PORT_GONE:
+ sas_unregister_domain_devices(port);
+ complete(&port->port_gone_completion);
+ break;
+ }
+ spin_lock(&disc->disc_event_lock);
+ }
+ INIT_LIST_HEAD(&disc->disc_event_list);
+ disc->disc_thread = NULL;
+ spin_unlock(&disc->disc_event_lock);
+ up(&disc->disc_sema);
+
+ return 0;
+}
+
+static int sas_create_discover_thread(struct sas_port *port)
+{
+ int i;
+
+ init_completion(&disc_comp_start);
+ i = kernel_thread(sas_discover_thread, port, 0);
+ if (i >= 0)
+ wait_for_completion(&disc_comp_start);
+
+ return i < 0 ? i : 0;
+}
+
+int sas_discover_event(struct sas_port *port, enum discover_event ev)
+{
+ int res;
+ struct sas_discovery *disc = &port->disc;
+
+ spin_lock(&disc->disc_event_lock);
+ list_move_tail(&disc->disc_events[ev].el,
+ &disc->disc_event_list);
+ if (disc->disc_thread) {
+ spin_unlock(&disc->disc_event_lock);
+ return 0;
+ }
+ down_interruptible(&disc->disc_sema);
+ disc->disc_thread_quit = 0;
+ spin_unlock(&disc->disc_event_lock);
+
+ /* The event thread (caller) is single threaded so this is safe. */
+ res = sas_create_discover_thread(port);
+ if (res) {
+ SAS_DPRINTK("sas port%d: couldn't create discovery thread!\n",
+ port->id);
+ up(&disc->disc_sema);
+ }
+ return res;
+}
+
+void sas_kill_disc_thread(struct sas_port *port)
+{
+ struct sas_discovery *disc = &port->disc;
+
+ spin_lock(&disc->disc_event_lock);
+ disc->disc_thread_quit = 1;
+ if (disc->disc_thread) {
+ wake_up_process(disc->disc_thread);
+ spin_unlock(&disc->disc_event_lock);
+ down_interruptible(&disc->disc_sema);
+ return;
+ }
+ spin_unlock(&disc->disc_event_lock);
+}
+
+/**
+ * sas_init_disc -- initialize the discovery struct in the port
+ * @port: pointer to struct port
+ *
+ * Called when the ports are being initialized.
+ */
+void sas_init_disc(struct sas_discovery *disc, struct sas_port *port)
+{
+ int i;
+
+ if (!end_dev_attrs[0]) {
+ for (i = 0; i < ARRAY_SIZE(dev_attrs)-1; i++)
+ end_dev_attrs[i] = &dev_attrs[i].attr;
+ end_dev_attrs[i] = NULL;
+ sas_init_ex_attr();
+ for (i = 0; i < ARRAY_SIZE(sata_attrs)-1; i++)
+ sata_dev_attrs[i] = &sata_attrs[i].attr;
+ sata_dev_attrs[i] = NULL;
+ for (i = 0; i < ARRAY_SIZE(lu_attrs)-1; i++)
+ lu_dev_attrs[i] = &lu_attrs[i].attr;
+ lu_dev_attrs[i] = NULL;
+ }
+
+ spin_lock_init(&disc->disc_event_lock);
+ INIT_LIST_HEAD(&disc->disc_event_list);
+ init_MUTEX(&disc->disc_sema);
+ disc->disc_thread = NULL;
+ disc->disc_thread_quit = 0;
+
+ for (i = 0; i < DISC_NUM_EVENTS; i++) {
+ struct sas_event *ev = &disc->disc_events[i];
+ ev->event = i;
+ INIT_LIST_HEAD(&ev->el);
+ }
+}
+
+void sas_unregister_devices(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ for (i = 0; i < sas_ha->num_phys; i++)
+ sas_unregister_domain_devices(sas_ha->sas_port[i]);
+}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |