RE: can't boot 2.6.13

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks, Eric.
Anyone have any ideas why my cciss based system won't boot?

mikem 

> -----Original Message-----
> From: Moore, Eric Dean [mailto:[email protected]] 
> Sent: Thursday, September 08, 2005 5:52 PM
> To: Miller, Mike (OS Dev); [email protected]; 
> [email protected]
> Cc: [email protected]; [email protected]
> Subject: RE: can't boot 2.6.13
> 
> On Thursday, September 08, 2005 3:19 PM, Mike Miller(HP) wrote:
> > I am not able to boot the 2.6.13 version of the kernel. I've tried 
> > different systems, tried downloading again, still nothing. 
> Here's the 
> > last thing I see from the serial port:
> > 
> > md: Autodetecting RAID arrays.
> > md: autorun ...
> > md: ... autorun DONE.
> > RAMDISK: Compressed image found at block 0
> > input: AT Translated Set 2 keyboard on isa0060/serio0
> > VFS: Mounted root (ext2 filesystem).
> > logips2pp: Detected unknown logitech mouse model 1
> > input: PS/2 Logitech Mouse on isa0060/serio1 SCSI subsystem 
> > initialized Fusion MPT base driver 3.03.02 Copyright (c) 
> 1999-2005 LSI 
> > Logic Corporation
> > 
> 
> We introduced split drivers for 2.6.13.  There are new layer 
> drivers that sit ontop of mptscsih.ko.  These drivers are 
> split along bus protocal, so there is mptspi.ko, mptfc.ko, 
> and mptsas.ko.  This is to tie into the scsi transport layers 
> that are split the same.
> 
> For 1030(a SPI controller)
> If your using RedHat, you need to change mptscish to mptspi 
> in /etc/modprobe.conf.
> If your using SuSE, you need to change mptscish to mptspi in 
> /etc/sysconfig/kernel
> 
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux