Re: agp_backend_initialize() failed on ServerWorks CNB20LE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 02, 2005 at 11:21:39PM +0200, Maciej Soltysiak wrote:
 > Hello,
 > 
 > On a server with ServerWorks CNB20LE and CONFIG_AGP_SWORKS enabled
 > I get these upon bootup:
 > Linux agpgart interface v0.101 (c) Dave Jones
 > agpgart: unable to determine aperture size.
 > agpgart: agp_backend_initialize() failed.
 > agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
 > agpgart: unable to determine aperture size.
 > agpgart: agp_backend_initialize() failed.
 > agpgart-serverworks: probe of 0000:00:00.1 failed with error -22

Every time I've seen this reported so far, its turned out that the board
doesn't actually have an AGP slot. Is this case here too ?

Documentation on serverworks chipsets is as good as non-existant,
so there's not a great deal we can do here.

 > The only problems I have that *may* be related to these messages is the
 > fact that when I boot into X and try to switch to a text console, the
 > screen gets garbled and freezes, the server works fine besides the
 > screen throwing trash at me.

Likely completely unrelated. agpgart is used only for accelerated 3d.

		Dave

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux