Re: [2.4.31] - USB device numbering in /proc/bus/usb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Sergey,

> Yes.  Addresses for USB devices are assigned dynamically.  If you
> disconnect the modem from USB and connect it again, its address will
> change.

The problem I've is that nothing changed on the machine except that 
I did a reboot. Nothing (USB device) added, nothing removed, so with
a stable hardware config, USB numbering should have stayed stable, IMHO.
 
> > I would have been expecting some more stability in the 
> numbering across
> > reboot, the same way IDE disks numbers are stable.
> 
> Use some other identifier which is stable - e.g., serial number of the
> USB device (unfortunately, many devices don't have it).

Well yes, I'm going to try to convert to some other identifiers space
as this seems to be the only way to go.

Thanks for the confirmation,
Regards,
Paul
 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux