Re: [PATCH,RFC] quirks for VIA VT8237 southbridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Iau, 2005-08-18 at 14:36 +0200, Karsten Wiese wrote:
> Solutions: either calculate correct new_irq (= PIN-Number & 0x0F)
>  or don't apply likely wrong value.
> 
> Following diff takes the 2nd way.
> 
> Well, VT8237 ignores the wrong new_irq in IOAPIC-Mode,
> but its irritating to see dmesg print out nonsense then. 

The docs and my poking around with a later board seem to imply you need
to set the IRQ value > 15 to get it to the IO-APIC. The data sheet
doesn't seem clear if you need to set it all up by hand or if ACPI does
it.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux