- FIX: check if the callback is set, before calling it.
- Clean up whitespace / indentation.
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
---
linux/drivers/media/dvb/frontends/lgdt330x.c | 50 +++++++++----------
1 files changed, 25 insertions(+), 25 deletions(-)
diff -u linux-2.6.13-rc6-git8/drivers/media/dvb/frontends/lgdt330x.c linux/drivers/media/dvb/frontends/lgdt330x.c
--- linux-2.6.13-rc6-git8/drivers/media/dvb/frontends/lgdt330x.c 2005-08-17 00:34:03.000000000 +0000
+++ linux/drivers/media/dvb/frontends/lgdt330x.c 2005-08-17 22:31:30.000000000 +0000
@@ -69,8 +69,8 @@
};
static int i2c_write_demod_bytes (struct lgdt330x_state* state,
- u8 *buf, /* data bytes to send */
- int len /* number of bytes to send */ )
+ u8 *buf, /* data bytes to send */
+ int len /* number of bytes to send */ )
{
struct i2c_msg msg =
{ .addr = state->config->demod_address,
@@ -129,13 +129,13 @@
};
ret = i2c_write_demod_bytes(state,
- reset, sizeof(reset));
+ reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) and unmask interrupts */
reset[1] = 0x7f;
ret = i2c_write_demod_bytes(state,
- reset, sizeof(reset));
+ reset, sizeof(reset));
}
return ret;
}
@@ -149,13 +149,13 @@
};
ret = i2c_write_demod_bytes(state,
- reset, sizeof(reset));
+ reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) */
reset[1] = 0x01;
ret = i2c_write_demod_bytes(state,
- reset, sizeof(reset));
+ reset, sizeof(reset));
}
return ret;
}
@@ -172,7 +172,6 @@
}
}
-
static int lgdt330x_init(struct dvb_frontend* fe)
{
/* Hardware reset is done using gpio[0] of cx23880x chip.
@@ -229,13 +228,13 @@
case LGDT3302:
chip_name = "LGDT3302";
err = i2c_write_demod_bytes(state, lgdt3302_init_data,
- sizeof(lgdt3302_init_data));
- break;
+ sizeof(lgdt3302_init_data));
+ break;
case LGDT3303:
chip_name = "LGDT3303";
err = i2c_write_demod_bytes(state, lgdt3303_init_data,
- sizeof(lgdt3303_init_data));
- break;
+ sizeof(lgdt3303_init_data));
+ break;
default:
chip_name = "undefined";
printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n");
@@ -262,15 +261,15 @@
switch (state->config->demod_chip) {
case LGDT3302:
err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
- buf, sizeof(buf));
- break;
+ buf, sizeof(buf));
+ break;
case LGDT3303:
err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
- buf, sizeof(buf));
- break;
+ buf, sizeof(buf));
+ break;
default:
printk(KERN_WARNING
- "Only LGDT3302 and LGDT3303 are supported chips.\n");
+ "Only LGDT3302 and LGDT3303 are supported chips.\n");
err = -ENODEV;
}
@@ -330,7 +329,7 @@
if (state->config->demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data,
- sizeof(lgdt3303_8vsb_44_data));
+ sizeof(lgdt3303_8vsb_44_data));
}
break;
@@ -378,18 +377,19 @@
/* Select the requested mode */
i2c_write_demod_bytes(state, top_ctrl_cfg,
- sizeof(top_ctrl_cfg));
- state->config->set_ts_params(fe, 0);
+ sizeof(top_ctrl_cfg));
+ if (state->config->set_ts_params)
+ state->config->set_ts_params(fe, 0);
state->current_modulation = param->u.vsb.modulation;
}
- /* Change only if we are actually changing the channel */
- if (state->current_frequency != param->frequency) {
- /* Tune to the new frequency */
+ /* Tune to the specified frequency */
+ if (state->config->pll_set)
state->config->pll_set(fe, param);
- /* Keep track of the new frequency */
- state->current_frequency = param->frequency;
- }
+
+ /* Keep track of the new frequency */
+ state->current_frequency = param->frequency;
+
lgdt330x_SwReset(state);
return 0;
}
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |