This is the second of two patches, it implements the setprlimit()
syscall.
Implementation: This patch provides a new syscall setprlimit() for
writing a given process resource limits for i386. Its implementation
follows closely the setrlimit syscall. It is given a pid as an
additional argument. If the given pid equals zero the current process
rlimits are written and the behaviour resembles the behaviour of
setrlimit. Otherwise some checking on the validity of the given pid is
done and if the given process is found access is granted if
- the calling process holds the CAP_SYS_RESOURCE capability or
- the calling process uid equals the uid, euid, suid of the target
process and the calling process gid equals the gid, egid, sgid of
the target process.
(This resembles the behaviour of the ptrace system call.)
Simple programs for testing the syscalls can be found on
http://stud4.tuwien.ac.at/~e8607062/studies/soc/patches/
Signed-off-by: Wieland Gmeiner <[email protected]>
diff -uprN -X linux-2.6.13-rc6-vanilla/Documentation/dontdiff linux-2.6.13-rc6-getprlimit/arch/i386/kernel/syscall_table.S linux-2.6.13-rc6-setprlimit/arch/i386/kernel/syscall_table.S
--- linux-2.6.13-rc6-getprlimit/arch/i386/kernel/syscall_table.S 2005-08-17 03:20:30.000000000 +0200
+++ linux-2.6.13-rc6-setprlimit/arch/i386/kernel/syscall_table.S 2005-08-18 01:28:13.000000000 +0200
@@ -295,3 +295,4 @@ ENTRY(sys_call_table)
.long sys_inotify_add_watch
.long sys_inotify_rm_watch
.long sys_getprlimit
+ .long sys_setprlimit /* 295 */
diff -uprN -X linux-2.6.13-rc6-vanilla/Documentation/dontdiff linux-2.6.13-rc6-getprlimit/include/asm-i386/unistd.h linux-2.6.13-rc6-setprlimit/include/asm-i386/unistd.h
--- linux-2.6.13-rc6-getprlimit/include/asm-i386/unistd.h 2005-08-17 03:20:29.000000000 +0200
+++ linux-2.6.13-rc6-setprlimit/include/asm-i386/unistd.h 2005-08-18 01:28:12.000000000 +0200
@@ -300,8 +300,9 @@
#define __NR_inotify_add_watch 292
#define __NR_inotify_rm_watch 293
#define __NR_getprlimit 294
+#define __NR_setprlimit 295
-#define NR_syscalls 295
+#define NR_syscalls 296
/*
* user-visible error numbers are in the range -1 - -128: see
diff -uprN -X linux-2.6.13-rc6-vanilla/Documentation/dontdiff linux-2.6.13-rc6-getprlimit/include/linux/security.h linux-2.6.13-rc6-setprlimit/include/linux/security.h
--- linux-2.6.13-rc6-getprlimit/include/linux/security.h 2005-08-17 03:11:32.000000000 +0200
+++ linux-2.6.13-rc6-setprlimit/include/linux/security.h 2005-08-18 01:28:05.000000000 +0200
@@ -591,6 +591,15 @@ struct swap_info_struct;
* @resource contains the resource whose limit is being set.
* @new_rlim contains the new limits for @resource.
* Return 0 if permission is granted.
+ * @task_setprlimit:
+ * Check permission before setting the resource limits of process @p
+ * for @resource to @new_rlim. The old resource limit values can
+ * be examined by dereferencing (p->signal->rlim + resource).
+ * @p contains the task struct of the process whose resource limit is
+ * being set.
+ * @resource contains the resource whose limit is being set.
+ * @new_rlim contains the new limits for @resource.
+ * Return 0 if permission is granted.
* @task_setscheduler:
* Check permission before setting scheduling policy and/or parameters of
* process @p based on @policy and @lp.
@@ -1157,6 +1166,8 @@ struct security_operations {
int (*task_setgroups) (struct group_info *group_info);
int (*task_setnice) (struct task_struct * p, int nice);
int (*task_setrlimit) (unsigned int resource, struct rlimit * new_rlim);
+ int (*task_setprlimit) (struct task_struct * p, unsigned int resource,
+ struct rlimit * new_rlim);
int (*task_setscheduler) (struct task_struct * p, int policy,
struct sched_param * lp);
int (*task_getscheduler) (struct task_struct * p);
@@ -1804,6 +1815,13 @@ static inline int security_task_setrlimi
return security_ops->task_setrlimit (resource, new_rlim);
}
+static inline int security_task_setprlimit (struct task_struct *p,
+ unsigned int resource,
+ struct rlimit *new_rlim)
+{
+ return security_ops->task_setprlimit (p, resource, new_rlim);
+}
+
static inline int security_task_setscheduler (struct task_struct *p,
int policy,
struct sched_param *lp)
diff -uprN -X linux-2.6.13-rc6-vanilla/Documentation/dontdiff linux-2.6.13-rc6-getprlimit/kernel/sys.c linux-2.6.13-rc6-setprlimit/kernel/sys.c
--- linux-2.6.13-rc6-getprlimit/kernel/sys.c 2005-08-17 23:56:40.000000000 +0200
+++ linux-2.6.13-rc6-setprlimit/kernel/sys.c 2005-08-18 01:44:25.000000000 +0200
@@ -1561,6 +1561,27 @@ asmlinkage long sys_old_getrlimit(unsign
#endif
+static inline void check_process_timer(struct task_struct *task,
+ unsigned int resource,
+ struct rlimit *new_rlim,
+ int holds_lock)
+{
+ if (resource == RLIMIT_CPU && new_rlim->rlim_cur != RLIM_INFINITY &&
+ (cputime_eq(task->signal->it_prof_expires, cputime_zero) ||
+ new_rlim->rlim_cur <= cputime_to_secs(
+ task->signal->it_prof_expires))) {
+ cputime_t cputime = secs_to_cputime(new_rlim->rlim_cur);
+ if (!holds_lock)
+ read_lock(&tasklist_lock);
+ spin_lock_irq(&task->sighand->siglock);
+ set_process_cpu_timer(task, CPUCLOCK_PROF,
+ &cputime, NULL);
+ spin_unlock_irq(&task->sighand->siglock);
+ if (!holds_lock)
+ read_unlock(&tasklist_lock);
+ }
+}
+
asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
{
struct rlimit new_rlim, *old_rlim;
@@ -1570,8 +1591,8 @@ asmlinkage long sys_setrlimit(unsigned i
return -EINVAL;
if(copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
return -EFAULT;
- if (new_rlim.rlim_cur > new_rlim.rlim_max)
- return -EINVAL;
+ if (new_rlim.rlim_cur > new_rlim.rlim_max)
+ return -EINVAL;
old_rlim = current->signal->rlim + resource;
if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
!capable(CAP_SYS_RESOURCE))
@@ -1587,18 +1608,7 @@ asmlinkage long sys_setrlimit(unsigned i
*old_rlim = new_rlim;
task_unlock(current->group_leader);
- if (resource == RLIMIT_CPU && new_rlim.rlim_cur != RLIM_INFINITY &&
- (cputime_eq(current->signal->it_prof_expires, cputime_zero) ||
- new_rlim.rlim_cur <= cputime_to_secs(
- current->signal->it_prof_expires))) {
- cputime_t cputime = secs_to_cputime(new_rlim.rlim_cur);
- read_lock(&tasklist_lock);
- spin_lock_irq(¤t->sighand->siglock);
- set_process_cpu_timer(current, CPUCLOCK_PROF,
- &cputime, NULL);
- spin_unlock_irq(¤t->sighand->siglock);
- read_unlock(&tasklist_lock);
- }
+ check_process_timer(current, resource, &new_rlim, 0);
return 0;
}
@@ -1660,6 +1670,62 @@ out_nounlock:
return retval;
}
+asmlinkage long sys_setprlimit(pid_t pid, unsigned int resource,
+ struct rlimit __user *rlim)
+{
+ struct rlimit new_rlim, *old_rlim;
+ int retval;
+ task_t *p;
+
+ if (resource >= RLIM_NLIMITS)
+ return -EINVAL;
+ if (pid < 0)
+ return -EINVAL;
+ if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
+ return -EFAULT;
+ if (new_rlim.rlim_cur > new_rlim.rlim_max)
+ return -EINVAL;
+
+ retval = -ESRCH;
+ if (pid == 0) {
+ p = current;
+ } else {
+ read_lock(&tasklist_lock);
+ p = find_task_by_pid(pid);
+ }
+ if (p) {
+ retval = -EPERM;
+ if (!prlim_check_perm(p))
+ goto out_unlock;
+
+ old_rlim = p->signal->rlim + resource;
+ if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
+ !capable(CAP_SYS_RESOURCE))
+ goto out_unlock;
+ if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > NR_OPEN)
+ goto out_unlock;
+
+ retval = security_task_setprlimit(p, resource, &new_rlim);
+ if (retval)
+ goto out_unlock;
+
+ task_lock(p->group_leader);
+ *old_rlim = new_rlim;
+ task_unlock(p->group_leader);
+ retval = 0;
+
+ check_process_timer(p, resource, &new_rlim, 1);
+ }
+ if (pid == 0)
+ goto out_nounlock;
+
+out_unlock:
+ read_unlock(&tasklist_lock);
+
+out_nounlock:
+ return retval;
+}
+
/*
* It would make sense to put struct rusage in the task_struct,
* except that would make the task_struct be *really big*. After
diff -uprN -X linux-2.6.13-rc6-vanilla/Documentation/dontdiff linux-2.6.13-rc6-getprlimit/security/dummy.c linux-2.6.13-rc6-setprlimit/security/dummy.c
--- linux-2.6.13-rc6-getprlimit/security/dummy.c 2005-08-17 03:11:33.000000000 +0200
+++ linux-2.6.13-rc6-setprlimit/security/dummy.c 2005-08-18 01:28:06.000000000 +0200
@@ -548,6 +548,12 @@ static int dummy_task_setrlimit (unsigne
return 0;
}
+static int dummy_task_setprlimit (struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
+{
+ return 0;
+}
+
static int dummy_task_setscheduler (struct task_struct *p, int policy,
struct sched_param *lp)
{
@@ -937,6 +943,7 @@ void security_fixup_ops (struct security
set_to_dummy_if_null(ops, task_setgroups);
set_to_dummy_if_null(ops, task_setnice);
set_to_dummy_if_null(ops, task_setrlimit);
+ set_to_dummy_if_null(ops, task_setprlimit);
set_to_dummy_if_null(ops, task_setscheduler);
set_to_dummy_if_null(ops, task_getscheduler);
set_to_dummy_if_null(ops, task_wait);
diff -uprN -X linux-2.6.13-rc6-vanilla/Documentation/dontdiff linux-2.6.13-rc6-getprlimit/security/selinux/hooks.c linux-2.6.13-rc6-setprlimit/security/selinux/hooks.c
--- linux-2.6.13-rc6-getprlimit/security/selinux/hooks.c 2005-08-17 03:11:33.000000000 +0200
+++ linux-2.6.13-rc6-setprlimit/security/selinux/hooks.c 2005-08-18 01:28:11.000000000 +0200
@@ -2703,12 +2703,16 @@ static int selinux_task_setnice(struct t
return task_has_perm(current,p, PROCESS__SETSCHED);
}
-static int selinux_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+static inline int check_rlim_perm(struct task_struct *task, unsigned int resource,
+ struct rlimit *new_rlim)
{
- struct rlimit *old_rlim = current->signal->rlim + resource;
+ struct rlimit *old_rlim = task->signal->rlim + resource;
int rc;
- rc = secondary_ops->task_setrlimit(resource, new_rlim);
+ if (task == current)
+ rc = secondary_ops->task_setrlimit(resource, new_rlim);
+ else
+ rc = secondary_ops->task_setprlimit(task, resource, new_rlim);
if (rc)
return rc;
@@ -2717,11 +2721,22 @@ static int selinux_task_setrlimit(unsign
later be used as a safe reset point for the soft limit
upon context transitions. See selinux_bprm_apply_creds. */
if (old_rlim->rlim_max != new_rlim->rlim_max)
- return task_has_perm(current, current, PROCESS__SETRLIMIT);
+ return task_has_perm(current, task, PROCESS__SETRLIMIT);
return 0;
}
+static int selinux_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+{
+ return check_rlim_perm(current, resource, new_rlim);
+}
+
+static int selinux_task_setprlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
+{
+ return check_rlim_perm(p, resource, new_rlim);
+}
+
static int selinux_task_setscheduler(struct task_struct *p, int policy, struct sched_param *lp)
{
return task_has_perm(current, p, PROCESS__SETSCHED);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|