Re: rc6 keeps hanging and blanking displays where rc4-mm1 works fine.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/15/05, Bartlomiej Zolnierkiewicz <[email protected]> wrote:
> On 8/12/05, Alan Cox <[email protected]> wrote:
> > On Gwe, 2005-08-12 at 12:01 +0200, Helge Hafting wrote:
> > > solveable by resizing.  But the machine will occationally hang, forcing
> > > me to
> > > use the reset button.  I lost my mbox file to this (from an ext3 fs, on
> > > raid-1 on scsi.)
> >
> > Unless you are using data=journal and have turned write cache off on
> > your IDE drives that is expected. Metadata journalling protects your
> > file system intgerity. Data journalling is more expensive but will
> > protect your file integrity if the disk layer is also correctly set up.
> > Unfortunately the IDE layer defaults the wrong way and despite many
> > complaints has not been changed. In later 2.6 with modern drives you can
> 
> Changing defaults is not that easy, disabling write-cache shortens HDD
> life considerably (discussed on LKML).
> 
> Recommend solution is to disable write-cache w/ hdparm or use barrier mode.
> 
> > also enable barrier mode on the IDE layer which gives better results
> > than turning off the write cache.

Moreover Helge is using RAID-1 on SCSI so IDE is out of picture here.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux