[RFC][PATCH - 6/13] NTP cleanup: Clean up ntp_adjtimex() arguement checking

[john stultz <johnstul@us.ibm.com>]

All
	Currently ntp_adjtimex() checks the validity of a few arguments values
then takes the xtime_lock then checks the validity of more arguements
while it parses them. This separates the logic so we check the validity
of all arguements before aquiring the xtime lock. This greatly improves
the readability of the code.

Any comments or feedback would be greatly appreciated.

thanks
-john


linux-2.6.13-rc6_timeofday-ntp-part6_B5.patch
============================================
diff --git a/kernel/ntp.c b/kernel/ntp.c
--- a/kernel/ntp.c
+++ b/kernel/ntp.c
@@ -264,21 +264,44 @@ int ntp_adjtimex(struct timex *txc)
 
 	/* Now we validate the data before disabling interrupts */
 
-	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
-		/* singleshot must not be used with any other mode bits */
-		if (txc->modes != ADJ_OFFSET_SINGLESHOT)
-			return -EINVAL;
-
-	if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
-		/* adjustment Offset limited to +- .512 seconds */
-		if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
-			return -EINVAL;
-
-	/* if the quartz is off by more than 10% something is VERY wrong ! */
-	if (txc->modes & ADJ_TICK)
-		if (txc->tick <  900000/USER_HZ ||
-				txc->tick > 1100000/USER_HZ)
-			return -EINVAL;
+	/* frequency adjustment limited to +/- MAXFREQ */
+	if ((txc->modes & ADJ_FREQUENCY)
+			&& (abs(txc->freq) > MAXFREQ))
+		return -EINVAL;
+
+	/* maxerror adjustment limited to NTP_PHASE_LIMIT */
+	if ((txc->modes & ADJ_MAXERROR)
+			&& (txc->maxerror < 0
+				|| txc->maxerror >= NTP_PHASE_LIMIT))
+		return -EINVAL;
+
+	/* esterror adjustment limited to NTP_PHASE_LIMIT */
+	if ((txc->modes & ADJ_ESTERROR)
+			&& (txc->esterror < 0
+				|| txc->esterror >= NTP_PHASE_LIMIT))
+		return -EINVAL;
+
+	/* constant adjustment must be positive */
+	if ((txc->modes & ADJ_TIMECONST)
+			&& (txc->constant < 0)) /* NTP v4 uses values > 6 */
+		return -EINVAL;
+
+	/* Single shot mode can only be used by itself */
+	if (((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
+			&& (txc->modes != ADJ_OFFSET_SINGLESHOT))
+		return -EINVAL;
+
+	/* offset adjustment limited to +/- MAXPHASE */
+	if ((txc->modes != ADJ_OFFSET_SINGLESHOT)
+			&& (txc->modes & ADJ_OFFSET)
+			&& (abs(txc->offset)>= MAXPHASE))
+		return -EINVAL;
+
+	/* tick adjustment limited to 10% */
+	if ((txc->modes & ADJ_TICK)
+			&& ((txc->tick < 900000/USER_HZ)
+				||(txc->tick > 11000000/USER_HZ)))
+		return -EINVAL;
 
 	write_seqlock_irq(&xtime_lock);
 	result = time_state;       /* mostly `TIME_OK' */
@@ -287,65 +310,42 @@ int ntp_adjtimex(struct timex *txc)
 	save_adjust = time_next_adjust ? time_next_adjust : time_adjust;
 
 	/* If there are input parameters, then process them */
-	if (txc->modes)	{
-		if (txc->modes & ADJ_STATUS)	/* only set allowed bits */
-			time_status =  (txc->status & ~STA_RONLY) |
-					(time_status & STA_RONLY);
-
-		if (txc->modes & ADJ_FREQUENCY) {	/* p. 22 */
-			if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
-				result = -EINVAL;
-				goto leave;
-			}
-			time_freq = txc->freq;
-		}
-
-		if (txc->modes & ADJ_MAXERROR) {
-			if (txc->maxerror < 0
-					|| txc->maxerror >= NTP_PHASE_LIMIT) {
-				result = -EINVAL;
-				goto leave;
-			}
-			time_maxerror = txc->maxerror;
-		}
-
-		if (txc->modes & ADJ_ESTERROR) {
-			if (txc->esterror < 0
-					|| txc->esterror >= NTP_PHASE_LIMIT) {
-				result = -EINVAL;
-				goto leave;
-			}
-			time_esterror = txc->esterror;
-		}
 
-		if (txc->modes & ADJ_TIMECONST) {	/* p. 24 */
-			if (txc->constant < 0) { /* NTP v4 uses values > 6 */
-				result = -EINVAL;
-				goto leave;
-			}
-			time_constant = txc->constant;
-		}
+	if (txc->modes & ADJ_STATUS)	/* only set allowed bits */
+		time_status = (txc->status & ~STA_RONLY) |
+				(time_status & STA_RONLY);
+
+	if (txc->modes & ADJ_FREQUENCY)
+		time_freq = txc->freq;
+
+	if (txc->modes & ADJ_MAXERROR)
+		time_maxerror = txc->maxerror;
+
+	if (txc->modes & ADJ_ESTERROR)
+		time_esterror = txc->esterror;
+
+	if (txc->modes & ADJ_TIMECONST)
+		time_constant = txc->constant;
+
+	if (txc->modes & ADJ_OFFSET) {
+		if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
+			/* adjtime() is independent from ntp_adjtime() */
+			if ((time_next_adjust = txc->offset) == 0)
+				time_adjust = 0;
+		} else if (ntp_hardupdate(txc->offset, xtime))
+			result = TIME_ERROR;
+	}
 
-		if (txc->modes & ADJ_OFFSET) { /* values checked earlier */
-			if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
-				/* adjtime() is independent from ntp_adjtime() */
-				if ((time_next_adjust = txc->offset) == 0)
-					time_adjust = 0;
-				else if (ntp_hardupdate(txc->offset, xtime))
-					result = TIME_ERROR;
-			}
-		} /* txc->modes & ADJ_OFFSET */
-
-		if (txc->modes & ADJ_TICK) {
-			tick_usec = txc->tick;
-			tick_nsec = TICK_USEC_TO_NSEC(tick_usec);
-		}
-	} /* txc->modes */
-leave:
+	if (txc->modes & ADJ_TICK) {
+		tick_usec = txc->tick;
+		tick_nsec = TICK_USEC_TO_NSEC(tick_usec);
+	}
 
 	if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
 		result = TIME_ERROR;
 
+	/* write kernel state to user timex values*/
+
 	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
 		txc->offset = save_adjust;
 	else {


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/