Re: [patch 2.6.13-rc3] sis190 driver

[Francois Romieu <romieu@fr.zoreil.com>]

Pascal CHAPPERON <pascal.chapperon@wanadoo.fr> :
[...]
> sis190-120 compiles, loads but does not work (sis190_init_phy() function).
> 
> # service network start
> Bringing up loopback interface:                            [  OK  ]
> Bringing up interface eth0:
> Determining IP information for eth0... failed; no link present.  Check cable?
>                                                            [FAILED]

Thanks, your report/dmesg are welcome.

Lars noticed that the link status is not correctly reported and suggested
a few changes. Can you check if the version below works better ?

Single file patch:
http://www.zoreil.com/~romieu/sis190/20050730-2.6.13-rc4-sis190-test.patch

Patch-kit:
http://www.zoreil.com/~romieu/sis190/20050730-2.6.13-rc4/patches

Tarball:
http://www.zoreil.com/~romieu/sis190/20050730-2.6.13-rc4.tar.bz2

If it does not pass the network init, can you issue
- ifconfig eth0 blah, blah by hand
- mii-tool -vvv eth0

I'll send the whole serie of patches to netdev/akpm.

Jeff, do you want that I publish it in some git repo as well ?

--
Ueimor
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/