Re: often ide errors on amd64 / A8N-SLI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 21, 2005 at 08:30:13PM +0100, Alan Cox wrote:
> There was corruption on the cable between the controller and drive. That
> usually indicates a cable or noise problem in the PC but could indicate
> mistuning of the interface. Make sure the IDE cable is 
> 
> 
>  [controller]<---- long section ----->[slave]--short section-->[master]
> 
> 
> as one common cause is having the cable the other way around.

Another common cause is to have the master and slave swapped. The
master should be at the end of the cable.


Erik

-- 
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux