Re: often ide errors on amd64 / A8N-SLI

[jurriaan <thunder7@xs4all.nl>]

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, Jul 21, 2005 at 08:30:13PM +0100
> On Iau, 2005-07-21 at 19:26 +0200, jurriaan wrote:
> > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> 
> There was corruption on the cable between the controller and drive. That
> usually indicates a cable or noise problem in the PC but could indicate
> mistuning of the interface. Make sure the IDE cable is 
> 
>  [controller]<---- long section ----->[slave]--short section-->[master]
> 
> as one common cause is having the cable the other way around.
  
The cable happens to run the correct way, but you've given me a valuable
hint. I was wondering why hda had errors and hdc (which is the same
drive on the second port of the controller) didn't. Perhaps I'll try
another cable.

Thanks,
Jurriaan
-- 
IF MICROSOFT BUILT CARS......
You could only have one person in the car at a time, unless you
bought "Car95" or "CarNT". But, then you would have to buy more
seats.
Debian (Unstable) GNU/Linux 2.6.13-rc3-mm1 5149 bogomips load 1.94
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/