On Tue, Jul 05, 2005 at 03:02:26PM -0500, [email protected] wrote:
[Sorry for the late answer]
> Hayes, Stuart wrote:
> >> So, if I understand correctly what's going on in x86_64, your fix
> >> wouldn't be applicable to i386. In x86_64, every large page has a
> >> correct "ref_prot" that is the normal setting for that page... but in
> >> i386, the kernel text area does not--it should ideally be split into
> >> small pages all the time if there are both kernel code & free pages
> >> residing in the same 2M area.
> >>
> >> Stuart
> >
> > (This isn't a submission--I'm just posting this for comments.)
> >
> > Right now, any large page that touches anywhere from PAGE_OFFSET to
> > __init_end is initially set up as a large, executable page... but
> > some of this area contains data & free pages. The patch below adds a
> > "cleanup_nx_in_kerneltext()" function, called at the end of
> > free_initmem(), which changes these pages--except for the range from
> > "_text" to "_etext"--to PAGE_KERNEL (i.e., non-executable).
> >
> > This does result in two large pages being split up into small PTEs
> > permanently, but all the non-code regions will be non-executable, and
> > change_page_attr() will work correctly.
> >
> > What do you think of this? I have tested this on 2.6.12.
> >
> > (I've attached the patch as a file, too, since my mail server can't
> > be convinced to not wrap text.)
> >
> > Stuart
> >
>
> Andi--
>
> I made another pass at this. This does roughly the same thing, but it
> doesn't create the new "change_page_attr_perm()" functions. With this
> patch, the change to init.c (cleanup_nx_in_kerneltext()) is optional. I
> changed __change_page_attr() so that, if the page to be changed is part
> of a large executable page, it splits the page up *keeping the
> executability of the extra 511 pages*, and then marks the new PTE page
> as reserved so that it won't be reverted.
>
> So, basically, without the changes to init.c, the NX bits for data in
> the first two big pages won't get fixed until someone calls
> change_page_attr() on them. If NX is disabled, these patches have no
> functional effect at all.
>
> How does this look?
If anything you would need to ask Ingo who did the i386 NX code (cc'ed)
I personally wouldn't like doing this NX cleanup very late like you did
but instead directly after the early NX setup.
> Thanks!
> Stuart
>
> -----
>
> diff -purN linux-2.6.12grep/arch/i386/mm/init.c
> linux-2.6.12/arch/i386/mm/init.c
> --- linux-2.6.12grep/arch/i386/mm/init.c 2005-07-01
> 15:09:27.000000000 -0500
> +++ linux-2.6.12/arch/i386/mm/init.c 2005-07-05 14:32:57.000000000
> -0500
> @@ -666,6 +666,28 @@ static int noinline do_test_wp_bit(void)
> return flag;
> }
>
> +/*
> + * In kernel_physical_mapping_init(), any big pages that contained
> kernel text area were
> + * set up as big executable pages. This function should be called when
> the initmem
> + * is freed, to correctly set up the executable & non-executable pages
> in this area.
> + */
> +static void cleanup_nx_in_kerneltext(void)
> +{
> + unsigned long from, to;
> +
> + if (!nx_enabled) return;
> +
> + from = PAGE_OFFSET;
> + to = (unsigned long)_text & PAGE_MASK;
> + for (; from<to; from += PAGE_SIZE)
> + change_page_attr(virt_to_page(from), 1, PAGE_KERNEL);
> +
> + from = ((unsigned long)_etext + PAGE_SIZE - 1) & PAGE_MASK;
> + to = ((unsigned long)__init_end + LARGE_PAGE_SIZE) &
> LARGE_PAGE_MASK;
> + for (; from<to; from += PAGE_SIZE)
> + change_page_attr(virt_to_page(from), 1, PAGE_KERNEL);
> +}
> +
> void free_initmem(void)
> {
> unsigned long addr;
> @@ -679,6 +701,8 @@ void free_initmem(void)
> totalram_pages++;
> }
> printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n",
> (__init_end - __init_begin) >> 10);
> +
> + cleanup_nx_in_kerneltext();
> }
>
> #ifdef CONFIG_BLK_DEV_INITRD
> diff -purN linux-2.6.12grep/arch/i386/mm/pageattr.c
> linux-2.6.12/arch/i386/mm/pageattr.c
> --- linux-2.6.12grep/arch/i386/mm/pageattr.c 2005-07-01
> 15:09:08.000000000 -0500
> +++ linux-2.6.12/arch/i386/mm/pageattr.c 2005-07-05
> 14:44:53.000000000 -0500
> @@ -35,7 +35,8 @@ pte_t *lookup_address(unsigned long addr
> return pte_offset_kernel(pmd, address);
> }
>
> -static struct page *split_large_page(unsigned long address, pgprot_t
> prot)
> +static struct page *split_large_page(unsigned long address, pgprot_t
> prot,
> + pgprot_t ref_prot)
> {
> int i;
> unsigned long addr;
> @@ -53,7 +54,7 @@ static struct page *split_large_page(uns
> pbase = (pte_t *)page_address(base);
> for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) {
> pbase[i] = pfn_pte(addr >> PAGE_SHIFT,
> - addr == address ? prot :
> PAGE_KERNEL);
> + addr == address ? prot : ref_prot);
> }
> return base;
> }
> @@ -118,11 +119,30 @@ __change_page_attr(struct page *page, pg
> if (!kpte)
> return -EINVAL;
> kpte_page = virt_to_page(kpte);
> +
> + /*
> + * If this page is part of a large page that's executable (and
> NX is
> + * enabled), then split page up and set new PTE page as reserved
> so
> + * we won't revert this back into a large page. This should
> only
> + * happen in large pages that also contain kernel executable
> code,
> + * and shouldn't happen at all if init.c correctly sets up NX
> regions.
> + */
> + if (nx_enabled &&
> + !(pte_val(*kpte) & _PAGE_NX) &&
> + (pte_val(*kpte) & _PAGE_PSE)) {
> + struct page *split = split_large_page(address, prot,
> PAGE_KERNEL_EXEC);
> + if (!split)
> + return -ENOMEM;
> + set_pmd_pte(kpte,address,mk_pte(split,
> PAGE_KERNEL_EXEC));
> + SetPageReserved(split);
Why setting reserved? I don't think cpa checks that anywhere.
In fact Nick has been working on getting rid of Reserved completely.
Anyways, isn't the code from x86-64 for this enough? It should
work here too. I don't think such a ugly special case is needed.
-Andi
> + return 0;
> + }
> +
> if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL)) {
> if ((pte_val(*kpte) & _PAGE_PSE) == 0) {
> set_pte_atomic(kpte, mk_pte(page, prot));
> } else {
> - struct page *split = split_large_page(address,
> prot);
> + struct page *split = split_large_page(address,
> prot, PAGE_KERNEL);
> if (!split)
> return -ENOMEM;
> set_pmd_pte(kpte,address,mk_pte(split,
> PAGE_KERNEL));
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|