Re: aic7xxx regression occuring after 2.6.12 final

[Tony Vroon <chainsaw@gentoo.org>]

On Sat, 2005-07-02 at 14:46 -0500, James Bottomley wrote:
> This should, therefore, get the whole lot booting again.
Confirmed. Thumbs up :)

For good measure, here is the relevant bit of dmesg output:
CPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level,
high) -> IRQ 17
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 29160 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

 target0:0:0: asynchronous.
  Vendor: FUJITSU   Model: MAP3367NP         Rev: 0106
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
 target0:0:0: Beginning Domain Validation
 target0:0:0: wide asynchronous.
 target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s ST (12.5 ns, offset 127)
 target0:0:0: Ending Domain Validation
(scsi0:A:1:0): refuses WIDE negotiation.  Using 8bit transfers
 target0:0:1: asynchronous.
  Vendor: YAMAHA    Model: CRW2100S          Rev: 1.0N
  Type:   CD-ROM                             ANSI SCSI revision: 02
 target0:0:1: Beginning Domain Validation
 target0:0:1: Domain Validation skipping write tests
 target0:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 7)
 target0:0:1: Ending Domain Validation
(scsi0:A:2:0): refuses WIDE negotiation.  Using 8bit transfers
 target0:0:2: asynchronous.
  Vendor: PIONEER   Model: DVD-ROM DVD-305   Rev: 1.03
  Type:   CD-ROM                             ANSI SCSI revision: 02
 target0:0:2: Beginning Domain Validation
 target0:0:2: Domain Validation skipping write tests
 target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
 target0:0:2: Ending Domain Validation
target0:0:3: asynchronous.
  Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 1.11
  Type:   CD-ROM                             ANSI SCSI revision: 02
 target0:0:3: Beginning Domain Validation
 target0:0:3: Domain Validation skipping write tests
 target0:0:3: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
 target0:0:3: Ending Domain Validation
 target0:0:5: asynchronous.
  Vendor: QUANTUM   Model: ATLAS10K3_36_SCA  Rev: 020W
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:5:0: Tagged Queuing enabled.  Depth 32
 target0:0:5: Beginning Domain Validation
 target0:0:5: wide asynchronous.
 target0:0:5: FAST-80 WIDE SCSI 160.0 MB/s ST (12.5 ns, offset 127)
 target0:0:5: Ending Domain Validation
scsi0:A:6:0: Tagged Queuing enabled.  Depth 32
 target0:0:6: Beginning Domain Validation
 target0:0:6: wide asynchronous.
 target0:0:6: FAST-80 WIDE SCSI 160.0 MB/s ST (12.5 ns, offset 63)
 target0:0:6: Ending Domain Validation
SCSI device sda: 71775284 512-byte hdwr sectors (36749 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 71775284 512-byte hdwr sectors (36749 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71833096 512-byte hdwr sectors (36779 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 71833096 512-byte hdwr sectors (36779 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 5, lun 0
ttached scsi disk sdb at scsi0, channel 0, id 5, lun 0
SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1
Attached scsi disk sdc at scsi0, channel 0, id 6, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
sr1: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0
sr2: scsi-1 drive
Attached scsi CD-ROM sr2 at scsi0, channel 0, id 3, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 5
Attached scsi generic sg2 at scsi0, channel 0, id 2, lun 0,  type 5
Attached scsi generic sg3 at scsi0, channel 0, id 3, lun 0,  type 5
Attached scsi generic sg4 at scsi0, channel 0, id 5, lun 0,  type 0
Attached scsi generic sg5 at scsi0, channel 0, id 6, lun 0,  type 0

Attachment: signature.asc
Description: This is a digitally signed message part