On Tuesday 07 June 2005 23:58, Adam Morley wrote:
> On 6/7/05, Dmitry Torokhov <[email protected]> wrote:
> > On Monday 06 June 2005 02:28, Adam Morley wrote:
> > > Hi Dimitry,
> > >
> > > On 6/5/05, Dmitry Torokhov <[email protected]> wrote:
> > > > On Sunday 05 June 2005 21:24, Adam Morley wrote:
> > > > > When I do a mem suspend (echo mem > /sys/power/state), either through
> > > > > a lid switch ACPI action, or manually echo'ing the parameter, the
> > > > > mouse doesn't work after un-suspending. It seems like it is no longer
> > > > > detected/initialized. cat'ing the device file doesn't produce output,
> > > > > and gpm and X don't get mouse inputs.
> > > >
> > > > Could you please try booting 2.6.12-rc5 with "i8042.debug" on the kernel
> > > > command line; suspend, resume and post your dmesg?
> > >
> > > Sure. Here it is. Suspend was done using acpid using a lid action.
> > > psmouse was modprobe -r'ed before suspend and modprobe'ed back in
> > > after resume.
> > >
> >
> > We are trying to resume but KBC signals timeout condition every time we
> > ping AUX port:
> >
> > > drivers/input/serio/i8042.c: 60 -> i8042 (command) [220701]
> > > drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [220701]
> > > drivers/input/serio/i8042.c: d4 -> i8042 (command) [220703]
> > > drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [220703]
> > > drivers/input/serio/i8042.c: fe <- i8042 (interrupt, AUX, 12, timeout) [220725]
> > > drivers/input/serio/i8042.c: d4 -> i8042 (command) [220726]
> > > drivers/input/serio/i8042.c: ed -> i8042 (parameter) [220726]
> > > drivers/input/serio/i8042.c: fe <- i8042 (interrupt, AUX, 12, timeout) [220747]
> > > drivers/input/serio/i8042.c: 60 -> i8042 (command) [220748]
> > > drivers/input/serio/i8042.c: 45 -> i8042 (parameter) [220748]
> > > drivers/input/serio/i8042.c: 60 -> i8042 (command) [220943]
> > > drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [220943]
> > > drivers/input/serio/i8042.c: d4 -> i8042 (command) [220943]
> > > drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [220943]
> > > drivers/input/serio/i8042.c: fe <- i8042 (interrupt, AUX, 12, timeout) [220965]
> >
> > Could you please try the patch below?
>
> Ok, patch applied (against 2.6.12-rc5, clean, offset 2 lines for both
> hunk 3 and 4). Mouse still doesn't work on resume. dmesg
> w/i8042.debug set on kernel command line attached covering one
> suspend/resume.
>
OK, that did not work... Could you try compiling without support for EC
(Embedded Controller) and also try enabling PNP support.
CCing Vojtech - maybe he has some ideas...
--
Dmitry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
