Hi,
I was curious how well NCQ works on recent SATA disks (and controllers),
so I hacked in some basic support for NCQ in libata and ahci. First of
all, ahci is a really nice architecture, it was a joy to work with. NCQ
likewise, a pleasure to finally see some sane queueing facility for
SATA/ide!
Results are pretty damn nice, I easily get 30-50% faster random io read
performance without having to try hard.
Now, this patch is not complete. It should work and work well, but error
handling isn't really tested or finished yet (by any stretch of the
imagination). So don't use this on a production machine, it _should_ be
safe to use on your test boxes and for-fun workstations though (I run it
here...). I have tested on ich6 and ich7 generation ahci, and with
Maxtor and Seagate drives.
YMMV. If you try it, do let me know.
Index: drivers/scsi/ahci.c
===================================================================
--- f5c58b6b0cfd2a92fb3b1d1f4cbfdfb3df6f45d6/drivers/scsi/ahci.c (mode:100644)
+++ uncommitted/drivers/scsi/ahci.c (mode:100644)
@@ -19,8 +19,8 @@
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
- * Version 1.0 of the AHCI specification:
- * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * Version 1.1 of the AHCI specification:
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
*
*/
@@ -46,10 +46,13 @@
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_USE_CLUSTERING = 0,
- AHCI_CMD_SLOT_SZ = 32 * 32,
- AHCI_RX_FIS_SZ = 256,
+ AHCI_MAX_CMDS = 32,
+ AHCI_CMD_SZ = 32,
AHCI_CMD_TBL_HDR = 0x80,
- AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16),
+ AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
+ AHCI_RX_FIS_SZ = 256,
+ AHCI_CMD_TOTAL = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16),
+ AHCI_CMD_TBL_SZ = AHCI_MAX_CMDS * AHCI_CMD_TOTAL,
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ +
AHCI_RX_FIS_SZ,
AHCI_IRQ_ON_SG = (1 << 31),
@@ -57,6 +60,7 @@
AHCI_CMD_WRITE = (1 << 6),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB_REG = 0x58, /* offset of SDB Register FIS data */
board_ahci = 0,
@@ -74,6 +78,7 @@
/* HOST_CAP bits */
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
/* registers for each SATA port */
PORT_LST_ADDR = 0x00, /* command list DMA addr */
@@ -161,9 +166,9 @@
dma_addr_t cmd_slot_dma;
void *cmd_tbl;
dma_addr_t cmd_tbl_dma;
- struct ahci_sg *cmd_tbl_sg;
void *rx_fis;
dma_addr_t rx_fis_dma;
+ u32 sactive;
};
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
@@ -181,7 +186,7 @@
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
static u8 ahci_check_err(struct ata_port *ap);
-static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+static inline int ahci_host_intr(struct ata_port *ap);
static Scsi_Host_Template ahci_sht = {
.module = THIS_MODULE,
@@ -189,7 +194,7 @@
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_strategy_handler = ata_scsi_error,
- .can_queue = ATA_DEF_QUEUE,
+ .can_queue = ATA_MAX_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = AHCI_MAX_SG,
.max_sectors = ATA_MAX_SECTORS,
@@ -200,7 +205,7 @@
.dma_boundary = AHCI_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
- .ordered_flush = 1,
+ .ordered_flush = 0, /* conflicts with NCQ for now */
};
static struct ata_port_operations ahci_ops = {
@@ -339,14 +344,11 @@
mem_dma += AHCI_RX_FIS_SZ;
/*
- * Third item: data area for storing a single command
- * and its scatter-gather table
+ * Third item: data area for storing commands and their sg tables
*/
pp->cmd_tbl = mem;
pp->cmd_tbl_dma = mem_dma;
- pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR;
-
ap->private_data = pp;
if (hpriv->cap & HOST_CAP_64)
@@ -478,9 +480,10 @@
ata_tf_from_fis(d2h_fis, tf);
}
-static void ahci_fill_sg(struct ata_queued_cmd *qc)
+static void ahci_fill_sg(struct ata_queued_cmd *qc, int offset)
{
struct ahci_port_priv *pp = qc->ap->private_data;
+ struct ahci_sg *cmd_tbl_sg;
unsigned int i;
VPRINTK("ENTER\n");
@@ -488,6 +491,7 @@
/*
* Next, the S/G list.
*/
+ cmd_tbl_sg = pp->cmd_tbl + offset + AHCI_CMD_TBL_HDR;
for (i = 0; i < qc->n_elem; i++) {
u32 sg_len;
dma_addr_t addr;
@@ -495,21 +499,30 @@
addr = sg_dma_address(&qc->sg[i]);
sg_len = sg_dma_len(&qc->sg[i]);
- pp->cmd_tbl_sg[i].addr = cpu_to_le32(addr & 0xffffffff);
- pp->cmd_tbl_sg[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
- pp->cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len - 1);
+ cmd_tbl_sg[i].addr = cpu_to_le32(addr & 0xffffffff);
+ cmd_tbl_sg[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len - 1);
}
}
static void ahci_qc_prep(struct ata_queued_cmd *qc)
{
struct ahci_port_priv *pp = qc->ap->private_data;
- u32 opts;
+ void *port_mmio = (void *) qc->ap->ioaddr.cmd_addr;
const u32 cmd_fis_len = 5; /* five dwords */
+ dma_addr_t cmd_tbl_dma;
+ u32 opts;
+ int offset;
+
+ if (qc->flags & ATA_QCFLAG_NCQ) {
+ pp->sactive |= (1 << qc->tag);
+
+ writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
+ readl(port_mmio + PORT_SCR_ACT); /* flush */
+ }
/*
- * Fill in command slot information (currently only one slot,
- * slot 0, is currently since we don't do queueing)
+ * Fill in command slot information
*/
opts = (qc->n_elem << 16) | cmd_fis_len;
@@ -528,21 +541,28 @@
break;
}
- pp->cmd_slot[0].opts = cpu_to_le32(opts);
- pp->cmd_slot[0].status = 0;
- pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff);
- pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
+ /*
+ * the tag determines the offset into the allocated cmd table
+ */
+ offset = qc->tag * AHCI_CMD_TOTAL;
+
+ cmd_tbl_dma = pp->cmd_tbl_dma + offset;
+
+ pp->cmd_slot[qc->tag].opts = cpu_to_le32(opts);
+ pp->cmd_slot[qc->tag].status = 0;
+ pp->cmd_slot[qc->tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
+ pp->cmd_slot[qc->tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
/*
* Fill in command table information. First, the header,
* a SATA Register - Host to Device command FIS.
*/
- ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0);
+ ata_tf_to_fis(&qc->tf, pp->cmd_tbl + offset, 0);
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
- ahci_fill_sg(qc);
+ ahci_fill_sg(qc, offset);
}
static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
@@ -593,7 +613,70 @@
printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id);
}
-static void ahci_eng_timeout(struct ata_port *ap)
+static void dump_log_page(unsigned char *p)
+{
+ int i;
+
+ printk("LOG 0x10: nq=%d, tag=%d\n", p[0] >> 7, p[0] & 0x1f);
+
+ for (i = 2; i < 14; i++)
+ printk("%d:%d ", i, p[i]);
+
+ printk("\n");
+}
+
+static void ahci_host_ncq_intr_err(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void *mmio = ap->host_set->mmio_base;
+ void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ unsigned long flags;
+ char *buffer;
+
+ printk(KERN_ERR "ata%u: ncq interrupt error\n", ap->id);
+
+ /*
+ * error all io first
+ */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+
+ while (pp->sactive) {
+ struct ata_queued_cmd *qc;
+ int tag = ffs(pp->sactive) - 1;
+
+ pp->sactive &= ~(1 << tag);
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc)
+ ata_qc_complete(qc, ATA_ERR);
+ }
+
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT));
+
+ buffer = kmalloc(512, GFP_KERNEL);
+ if (!buffer) {
+ printk(KERN_ERR "ata%u: unable to allocate memory for error\n", ap->id);
+ return;
+ }
+
+ if (ata_read_log_page(ap, 0, 0x10, buffer, 1))
+ printk(KERN_ERR "ata%u: unable to read log page\n", ap->id);
+ else
+ dump_log_page(buffer);
+
+ kfree(buffer);
+}
+
+/*
+ * TODO: needs to use READ_LOG_EXT/page=10h to retrieve error information
+ */
+static void ahci_ncq_timeout(struct ata_port *ap)
+{
+ ahci_host_ncq_intr_err(ap);
+}
+
+static void ahci_nonncq_timeout(struct ata_port *ap)
{
void *mmio = ap->host_set->mmio_base;
void *port_mmio = ahci_port_base(mmio, ap->port_no);
@@ -617,13 +700,65 @@
qc->scsidone = scsi_finish_command;
ata_qc_complete(qc, ATA_ERR);
}
+}
+static void ahci_eng_timeout(struct ata_port *ap)
+{
+ if (ap->ncq_depth)
+ ahci_ncq_timeout(ap);
+ else
+ ahci_nonncq_timeout(ap);
}
-static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+static inline void ahci_host_ncq_intr(struct ata_port *ap, u32 status)
{
+ struct ahci_port_priv *pp = ap->private_data;
void *mmio = ap->host_set->mmio_base;
void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ u32 tags, sactive;
+
+ if (status & PORT_IRQ_D2H_REG_FIS) {
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+
+ /*
+ * pre-BSY clear error, let timeout error handling take care
+ * of it when it kicks in
+ */
+ if (d2h_fis[2] & ATA_ERR)
+ return;
+ } else if (status & PORT_IRQ_SDB_FIS) {
+ u8 *sdb_fis = pp->rx_fis + RX_FIS_SDB_REG;
+
+ if (sdb_fis[1] & ATA_ERR)
+ return;
+ }
+
+ /*
+ * SActive will have the bits cleared for completed commands
+ */
+ sactive = readl(port_mmio + PORT_SCR_ACT);
+ tags = pp->sactive & ~sactive;
+
+ while (tags) {
+ struct ata_queued_cmd *qc;
+ int tag = ffs(tags) - 1;
+
+ tags &= ~(1 << tag);
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc)
+ ata_qc_complete(qc, 0);
+ else
+ printk(KERN_ERR "ahci: missing tag %d\n", tag);
+ }
+
+ pp->sactive = sactive;
+}
+
+static inline int ahci_host_intr(struct ata_port *ap)
+{
+ void *mmio = ap->host_set->mmio_base;
+ void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ struct ata_queued_cmd *qc;
u32 status, serr, ci;
serr = readl(port_mmio + PORT_SCR_ERR);
@@ -632,18 +767,27 @@
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
- ci = readl(port_mmio + PORT_CMD_ISSUE);
- if (likely((ci & 0x1) == 0)) {
- if (qc) {
- ata_qc_complete(qc, 0);
- qc = NULL;
+ if (ap->ncq_depth) {
+ if (!serr)
+ ahci_host_ncq_intr(ap, status);
+ else
+ ahci_host_ncq_intr_err(ap);
+ } else {
+ ci = readl(port_mmio + PORT_CMD_ISSUE);
+ if (likely((ci & 0x1) == 0)) {
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc) {
+ ata_qc_complete(qc, 0);
+ qc = NULL;
+ }
}
- }
- if (status & PORT_IRQ_FATAL) {
- ahci_intr_error(ap, status);
- if (qc)
- ata_qc_complete(qc, ATA_ERR);
+ if (status & PORT_IRQ_FATAL) {
+ ahci_intr_error(ap, status);
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc)
+ ata_qc_complete(qc, ATA_ERR);
+ }
}
return 1;
@@ -683,9 +827,7 @@
ap = host_set->ports[i];
tmp = irq_stat & (1 << i);
if (tmp && ap) {
- struct ata_queued_cmd *qc;
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (ahci_host_intr(ap, qc))
+ if (ahci_host_intr(ap))
irq_ack |= (1 << i);
}
}
@@ -707,10 +849,7 @@
struct ata_port *ap = qc->ap;
void *port_mmio = (void *) ap->ioaddr.cmd_addr;
- writel(1, port_mmio + PORT_SCR_ACT);
- readl(port_mmio + PORT_SCR_ACT); /* flush */
-
- writel(1, port_mmio + PORT_CMD_ISSUE);
+ writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
return 0;
@@ -1027,6 +1166,9 @@
if (rc)
goto err_out_hpriv;
+ if (hpriv->cap & HOST_CAP_NCQ)
+ probe_ent->host_flags |= ATA_FLAG_NCQ;
+
ahci_print_info(probe_ent);
/* FIXME: check ata_device_add return value */
Index: drivers/scsi/libata-core.c
===================================================================
--- f5c58b6b0cfd2a92fb3b1d1f4cbfdfb3df6f45d6/drivers/scsi/libata-core.c (mode:100644)
+++ uncommitted/drivers/scsi/libata-core.c (mode:100644)
@@ -519,7 +519,7 @@
* LOCKING:
* None.
*/
-static int ata_prot_to_cmd(int protocol, int lba48)
+static int ata_prot_to_cmd(int protocol, int lba48, int ncq)
{
int rcmd = 0, wcmd = 0;
@@ -535,7 +535,10 @@
break;
case ATA_PROT_DMA:
- if (lba48) {
+ if (ncq) {
+ rcmd = ATA_CMD_FPDMA_READ;
+ wcmd = ATA_CMD_FPDMA_WRITE;
+ } else if (lba48) {
rcmd = ATA_CMD_READ_EXT;
wcmd = ATA_CMD_WRITE_EXT;
} else {
@@ -568,6 +571,7 @@
{
int pio = (dev->flags & ATA_DFLAG_PIO);
int lba48 = (dev->flags & ATA_DFLAG_LBA48);
+ int ncq = (dev->flags & ATA_DFLAG_NCQ);
int proto, cmd;
if (pio)
@@ -575,7 +579,7 @@
else
proto = dev->xfer_protocol = ATA_PROT_DMA;
- cmd = ata_prot_to_cmd(proto, lba48);
+ cmd = ata_prot_to_cmd(proto, lba48, ncq);
if (cmd < 0)
BUG();
@@ -1139,6 +1143,10 @@
goto err_out_nosup;
}
+ if (ap->flags & ATA_FLAG_NCQ)
+ if (ata_id_queue_depth(dev->id) > 1)
+ dev->flags |= ATA_DFLAG_NCQ;
+
if (ata_id_has_lba48(dev->id)) {
dev->flags |= ATA_DFLAG_LBA48;
dev->n_sectors = ata_id_u64(dev->id, 100);
@@ -1149,11 +1157,12 @@
ap->host->max_cmd_len = 16;
/* print device info to dmesg */
- printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n",
+ printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s %s\n",
ap->id, device,
ata_mode_string(xfer_modes),
(unsigned long long)dev->n_sectors,
- dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "");
+ dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "",
+ dev->flags & ATA_DFLAG_NCQ ? "(NCQ)" : "");
}
/* ATAPI-specific feature tests */
@@ -1187,6 +1196,74 @@
}
/**
+ * ata_read_log_page - read a specific log page
+ * @ap: port on which device we wish to probe resides
+ * @device: device bus address, starting at zero
+ * @page: page to read
+ * @buffer: where to store the read data
+ * @sectors: how much data to read
+ *
+ * After reading the device information page, we use several
+ * bits of information from it to initialize data structures
+ * that will be used during the lifetime of the ata_device.
+ * Other data from the info page is used to disqualify certain
+ * older ATA devices we do not wish to support.
+ *
+ * LOCKING:
+ * Grabs host_set lock.
+ */
+
+int ata_read_log_page(struct ata_port *ap, unsigned int device, char page,
+ char *buffer, unsigned int sectors)
+{
+ struct ata_device *dev = &ap->device[device];
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ u8 status;
+ int rc;
+
+ assert(dev->class == ATA_DEV_ATA);
+
+ ata_dev_select(ap, device, 1, 1);
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ ata_sg_init_one(qc, buffer, sectors << 9);
+ qc->dma_dir = DMA_FROM_DEVICE;
+ qc->tf.protocol = ATA_PROT_PIO;
+ qc->nsect = sectors;
+
+ qc->tf.command = ATA_CMD_READ_LOG_EXT;
+ qc->tf.nsect = sectors;
+ qc->tf.hob_nsect = sectors >> 8;
+ qc->tf.lbal = page;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ printk("RLP issue\n");
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+ printk("RLP issue done\n");
+
+ if (rc)
+ return -EIO;
+
+ wait_for_completion(&wait);
+
+ printk("RLP wait done\n");
+
+ status = ata_chk_status(ap);
+ if (status & (ATA_ERR | ATA_ABORTED))
+ return -EIO;
+
+ return 0;
+}
+
+/**
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
*
@@ -2753,6 +2830,16 @@
struct ata_port *ap = qc->ap;
unsigned int tag, do_clear = 0;
+ if (likely(qc->flags & ATA_QCFLAG_ACCOUNT)) {
+ if (qc->flags & ATA_QCFLAG_NCQ) {
+ assert(ap->ncq_depth);
+ ap->ncq_depth--;
+ } else {
+ assert(ap->depth);
+ ap->depth--;
+ }
+ }
+
qc->flags = 0;
tag = qc->tag;
if (likely(ata_tag_valid(tag))) {
@@ -2770,6 +2857,8 @@
if (likely(do_clear))
clear_bit(tag, &ap->qactive);
+ if (ap->cmd_waiters)
+ wake_up(&ap->cmd_wait_queue);
}
/**
@@ -2848,6 +2937,52 @@
/* never reached */
}
+/*
+ * NCQ and non-NCQ commands are mutually exclusive. So we have to deny a
+ * request to queue a non-NCQ command, if we have NCQ commands in flight (and
+ * vice versa).
+ */
+static inline int ata_qc_issue_ok(struct ata_port *ap,
+ struct ata_queued_cmd *qc, int waiting)
+{
+ /*
+ * if people are already waiting for a queue drain, don't allow a
+ * new 'lucky' queuer to get in there
+ */
+ if (ap->cmd_waiters > waiting)
+ return 0;
+ if (qc->flags & ATA_QCFLAG_NCQ)
+ return !ap->depth;
+
+ return !(ap->ncq_depth + ap->depth);
+}
+
+static void ata_qc_issue_wait(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ DEFINE_WAIT(wait);
+
+ ap->cmd_waiters++;
+
+ do {
+ /*
+ * we rely on the FIFO order of the exclusive waitqueues
+ */
+ prepare_to_wait_exclusive(&ap->cmd_wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+
+ if (!ata_qc_issue_ok(ap, qc, 1)) {
+ spin_unlock_irq(&ap->host_set->lock);
+ schedule();
+ spin_lock_irq(&ap->host_set->lock);
+ }
+
+ finish_wait(&ap->cmd_wait_queue, &wait);
+
+ } while (!ata_qc_issue_ok(ap, qc, 1));
+
+ ap->cmd_waiters--;
+}
+
/**
* ata_qc_issue - issue taskfile to device
* @qc: command to issue to device
@@ -2867,6 +3002,21 @@
int ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ int rc;
+
+ /*
+ * see if we can queue one more command at this point in time, see
+ * comment at ata_qc_issue_ok(). NCQ commands typically originate from
+ * the SCSI layer, we can ask the mid layer to defer those commands
+ * similar to a QUEUE_FULL condition on a 'real' SCSI device
+ */
+ if (!ata_qc_issue_ok(ap, qc, 0)) {
+ if (qc->flags & ATA_QCFLAG_DEFER)
+ return ATA_QC_ISSUE_DEFER;
+
+ ata_qc_issue_wait(ap, qc);
+ assert(ata_qc_issue_ok(ap, qc, 0));
+ }
if (ata_should_dma_map(qc)) {
if (qc->flags & ATA_QCFLAG_SG) {
@@ -2883,12 +3033,24 @@
ap->ops->qc_prep(qc);
qc->ap->active_tag = qc->tag;
- qc->flags |= ATA_QCFLAG_ACTIVE;
+ qc->flags |= (ATA_QCFLAG_ACTIVE | ATA_QCFLAG_ACCOUNT);
+
+ rc = ap->ops->qc_issue(qc);
+ if (rc != ATA_QC_ISSUE_OK)
+ return rc;
- return ap->ops->qc_issue(qc);
+ if (qc->flags & ATA_QCFLAG_NCQ) {
+ assert(ap->ncq_depth < ATA_MAX_QUEUE)
+ ap->ncq_depth++;
+ } else {
+ assert(!ap->depth);
+ ap->depth++;
+ }
+ return ATA_QC_ISSUE_OK;
err_out:
- return -1;
+ ata_qc_free(qc);
+ return ATA_QC_ISSUE_FATAL;
}
/**
@@ -2950,7 +3112,8 @@
default:
WARN_ON(1);
- return -1;
+ ata_qc_free(qc);
+ return ATA_QC_ISSUE_FATAL;
}
return 0;
@@ -3382,6 +3545,8 @@
ap->ops = ent->port_ops;
ap->cbl = ATA_CBL_NONE;
ap->active_tag = ATA_TAG_POISON;
+ init_waitqueue_head(&ap->cmd_wait_queue);
+ ap->cmd_waiters = 0;
ap->last_ctl = 0xFF;
INIT_WORK(&ap->packet_task, atapi_packet_task, ap);
@@ -4017,6 +4182,7 @@
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_id_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_read_log_page);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
Index: drivers/scsi/libata-scsi.c
===================================================================
--- f5c58b6b0cfd2a92fb3b1d1f4cbfdfb3df6f45d6/drivers/scsi/libata-scsi.c (mode:100644)
+++ uncommitted/drivers/scsi/libata-scsi.c (mode:100644)
@@ -336,6 +336,7 @@
if (sdev->id < ATA_MAX_DEVICES) {
struct ata_port *ap;
struct ata_device *dev;
+ int depth;
ap = (struct ata_port *) &sdev->host->hostdata[0];
dev = &ap->device[sdev->id];
@@ -353,6 +354,13 @@
*/
blk_queue_max_sectors(sdev->request_queue, 2048);
}
+
+ if (dev->flags & ATA_DFLAG_NCQ) {
+ int ddepth = ata_id_queue_depth(dev->id) + 1;
+
+ depth = min(sdev->host->can_queue, ddepth);
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
+ }
}
return 0; /* scsi layer doesn't check return value, sigh */
@@ -537,6 +545,7 @@
{
struct ata_taskfile *tf = &qc->tf;
unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
+ unsigned int ncq = qc->dev->flags & ATA_DFLAG_NCQ;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = qc->dev->xfer_protocol;
@@ -550,8 +559,18 @@
tf->flags |= ATA_TFLAG_WRITE;
}
+ if (ncq)
+ qc->flags |= ATA_QCFLAG_NCQ;
+
if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) {
- if (lba48) {
+ if (ncq) {
+ tf->hob_feature = scsicmd[7];
+ tf->feature = scsicmd[8];
+ tf->nsect = qc->tag << 3;
+ tf->hob_lbal = scsicmd[2];
+ qc->nsect = ((unsigned int)scsicmd[7] << 8) |
+ scsicmd[8];
+ } else if (lba48) {
tf->hob_nsect = scsicmd[7];
tf->hob_lbal = scsicmd[2];
@@ -569,7 +588,8 @@
qc->nsect = scsicmd[8];
}
- tf->nsect = scsicmd[8];
+ if (!ncq)
+ tf->nsect = scsicmd[8];
tf->lbal = scsicmd[5];
tf->lbam = scsicmd[4];
tf->lbah = scsicmd[3];
@@ -579,7 +599,14 @@
}
if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
- qc->nsect = tf->nsect = scsicmd[4];
+ qc->nsect = scsicmd[4];
+
+ if (ncq) {
+ tf->nsect = qc->tag << 3;
+ tf->feature = scsicmd[4];
+ } else
+ tf->nsect = scsicmd[4];
+
tf->lbal = scsicmd[3];
tf->lbam = scsicmd[2];
tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */
@@ -593,7 +620,16 @@
if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11])
return 1;
- if (lba48) {
+ if (ncq) {
+ tf->hob_feature = scsicmd[13];
+ tf->feature = scsicmd[12];
+ tf->nsect = qc->tag << 3;
+ tf->hob_lbal = scsicmd[6];
+ tf->hob_lbam = scsicmd[5];
+ tf->hob_lbah = scsicmd[4];
+ qc->nsect = ((unsigned int)scsicmd[12] << 8) |
+ scsicmd[13];
+ } else if (lba48) {
tf->hob_nsect = scsicmd[12];
tf->hob_lbal = scsicmd[6];
tf->hob_lbam = scsicmd[5];
@@ -613,7 +649,8 @@
qc->nsect = scsicmd[13];
}
- tf->nsect = scsicmd[13];
+ if (!ncq)
+ tf->nsect = scsicmd[13];
tf->lbal = scsicmd[9];
tf->lbam = scsicmd[8];
tf->lbah = scsicmd[7];
@@ -666,6 +703,7 @@
{
struct ata_queued_cmd *qc;
u8 *scsicmd = cmd->cmnd;
+ int ret;
VPRINTK("ENTER\n");
@@ -696,9 +734,18 @@
if (xlat_func(qc, scsicmd))
goto err_out;
+ qc->flags |= ATA_QCFLAG_DEFER;
+
/* select device, send command to hardware */
- if (ata_qc_issue(qc))
+ ret = ata_qc_issue(qc);
+ if (ret == ATA_QC_ISSUE_FATAL)
goto err_out;
+ else if (ret == ATA_QC_ISSUE_DEFER) {
+ VPRINTK("DEFER\n");
+ ata_qc_free(qc);
+ cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
+ done(cmd);
+ }
VPRINTK("EXIT\n");
return;
Index: drivers/scsi/scsi_lib.c
===================================================================
--- f5c58b6b0cfd2a92fb3b1d1f4cbfdfb3df6f45d6/drivers/scsi/scsi_lib.c (mode:100644)
+++ uncommitted/drivers/scsi/scsi_lib.c (mode:100644)
@@ -1292,13 +1292,17 @@
shost = sdev->host;
while (!blk_queue_plugged(q)) {
int rtn;
+
+ if (!scsi_dev_queue_ready(q, sdev))
+ break;
+
/*
* get next queueable request. We do this early to make sure
* that the request is fully prepared even if we cannot
* accept it.
*/
req = elv_next_request(q);
- if (!req || !scsi_dev_queue_ready(q, sdev))
+ if (!req)
break;
if (unlikely(!scsi_device_online(sdev))) {
Index: drivers/scsi/scsi_sysfs.c
===================================================================
--- f5c58b6b0cfd2a92fb3b1d1f4cbfdfb3df6f45d6/drivers/scsi/scsi_sysfs.c (mode:100644)
+++ uncommitted/drivers/scsi/scsi_sysfs.c (mode:100644)
@@ -309,12 +309,35 @@
* Create the actual show/store functions and data structures.
*/
sdev_rd_attr (device_blocked, "%d\n");
-sdev_rd_attr (queue_depth, "%d\n");
sdev_rd_attr (type, "%d\n");
sdev_rd_attr (scsi_level, "%d\n");
sdev_rd_attr (vendor, "%.8s\n");
sdev_rd_attr (model, "%.16s\n");
sdev_rd_attr (rev, "%.4s\n");
+sdev_rd_attr (device_busy, "%d\n");
+
+static ssize_t
+sdev_show_queue_depth(struct device *dev, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ return snprintf (buf, 20, "%d\n", sdev->queue_depth);
+}
+
+static ssize_t
+sdev_store_queue_depth(struct device *dev, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ int depth;
+
+ sscanf(buf, "%d\n", &depth);
+
+ if (depth <= sdev->host->can_queue)
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+
+ return count;
+}
+static DEVICE_ATTR(queue_depth, S_IRUGO | S_IWUSR, sdev_show_queue_depth, sdev_store_queue_depth);
static ssize_t
sdev_show_timeout (struct device *dev, char *buf)
@@ -446,6 +469,7 @@
&dev_attr_iorequest_cnt,
&dev_attr_iodone_cnt,
&dev_attr_ioerr_cnt,
+ &dev_attr_device_busy,
NULL
};
Index: include/linux/ata.h
===================================================================
--- f5c58b6b0cfd2a92fb3b1d1f4cbfdfb3df6f45d6/include/linux/ata.h (mode:100644)
+++ uncommitted/include/linux/ata.h (mode:100644)
@@ -79,7 +79,8 @@
ATA_NIEN = (1 << 1), /* disable-irq flag */
ATA_LBA = (1 << 6), /* LBA28 selector */
ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */
- ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */
+ ATA_DEVICE_OBS = (1 << 5), /* obs bits in dev reg */
+ ATA_FPDMA_FUA = (1 << 7), /* FUA cache bypass bit */
ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */
ATA_BUSY = (1 << 7), /* BSY status bit */
ATA_DRDY = (1 << 6), /* device ready */
@@ -125,6 +126,12 @@
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
+ ATA_CMD_FPDMA_READ = 0x60,
+ ATA_CMD_FPDMA_WRITE = 0x61,
+ ATA_CMD_READ_LOG_EXT = 0x2f,
+
+ /* READ_LOG_EXT pages */
+ READ_LOG_SATA_NCQ_PAGE = 0x10,
/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
@@ -234,6 +241,7 @@
#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
#define ata_id_removeable(id) ((id)[0] & (1 << 7))
+#define ata_id_queue_depth(id) ((id)[75] & 0x1f)
#define ata_id_u32(id,n) \
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
#define ata_id_u64(id,n) \
Index: include/linux/libata.h
===================================================================
--- f5c58b6b0cfd2a92fb3b1d1f4cbfdfb3df6f45d6/include/linux/libata.h (mode:100644)
+++ uncommitted/include/linux/libata.h (mode:100644)
@@ -80,7 +80,7 @@
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
- ATA_MAX_QUEUE = 1,
+ ATA_MAX_QUEUE = 32,
ATA_MAX_SECTORS = 200, /* FIXME */
ATA_MAX_BUS = 2,
ATA_DEF_BUSY_WAIT = 10000,
@@ -95,6 +95,7 @@
ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */
+ ATA_DFLAG_NCQ = (1 << 3), /* Device can do NCQ */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -113,11 +114,19 @@
ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
+ ATA_FLAG_NCQ = (1 << 9), /* Can do NCQ */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
+ ATA_QCFLAG_NCQ = (1 << 5), /* using NCQ */
+ ATA_QCFLAG_ACCOUNT = (1 << 6), /* depth accounted */
+ ATA_QCFLAG_DEFER = (1 << 7), /* ok to defer */
+
+ ATA_QC_ISSUE_OK = 0,
+ ATA_QC_ISSUE_DEFER = 1,
+ ATA_QC_ISSUE_FATAL = 2,
/* various lengths of time */
ATA_TMOUT_EDD = 5 * HZ, /* hueristic */
@@ -308,6 +317,11 @@
struct ata_queued_cmd qcmd[ATA_MAX_QUEUE];
unsigned long qactive;
unsigned int active_tag;
+ int ncq_depth;
+ int depth;
+
+ wait_queue_head_t cmd_wait_queue;
+ unsigned int cmd_waiters;
struct ata_host_stats stats;
struct ata_host_set *host_set;
@@ -433,6 +447,8 @@
struct block_device *bdev,
sector_t capacity, int geom[]);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
+extern int ata_read_log_page(struct ata_port *, unsigned int, char, char *,
+ unsigned int);
#ifdef CONFIG_PCI
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
