On Wed, 2005-05-18 at 14:18 -0400, Jeff Garzik wrote:
> Erik Slagter wrote:
> > 1. ICH6M not recognised as being AHCI capable (libata)
> >
> > 2. During startup, libata refuses to talk to the ICH6 using AHCI, I get
> > these messages:
> >
> > libata version 1.10 loaded.
> > ahci version 1.00
> > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
> > ahci: probe of 0000:00:1f.2 failed with error -12
> > ata_piix version 1.03
> >
> > [-12 == ENOMEM???]
>
> You need to either load ata_piix driver, or tell your BIOS to initialize
> AHCI mode.
I do have ata_piix loaded (as you can see in the log). I don't have a
BIOS option to enable AHCI mode, I was hoping linux could force it
somehow.
BTW It works using the ata_piix driver (in legacy mode), but of course
I'd rather have the AHCI mode.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]