Re: PROBLEM: ICH6M not recognised as being AHCI capable (libata)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Erik Slagter wrote:
1. ICH6M not recognised as being AHCI capable (libata)

2. During startup, libata refuses to talk to the ICH6 using AHCI, I get
these messages:
libata version 1.10 loaded.
ahci version 1.00
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
ahci: probe of 0000:00:1f.2 failed with error -12
ata_piix version 1.03

[-12 == ENOMEM???]

You need to either load ata_piix driver, or tell your BIOS to initialize AHCI mode.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux