Could you just try acpi=off ?
On Monday 25 April 2005 22:09, giskard wrote:
> hi all,
>
> The 2.6.* kernel doesn't seems to handle properly the I/O ports for
> devices.
>
> I bought a toshiba satellite a80-111 and with 2.4 series all devices
> work good, with 2.6 series i get some errors:
>
> - the 2.4 kernel uses ide-generic (with sata support) for use the
> hd, with 2.6 i need libata SATA support because i get this error
>
> ide0: I/O resource 0x1F0-0x1F7 not free.
> ide0: ports already in use, skipping probe
>
> - i have a 0000:06:04.0 CardBus bridge: Texas Instruments Texas
> Instruments PCIxx21/ x515 Cardbus Controller
>
> i can get it work with the 2.4 series with no problem (yenta
> socket), the 2.6 series uses also yenta sockets but when i start
> pcmcia service (/ etc/ init.d/pcmcia start) the kernel freezes when it
> checks the i/o ports.
>
>
> mrspurr:/usr/src/linux# uname -a
> Linux mrspurr 2.6.11.7 #12 Mon Apr 18 01:51:04 CEST 2005 i686 GNU/Linux
>
> i attached lspci -vvv log, iomem log, ioports log, cpuinfo log
>
> thank you in advance
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]