Re: Adaptec 2010S i2o + x86_64 doesn't work

[Markus Lidel <Markus.Lidel@shadowconnect.com>]

Hello,

Alan Cox wrote:
> On Gwe, 2005-04-15 at 17:15, Miquel van Smoorenburg wrote:
> > However, I removed 2 GB from the box as Alan sugggested and now the box
> > comes up just fine with a 64-bit 2.6.11.6 kernel! I've put the 4GB back,
> > and booted with the kernel "mem=2048" command line option - that also
> > works, the i2o_block driver sees the adaptec controller just fine.
> > And I just booted it with "mem=3840M" and that works too.
> > So the problem appears to be 4 GB memory in 64 bit mode, on this box.

OK, i never tried it with 4 GB so it really could be a problem...

> Or the driver is incorrectly handling 64/32bit DMA limit masks which
> would be my first guess here, and would explain why it works on AMD
> Athlon64 boxes.

Hmmm, i only set DMA_32BIT_MASK and don't do anything special on 64-bit 
systems... Is there anything else to do for correct DMA mapping?

Best regards,


Markus Lidel
------------------------------------------
Markus Lidel (Senior IT Consultant)

Shadow Connect GmbH
Carl-Reisch-Weg 12
D-86381 Krumbach
Germany

Phone:  +49 82 82/99 51-0
Fax:    +49 82 82/99 51-11

E-Mail: Markus.Lidel@shadowconnect.com
URL:    http://www.shadowconnect.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/