Re: Adaptec 2010S i2o + x86_64 doesn't work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Gwe, 2005-04-15 at 17:15, Miquel van Smoorenburg wrote:
> However, I removed 2 GB from the box as Alan sugggested and now the box
> comes up just fine with a 64-bit 2.6.11.6 kernel! I've put the 4GB back,
> and booted with the kernel "mem=2048" command line option - that also
> works, the i2o_block driver sees the adaptec controller just fine.
> 
> And I just booted it with "mem=3840M" and that works too.
> 
> So the problem appears to be 4 GB memory in 64 bit mode, on this box.

Or the driver is incorrectly handling 64/32bit DMA limit masks which
would be my first guess here, and would explain why it works on AMD
Athlon64 boxes.

Alan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux