Re: How's the nforce4 support in Linux?

[Julien Wajsberg <julien.wajsberg@gmail.com>]

On Fri, 25 Mar 2005 18:21:42 -0500, Lee Revell <rlrevell@joe-job.com> wrote:
> On Fri, 2005-03-25 at 23:59 +0100, Julien Wajsberg wrote:
> > Mar 25 22:42:55 evenflow kernel: hda: dma_timer_expiry: dma status == 0x60
> > Mar 25 22:42:55 evenflow kernel: hda: DMA timeout retry
> > Mar 25 22:42:55 evenflow kernel: hda: timeout waiting for DMA
> > Mar 25 22:42:55 evenflow kernel: hda: status error: status=0x58 {
> > DriveReady SeekComplete DataRequest }
> > Mar 25 22:42:55 evenflow kernel:
> > Mar 25 22:42:55 evenflow kernel: ide: failed opcode was: unknown
> > Mar 25 22:42:55 evenflow kernel: hda: drive not ready for command
> > Mar 25 22:42:55 evenflow kernel: hda: status timeout: status=0xd0 { Busy }
> > Mar 25 22:42:55 evenflow kernel:
> > Mar 25 22:42:55 evenflow kernel: ide: failed opcode was: unknown
> > Mar 25 22:42:55 evenflow kernel: hdb: DMA disabled
> > Mar 25 22:42:55 evenflow kernel: hda: drive not ready for command
> 
> Are you sure the drive is OK?  Those messages are the classic signs of a
> failing drive...

It's nearly new, and it was ok in my last computer (an old P3-500 with
PIIX4, IIRC).
BTW I did a complete badblocks check on it, and it found nothing.

-- 
Julien
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/