Re: How's the nforce4 support in Linux?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2005-03-25 at 23:59 +0100, Julien Wajsberg wrote:
> Mar 25 22:42:55 evenflow kernel: hda: dma_timer_expiry: dma status == 0x60
> Mar 25 22:42:55 evenflow kernel: hda: DMA timeout retry
> Mar 25 22:42:55 evenflow kernel: hda: timeout waiting for DMA
> Mar 25 22:42:55 evenflow kernel: hda: status error: status=0x58 {
> DriveReady SeekComplete DataRequest }
> Mar 25 22:42:55 evenflow kernel: 
> Mar 25 22:42:55 evenflow kernel: ide: failed opcode was: unknown
> Mar 25 22:42:55 evenflow kernel: hda: drive not ready for command
> Mar 25 22:42:55 evenflow kernel: hda: status timeout: status=0xd0 { Busy }
> Mar 25 22:42:55 evenflow kernel: 
> Mar 25 22:42:55 evenflow kernel: ide: failed opcode was: unknown
> Mar 25 22:42:55 evenflow kernel: hdb: DMA disabled
> Mar 25 22:42:55 evenflow kernel: hda: drive not ready for command

Are you sure the drive is OK?  Those messages are the classic signs of a
failing drive...

Lee

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux