On Thu 24 Mar 2005, Neil Brown wrote:
> On Tuesday March 22, [email protected] wrote:
> > This is on kernel 2.6.11, mdadm 1.4.0
> >
> > The system has MD devices that are auto-configured on boot.
> >
> > However, there are also devices connected via another SCSI adapter
> > (actually, a Qlogic QLA2300). I'm using a module for that. As the
> > auto-configure only runs at boot (or rather, when the md subsystem is
> > started). I wanted to restart a raid-0 device that I had previously
> > created. I did:
> >
> > mdadm --run /dev/md10
>
> As you admit, this is wrong. You want something like
> mdadm --assemble /dev/md10 /dev/.....(list of component devices)
>
> or describe the md10 array (e.g. via UUID) in /etc/mdadm.conf
It took a bit of trial and error (I find the mdadm docs a bit
confusing...) but I came up with this:
mdadm --assemble --super-minor=10 --config=partitions /dev/md10
> > error message in the subject, and a "COMPLETE RAID STATE PRINTOUT"...
> > In that output there is a line "md10:", the next line is
> > "md1: <sde1><sdd1><sdc1><sdb1><sda1>".
> >
> >
> > Admittedly the usage may be wrong, but having the kernel say "bug" can't
> > be right :-)
> >
>
> Yes, there are quite a few of those silly bug messages. I've removed
> a few, but have not yet gone through and checked and removed all the
> bad ones.
Keep up the good work :-)
Paul Slootman
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]