On Sat, 2011-03-05 at 21:35 +0000, Triadi Krisnawan wrote: > Hi Doc, > > Thanks for the info. > I think I could take off the first posibility because it was working > fine before with higher resolution 4 weeks ago. But after I rebooted > the machine went to lower resolution (1024x768) and started > flickering. So the KVM might not be the problem. > > I will try to use the gft command. I am assuming that this command can > run in any terminal right? > And also which are the two lines to be copy? > Are they : > 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz > Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 > > Or > Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 > 1028 1060 -HSync +Vsync > > Thanks Doc, > Triadi > > > > > > Two possibilities. > > > > (1) Your VGA splitter device might limit its output resolution to > > 1024x768. That's common with VGA-type KVMs. > > > > (2) Your Modeline statement looks incomplete. Try using the gtf > utility: > > $ gtf 1280 1024 60 > > You'll get an output line that looks like this: > > # 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz > > Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 > > 1028 1060 -HSync +Vsync > > > > Try copying and pasting those two lines into your xorg.conf file. I > had > > to replace the underscore '_' character in the double-quotes string > with > > a space ' ' to get it to work in my system. > > > > Hope this helps. Triadi, The gtf utility actually outputs two lines. The second shown in my reply wraps onto a third line. It should be clear when you run the gtf utility yourself. --Doc -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
