On 1/25/06, Steven Ringwald <asric@xxxxxxxxx> wrote: > > Sorry. It has been a long day. The command is actually 'ethtool', and is > located in the /sbin directory. > > /sbin/ethtool eth0 Steve, you're actually correct. There is an mii-tool command (and an mii-diag), you just forgot the dash. ;-) [root@circe ~]# mii-tool eth0 eth0: negotiated 100baseTx-FD flow-control, link ok [root@circe ~]# mii-diag eth0 Basic registers of MII PHY #1: 3000 782d 02a8 0154 05e1 45e1 0001 0000. The autonegotiated capability is 01e0. The autonegotiated media type is 100baseTx-FD. Basic mode control register 0x3000: Auto-negotiation enabled. You have link beat, and everything is working OK. Your link partner advertised 45e1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control. End of basic transceiver information. [root@circe ~]# -- Chris "I trust the Democrats to take away my money, which I can afford. I trust the Republicans to take away my freedom, which I cannot."
