Hello there,
I am at a conference with a wireless network and
desperately trying to make it work. I am new to NetworkManager but it
been working successfully for non-key networks. Here I need a key.
Card: Intersil PRISM2 11Mbps Wireless Adapter
Driver orinoco_cs/orinoco/hermes
The 'closest' attempt seemed to be the first. A helpful local system
guy could see I was authorising, but not getting DHCP. But as DHCP
worked for everyone else that was my problem.
I tried to disable Networkmanager, and do things by hand but just got
lots of error -16's and nothing worked again all day.
Any ideas anyone? The log from the first try follows:
Thanks,
Bill
Sep 12 09:28:35 wjmurray ntpd[2311]: synchronized to LOCAL(0), stratum 5
Sep 12 09:28:35 wjmurray ntpd[2311]: kernel time sync disabled 0041
Sep 12 09:29:38 wjmurray ntpd[2311]: kernel time sync enabled 0001
Sep 12 09:29:43 wjmurray NetworkManager: <WARNING> ():
org.freedesktop.NetworkManagerInfo.BadNetworkData raised
'NetworkManagerInfo::getNetworkProperties could not access essid for
network 'networks''
Sep 12 09:31:24 wjmurray last message repeated 3 times
Sep 12 09:31:24 wjmurray NetworkManager: <WARNING> ():
org.freedesktop.NetworkManagerInfo.BadNetworkData raised
'NetworkManagerInfo::getNetworkProperties could not access essid for
network 'networks''
Sep 12 09:31:26 wjmurray kernel: eth1: New link status: Disconnected
(0002)
Sep 12 09:31:27 wjmurray kernel: hermes @ 00010100: Timeout waiting for
command 0x0002 completion.
Sep 12 09:31:27 wjmurray kernel: eth1: Unable to disable port while
reconfiguring card
Sep 12 09:31:27 wjmurray kernel: eth1: Resetting instead...
Sep 12 09:31:27 wjmurray NetworkManager: <WARNING> ():
nm_device_set_essid(): error setting ESSID 'Physics_M' for device eth1.
errno = 16
Sep 12 09:31:27 wjmurray kernel: eth1: New link status: Connected (0001)
Sep 12 09:31:29 wjmurray NetworkManager: dhcp_interface_init: MAC
address = 00:02:2d:5b:3d:f6
Sep 12 09:31:29 wjmurray NetworkManager: Broadcasting DHCP_DISCOVER
Sep 12 09:31:29 wjmurray NetworkManager: DHCP: Starting request loop,
overall start_time = {1126513889s, 458697us}
Sep 12 09:31:29 wjmurray NetworkManager: DHCP: Request sent, waiting for
reply...
Sep 12 09:31:46 wjmurray last message repeated 2 times
Sep 12 09:31:56 wjmurray NetworkManager: DHCP: Got some data of length
63.
Sep 12 09:31:56 wjmurray NetworkManager: DHCP: Reply message's source
port (32771) was not the DHCP server port number (67), won't use it.
Sep 12 09:31:59 wjmurray NetworkManager: DHCP: Got some data of length
102.
Sep 12 09:31:59 wjmurray NetworkManager: DHCP: Reply message was not UDP
(ip_hdr->protocol = 1, IPPROTO_UDP = 17), won't use it.
Sep 12 09:31:59 wjmurray NetworkManager: DHCP: Got some data of length
84.
Sep 12 09:31:59 wjmurray NetworkManager: DHCP: Reply message was not UDP
(ip_hdr->protocol = 1, IPPROTO_UDP = 17), won't use it.
Sep 12 09:31:59 wjmurray NetworkManager: DHCP: Got some data of length
65.
Sep 12 09:31:59 wjmurray NetworkManager: DHCP: Reply message's source
port (32772) was not the DHCP server port number (67), won't use it.
Sep 12 09:32:00 wjmurray kernel: eth1: New link status: Connected (0001)
Sep 12 09:32:54 wjmurray NetworkManager: <WARNING> ():
org.freedesktop.NetworkManagerInfo.BadNetworkData raised
'NetworkManagerInfo::getNetworkProperties could not access essid for
network 'networks''
Sep 12 09:33:02 wjmurray kernel: eth1: New link status: Connected (0001)
Sep 12 09:33:05 wjmurray NetworkManager: dhcp_interface_init: MAC
address = 00:02:2d:5b:3d:f6
Sep 12 09:33:05 wjmurray NetworkManager: Broadcasting DHCP_DISCOVER
Sep 12 09:33:05 wjmurray NetworkManager: DHCP: Starting request loop,
overall start_time = {1126513985s, 297190us}
Sep 12 09:33:05 wjmurray NetworkManager: DHCP: Request sent, waiting for
reply...
Sep 12 09:33:22 wjmurray last message repeated 2 times
Sep 12 09:33:33 wjmurray NetworkManager: DHCP: Got some data of length
58.
Sep 12 09:33:33 wjmurray NetworkManager: DHCP: Reply message's source
port (32830) was not the DHCP server port number (67), won't use it.
Sep 12 09:33:36 wjmurray kernel: eth1: New link status: Connected (0001)
