Re: fix typo in geode_configre()@cyrix.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi. Thanks Sorensen and Juergen.

I overlooked the restored to CCR3.
The bit4(0x10, MAPEN) of CCR3 is necessary to access advanced configuration registers.
I'll repost patch.

  - restore CCR3
  - fix use 0x30 instead of 0x38.

--- linux-2.6.19.orig/arch/i386/kernel/cpu/cyrix.c	2006-11-30 06:57:37.000000000 +0900
+++ linux-2.6.19/arch/i386/kernel/cpu/cyrix.c	2007-01-17 16:15:40.000000000 +0900
@@ -161,19 +161,18 @@ static void __cpuinit set_cx86_inc(void)
 static void __cpuinit geode_configure(void)
 {
 	unsigned long flags;
-	u8 ccr3, ccr4;
+	u8 ccr3;
 	local_irq_save(flags);
 
 	/* Suspend on halt power saving and enable #SUSP pin */
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
 
 	ccr3 = getCx86(CX86_CCR3);
-	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* Enable */
+	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable  MAPEN */
 	
-	ccr4 = getCx86(CX86_CCR4);
-	ccr4 |= 0x38;		/* FPU fast, DTE cache, Mem bypass */
-	
-	setCx86(CX86_CCR3, ccr3);
+	/* FPU fast, DTE cache, Mem bypass */
+	setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
 	
 	set_cx86_memwb();
 	set_cx86_reorder();	
@@ -415,15 +414,14 @@ static void __cpuinit cyrix_identify(str
 		
    	        if (dir0 == 5 || dir0 == 3)
    	        {
-			unsigned char ccr3, ccr4;
+			unsigned char ccr3;
 			unsigned long flags;
 			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
 			local_irq_save(flags);
 			ccr3 = getCx86(CX86_CCR3);
-			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
-			ccr4 = getCx86(CX86_CCR4);
-			setCx86(CX86_CCR4, ccr4 | 0x80);          /* enable cpuid  */
-			setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
+			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);      /* enable MAPEN  */
+			setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid  */
+			setCx86(CX86_CCR3, ccr3);                      /* disable MAPEN */
 			local_irq_restore(flags);
 		}
 	}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux