[PATCH] svwks: small cleanup
* remove redundant svwks_ide_dma_end() [ __ide_dma_end() is used by default ]
* remove init_dma_svwks() so the default ide_setup_dma() function is used
[ init_setup_csb6() takes care of not initializing disabled channels ]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
drivers/ide/pci/serverworks.c | 34 ++++------------------------------
1 file changed, 4 insertions(+), 30 deletions(-)
Index: a/drivers/ide/pci/serverworks.c
===================================================================
--- a.orig/drivers/ide/pci/serverworks.c
+++ a/drivers/ide/pci/serverworks.c
@@ -339,13 +339,6 @@ fast_ata_pio:
return 0;
}
-/* This can go soon */
-
-static int svwks_ide_dma_end (ide_drive_t *drive)
-{
- return __ide_dma_end(drive);
-}
-
static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name)
{
unsigned int reg;
@@ -537,10 +530,10 @@ static void __devinit init_hwif_svwks (i
}
hwif->ide_dma_check = &svwks_config_drive_xfer_rate;
- if (hwif->pci_dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE)
- hwif->ide_dma_end = &svwks_ide_dma_end;
- else if (!(hwif->udma_four))
- hwif->udma_four = ata66_svwks(hwif);
+ if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
+ if (!hwif->udma_four)
+ hwif->udma_four = ata66_svwks(hwif);
+ }
if (!noautodma)
hwif->autodma = 1;
@@ -551,21 +544,6 @@ static void __devinit init_hwif_svwks (i
hwif->drives[1].autotune = (!(dma_stat & 0x40));
}
-/*
- * We allow the BM-DMA driver to only work on enabled interfaces.
- */
-static void __devinit init_dma_svwks (ide_hwif_t *hwif, unsigned long dmabase)
-{
- struct pci_dev *dev = hwif->pci_dev;
-
- if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
- (!(PCI_FUNC(dev->devfn) & 1)) && (hwif->channel))
- return;
-
- ide_setup_dma(hwif, dmabase, 8);
-}
-
static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d)
{
return ide_setup_pci_device(dev, d);
@@ -600,7 +578,6 @@ static ide_pci_device_t serverworks_chip
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
@@ -609,7 +586,6 @@ static ide_pci_device_t serverworks_chip
.init_setup = init_setup_csb6,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
@@ -618,7 +594,6 @@ static ide_pci_device_t serverworks_chip
.init_setup = init_setup_csb6,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
@@ -627,7 +602,6 @@ static ide_pci_device_t serverworks_chip
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
