Re: SATA/IDE Dual Mode w/Intel 945 Chipset or HOW TO LIQUIFY a flash IDE chip under 2.6.18

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 09, 2007 at 01:46:42PM -0700, Jeff V. Merkey wrote:
> I just finished pulling out a melted IDE flash drive out of a Shuttle 
> motherboard with the intel 945 chipset which claims to support
> SATA and IDE drives concurrently under Linux 2.6.18.
> 
> The chip worked for about 30 seconds before liquifying in the chassis.  
> I note that the 945 chipset in the shuttle PC had some serious
> issues recognizing 2 x SATA devices and a IDE device concurrently.   Are 
> there known problems with the Linux drivers
> with these newer chipsets.

Had the drive ever been used in any other machine?  Had any ide device
ever been used in this machine before?  It really sounds like a hardware
problem, since I can't think of anything software could do to make that
kind of current go through the flash drive.

I remember seeing the controller chip on a 730MB quantum scsi drive
start to glow red many years ago, just before the drive stopped
responding to the system (and I turned off the power).  Hardware does
fail.  It almost never has anything to do with software.

--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux