[2.6 patch] drivers/media/dvb/frontends/mt312.c: cleanups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Feb 05, 2006 at 01:59:09AM -0500, Michael Krufky wrote:
> Adrian Bunk wrote:
>...
> >+	if (state->id == ID_VP310){
> >+		strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
> >+		state->frequency = 90;
> >+	} else if (state->id == ID_MT312) {
> >+		strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
> >+		state->frequency = 60;
> >+	} else
> >+		goto error;
> 
> ^^^ I would prefer to see this as a switch..case block, in the spirit of 
> nxt200x and lgdt330x.

Updated patch below.

>...
> >-EXPORT_SYMBOL(mt312_attach);
> >-EXPORT_SYMBOL(vp310_attach);
> >+EXPORT_SYMBOL(vp310_mt312_attach);
> 
> ^^^ I think vp310_mt312_attach is starting to get long, maybe even ugly. 
>  Isn't mt312_attach enough, considering that it is the name of the 
> module?  I think just mt312_attach would be nicer, unless someone thinks 
> otherwise?
>...

I kept it based on Johannes' comment.

> -Michael Krufky

cu
Adrian


<--  snip  -->


This patch contains the following possible cleanups:
- update the Kconfig help to mention the VP310
- merge vp310_attach and mt312_attach into a new vp310_mt312_attach
  to remove some code duplication


Signed-off-by: Adrian Bunk <[email protected]>

---

 drivers/media/dvb/b2c2/flexcop-fe-tuner.c |    2 
 drivers/media/dvb/frontends/Kconfig       |    2 
 drivers/media/dvb/frontends/mt312.c       |  116 ++++++++--------------
 drivers/media/dvb/frontends/mt312.h       |    6 -
 4 files changed, 48 insertions(+), 78 deletions(-)

--- linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/Kconfig.old	2006-01-28 17:12:59.000000000 +0100
+++ linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/Kconfig	2006-01-28 17:13:26.000000000 +0100
@@ -29,7 +29,7 @@
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT312
-	tristate "Zarlink MT312 based"
+	tristate "Zarlink VP310/MT312 based"
 	depends on DVB_CORE
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
--- linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/mt312.h.old	2006-01-28 17:23:16.000000000 +0100
+++ linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/mt312.h	2006-01-28 17:23:45.000000000 +0100
@@ -38,10 +38,8 @@
 	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
 };
 
-extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
-					 struct i2c_adapter* i2c);
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+					struct i2c_adapter* i2c);
 
-extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
-					 struct i2c_adapter* i2c);
 
 #endif // MT312_H
--- linux-2.6.16-rc1-mm3-full/drivers/media/dvb/b2c2/flexcop-fe-tuner.c.old	2006-01-28 17:17:41.000000000 +0100
+++ linux-2.6.16-rc1-mm3-full/drivers/media/dvb/b2c2/flexcop-fe-tuner.c	2006-01-28 17:29:53.000000000 +0100
@@ -526,7 +526,7 @@
 		info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
 	} else
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
-	if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+	if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
 		ops = fc->fe->ops;
 
 		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;

--- linux-2.6.16-rc1-mm5-full/drivers/media/dvb/frontends/mt312.c.old	2006-02-07 23:17:04.000000000 +0100
+++ linux-2.6.16-rc1-mm5-full/drivers/media/dvb/frontends/mt312.c	2006-02-07 23:20:16.000000000 +0100
@@ -612,76 +612,6 @@
 	kfree(state);
 }
 
-static struct dvb_frontend_ops vp310_mt312_ops;
-
-struct dvb_frontend* vp310_attach(const struct mt312_config* config,
-				  struct i2c_adapter* i2c)
-{
-	struct mt312_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
-	strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
-
-	/* check if the demod is there */
-	if (mt312_readreg(state, ID, &state->id) < 0)
-		goto error;
-	if (state->id != ID_VP310) {
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	state->frequency = 90;
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-struct dvb_frontend* mt312_attach(const struct mt312_config* config,
-				  struct i2c_adapter* i2c)
-{
-	struct mt312_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
-	strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
-
-	/* check if the demod is there */
-	if (mt312_readreg(state, ID, &state->id) < 0)
-		goto error;
-	if (state->id != ID_MT312) {
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	state->frequency = 60;
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
 static struct dvb_frontend_ops vp310_mt312_ops = {
 
 	.info = {
@@ -720,6 +650,49 @@
 	.set_voltage = mt312_set_voltage,
 };
 
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+					struct i2c_adapter* i2c)
+{
+	struct mt312_state* state = NULL;
+
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
+
+	/* check if the demod is there */
+	if (mt312_readreg(state, ID, &state->id) < 0)
+		goto error;
+
+	switch (state->id) {
+	case ID_VP310:
+		strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
+		state->frequency = 90;
+		break;
+	case ID_MT312:
+		strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
+		state->frequency = 60;
+		break;
+	default:
+		printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
+		goto error;
+	}
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
@@ -727,5 +700,4 @@
 MODULE_AUTHOR("Andreas Oberritter <[email protected]>");
 MODULE_LICENSE("GPL");
 
-EXPORT_SYMBOL(mt312_attach);
-EXPORT_SYMBOL(vp310_attach);
+EXPORT_SYMBOL(vp310_mt312_attach);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux