This patch contains the following possible cleanups:
- update the Kconfig help to mention the VP310
- merge vp310_attach and mt312_attach into a new vp310_mt312_attach
to remove some code duplication
Signed-off-by: Adrian Bunk <[email protected]>
---
This patch was already sent on:
- 28 Jan 2006
drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 2
drivers/media/dvb/frontends/Kconfig | 2
drivers/media/dvb/frontends/mt312.c | 111 +++++++---------------
drivers/media/dvb/frontends/mt312.h | 6 -
4 files changed, 43 insertions(+), 78 deletions(-)
--- linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/Kconfig.old 2006-01-28 17:12:59.000000000 +0100
+++ linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/Kconfig 2006-01-28 17:13:26.000000000 +0100
@@ -29,7 +29,7 @@
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_MT312
- tristate "Zarlink MT312 based"
+ tristate "Zarlink VP310/MT312 based"
depends on DVB_CORE
help
A DVB-S tuner module. Say Y when you want to support this frontend.
--- linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/mt312.h.old 2006-01-28 17:23:16.000000000 +0100
+++ linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/mt312.h 2006-01-28 17:23:45.000000000 +0100
@@ -38,10 +38,8 @@
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
};
-extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c);
-extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
#endif // MT312_H
--- linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/mt312.c.old 2006-01-28 17:13:36.000000000 +0100
+++ linux-2.6.16-rc1-mm3-full/drivers/media/dvb/frontends/mt312.c 2006-01-28 17:20:15.000000000 +0100
@@ -612,76 +612,6 @@
kfree(state);
}
-static struct dvb_frontend_ops vp310_mt312_ops;
-
-struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_VP310) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 90;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_MT312) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 60;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
static struct dvb_frontend_ops vp310_mt312_ops = {
.info = {
@@ -720,6 +650,44 @@
.set_voltage = mt312_set_voltage,
};
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct mt312_state* state = NULL;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
+
+ /* check if the demod is there */
+ if (mt312_readreg(state, ID, &state->id) < 0)
+ goto error;
+
+ if (state->id == ID_VP310){
+ strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
+ state->frequency = 90;
+ } else if (state->id == ID_MT312) {
+ strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
+ state->frequency = 60;
+ } else
+ goto error;
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
@@ -727,5 +695,4 @@
MODULE_AUTHOR("Andreas Oberritter <[email protected]>");
MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(mt312_attach);
-EXPORT_SYMBOL(vp310_attach);
+EXPORT_SYMBOL(vp310_mt312_attach);
--- linux-2.6.16-rc1-mm3-full/drivers/media/dvb/b2c2/flexcop-fe-tuner.c.old 2006-01-28 17:17:41.000000000 +0100
+++ linux-2.6.16-rc1-mm3-full/drivers/media/dvb/b2c2/flexcop-fe-tuner.c 2006-01-28 17:29:53.000000000 +0100
@@ -526,7 +526,7 @@
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
- if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+ if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
ops = fc->fe->ops;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
