Jens Axboe schrieb:
>On Sun, May 29 2005, Michael Thonke wrote:
>
>
>>Jens Axboe wrote,
>>
>>
>>
>>>There's really nothing to be tuned. If NCQ is enabled for your drive, it
>>>will be printed in dmesg after the lba48 flag, such as:
>>>
>>>ata1: dev 0 ATA, max UDMA/133, 488281250 sectors lba48 ncq
>>>
>>>If you don't see NCQ there, your drive/controller doesn't support it.
>>>Likewise you will have a queueing depth of > 1 if NCQ is enabled, check
>>>/sys/block/sdX/device/queue_depth to see what the configured queueing
>>>depth is for that device.
>>>
>>>
>>>
>>>
>>>
>>Hi Jens,
>>
>>thanks for the short info now my next question how many queue depths
>>are healty and wanted?
>>
>>For my Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage
>>Controllers cc=AHCI (rev 01)
>>and Samsung Hd160JJ SATAII drive the default queue is 30
>>
>> ioGL64NX_MACH~# cat /sys/block/sda/device/{model,queue_depth}
>> SAMSUNG HD160JJ
>> 30
>>
>> hdparm -Tt /dev/sda
>>
>> /dev/sda:
>> Timing cached reads: 4724 MB in 2.00 seconds = 2360.00 MB/sec
>> Timing buffered disk reads: 164 MB in 3.02 seconds = 54.28 MB/sec
>>
>>On random access the drives is a bit noisy but the subjective feeling
>>is great everything goes a bit faster.
>>
>>
>
>You should see a nice performance improvement on random reads mainly,
>with streamed threaded reads being a bit faster as well. Write
>performance will be the same, if you had write back caching on before.
>So the real win is random reads, and that can be a pretty big win.
>
>Actually I would say that the drive should sound _less_ noisy if NCQ is
>being really effective. Hard to judge of course, very subjective :)
>
>
>
Well the subjective feeling is great through! What I noticed is a
improvement on rsync (goes slighty faster drive to drive).
The noise decrease now it only make noise on very heavy IO reads and writes.
>>And whats about the option /sys/block/sdx/device/queue_type = simple
>>what can be done here?
>>
>>
>
>Nothing, unfortunately NCQ doesn't provided any way of doing ordered
>tags. The only tunable is the queue_depth, you can set that anywhere
>between 1 and 30.
>
>
>
So way my drive got default 30 as queue_depth on AHCI as you mentoined
in the next mail
2-4 should be suitable and enough/normal?
Thanks for the informations
Greets
Michael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
