On 02/03/2011 09:09 PM, Burkhard Plache wrote: > Ok, here again: > > lspci | grep VGA > > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] > 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter > > And attached the Xorg.0.log file after I renamed xorg.conf and rebooted. > > Hope this allows you to see the origin of the problem, > and many thanks for taking time & effort. > Burkhard Burkhard, Here is what I noticed: 1) The Xorg log file shows that there is no Monitor definition. > [ 45.590] (==) No Layout section. Using the first Screen section. > [ 45.590] (==) No screen section available. Using defaults. > [ 45.590] (**) |-->Screen "Default Screen Section" (0) > [ 45.590] (**) | |-->Monitor "<default monitor>" > [ 45.591] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. 2) You *are* getting the SIS driver loaded. > [ 45.672] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, > SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, > SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), > SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX], > SIS340 > [ 45.674] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), > Volari V3XT/V5/V8/Duo (XG40) > [ 45.697] (--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found > [ 45.879] (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.8.99.904) > [ 45.879] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx> and others > [ 45.879] (II) SIS(0): *** See http://www.winischhofer.eu/linuxsisvga.shtml > [ 45.879] (II) SIS(0): *** for documentation and updates. I tried going to the URL listed above. It is for sale. Does Fedora know this???? Hmmm, a quick google shows that the site has moved to www.winischhofer.net. Perhaps a quick update request should be filed for the driver so it reflects the correct URLs. Lots of good information on that site, including a section on troubleshooting problems. I don't know if you've been there or not, or if its even up-to-date (the driver seems to be dated 2005) enough to be useful, but it might be worth looking it over. 3) The combination of the SIS driver and the default monitor ends up throwing away most of your higher resolution modes leaving you with 960x600 or less for your resolution. > [ 48.231] (II) SIS(0): Replaced entire mode list with built-in modes > [ 48.231] (II) SIS(0): Using real widescreen modes for CRT1 VGA devices > [ 48.231] (II) SIS(0): Use option "ForceCRT1VGAAspect" to overrule > [ 48.231] (II) SIS(0): "Unknown reason" in the following list means that the mode > [ 48.231] (II) SIS(0): is not supported on the chipset/bridge/current output device. > [ 48.231] (II) SIS(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz > [ 48.232] (II) SIS(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz > [ 48.232] (II) SIS(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz > [ 48.232] (WW) SIS(0): Unable to estimate virtual size > [ 48.232] (II) SIS(0): Clock range: 10.00 to 400.00 MHz > [ 48.232] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) > [ 48.232] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) > [ 48.232] (II) SIS(0): Not using default mode "800x600" (hsync out of range) > [ 48.233] (II) SIS(0): Not using default mode "800x600" (hsync out of range) > [ 48.233] (II) SIS(0): Not using default mode "800x600" (hsync out of range) > [ 48.233] (II) SIS(0): Not using default mode "800x600" (hsync out of range) > [ 48.233] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) > [ 48.233] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) > [ 48.233] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) > [ 48.233] (II) SIS(0): Not using default mode "640x480" (hsync out of range) > [ 48.233] (II) SIS(0): Not using default mode "640x480" (hsync out of range) > [ 48.234] (II) SIS(0): Not using default mode "640x480" (hsync out of range) > [ 48.234] (II) SIS(0): Not using default mode "640x480" (hsync out of range) > [ 48.234] (II) SIS(0): Not using default mode "640x400" (vrefresh out of range) > [ 48.234] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) > [ 48.234] (II) SIS(0): Not using default mode "1024x768" (mode clock too high) > [ 48.234] (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > [ 48.234] (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > [ 48.234] (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > [ 48.234] (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > [ 48.235] (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > [ 48.235] (II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range) > [ 48.235] (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) > [ 48.235] (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) > [ 48.235] (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) > [ 48.235] (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > [ 48.235] (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > [ 48.235] (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > [ 48.236] (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > [ 48.236] (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > [ 48.236] (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > [ 48.236] (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > [ 48.236] (II) SIS(0): Not using default mode "320x200" (vrefresh out of range) > [ 48.236] (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) > [ 48.236] (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) > [ 48.236] (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) > [ 48.237] (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) > [ 48.238] (II) SIS(0): Not using default mode "800x480" (vrefresh out of range) > [ 48.238] (II) SIS(0): Not using default mode "800x480" (hsync out of range) > [ 48.238] (II) SIS(0): Not using default mode "1024x576" (mode clock too high) > [ 48.238] (II) SIS(0): Not using default mode "1024x576" (hsync out of range) > [ 48.238] (II) SIS(0): Not using default mode "1024x576" (hsync out of range) > [ 48.238] (II) SIS(0): Not using default mode "1280x720" (hsync out of range) > [ 48.238] (II) SIS(0): Not using default mode "1280x720" (hsync out of range) > [ 48.238] (II) SIS(0): Not using default mode "1280x720" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1280x960" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1280x960" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1280x768" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1280x768" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1280x768" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1400x1050" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1400x1050" (hsync out of range) > [ 48.239] (II) SIS(0): Not using default mode "1152x864" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "1152x864" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "1152x864" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "848x480" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "848x480" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "856x480" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "1360x768" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "1280x800" (hsync out of range) > [ 48.240] (II) SIS(0): Not using default mode "1280x800" (hsync out of range) > [ 48.241] (II) SIS(0): Not using default mode "1280x800" (hsync out of range) > [ 48.241] (II) SIS(0): Not using default mode "1680x1050" (hsync out of range) > [ 48.241] (II) SIS(0): Not using default mode "1920x1080" (mode clock too high) > [ 48.241] (II) SIS(0): Not using default mode "1280x854" (hsync out of range) > [ 48.241] (II) SIS(0): Not using default mode "1280x854" (hsync out of range) > [ 48.241] (II) SIS(0): Not using default mode "1280x854" (hsync out of range) > [ 48.241] (--) SIS(0): Virtual size is 960x600 (pitch 960) > [ 48.241] (**) SIS(0): *Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz > [ 48.242] (II) SIS(0): Modeline "960x600"x60.0 41.50 960 1008 1088 1120 600 603 609 618 +hsync +vsync (37.1 kHz) > [ 48.242] (**) SIS(0): *Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz > [ 48.242] (II) SIS(0): Modeline "960x540"x60.0 37.29 960 976 1008 1104 540 543 549 563 +hsync +vsync (33.8 kHz) > [ 48.242] (**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > [ 48.242] (II) SIS(0): Modeline "800x600"x60.3 39.97 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > [ 48.242] (**) SIS(0): *Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz > [ 48.242] (II) SIS(0): Modeline "800x600"x56.3 36.06 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) > [ 48.243] (**) SIS(0): *Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz > [ 48.243] (II) SIS(0): Modeline "768x576"x60.1 35.00 768 792 872 976 576 578 581 597 +hsync +vsync (35.9 kHz) > [ 48.243] (**) SIS(0): *Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz > [ 48.243] (II) SIS(0): Modeline "720x576"x60.1 32.73 720 744 816 912 576 578 581 597 +hsync +vsync (35.9 kHz) > [ 48.243] (**) SIS(0): *Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz > [ 48.243] (II) SIS(0): Modeline "856x480"x59.8 33.94 856 872 1000 1072 480 492 495 529 -hsync -vsync (31.7 kHz) > [ 48.243] (**) SIS(0): *Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz > [ 48.258] (II) SIS(0): Modeline "800x480"x60.0 39.77 800 840 968 1056 480 552 556 628 +hsync +vsync (37.7 kHz) > [ 48.259] (**) SIS(0): *Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz > [ 48.259] (II) SIS(0): Modeline "720x480"x61.0 28.28 720 728 840 896 480 490 492 517 -hsync -vsync (31.6 kHz) > [ 48.259] (**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz > [ 48.259] (II) SIS(0): Modeline "640x480"x59.7 25.06 640 656 752 800 480 490 492 525 -hsync -vsync (31.3 kHz) > [ 48.259] (**) SIS(0): *Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D) > [ 48.259] (II) SIS(0): Modeline "512x384"x60.1 32.57 512 528 592 672 384 385 388 403 doublescan -hsync -vsync (48.5 kHz) > [ 48.259] (**) SIS(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) > [ 48.260] (II) SIS(0): Modeline "400x300"x60.3 19.98 400 416 480 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz) > [ 48.260] (**) SIS(0): *Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D) > [ 48.260] (II) SIS(0): Modeline "320x240"x60.7 12.53 320 328 376 400 240 245 246 258 doublescan -hsync -vsync (31.3 kHz) > [ 48.260] (==) SIS(0): DPI set to (96, 96) This appears to be where your problem lies, though I'm not sure what's different here, other than there is *NO* mention of EDID anywhere in your log file. Does the SiS driver not support EDID? If that is the case, you may wish to create a file for your Monitor that specifies the the correct limits of your monitors hsync, vrefresh, and max pixel clock and put it in your /etc/X11/xorg.conf.d directory. Something like: > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "LCD Panel 1280x800" > HorizSync 31.5 - 90.0 > VertRefresh 60.0 - 60.0 > Option "dpms" > EndSection That section above is from my laptop, change the values to match your monitor. If you specify the correct HorizSync and VertRefresh for your monitor, maybe the SIS driver won't through away the modes you are looking for.... -- Kevin J. Cummings kjchome@xxxxxxxxxxx cummings@xxxxxxxxxxxxxxxxxx cummings@xxxxxxxxxxxxxxxxxxxxxxx Registered Linux User #1232 (http://counter.li.org) -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
