On 01/01/2011 07:10 PM, Bruno Wolff III wrote: > On Sat, Jan 01, 2011 at 18:52:30 +0000, > Chris Jones<linux@xxxxxxxxxxxxxxxx> wrote: >> Thanks for that. I have included the last section of the log here:- >> [109697.603] (II) RADEON(0): EDID for output DIN >> [109697.617] (II) RADEON(0): EDID for output DVI-1 >> [109999.651] (II) RADEON(0): EDID for output DVI-0 >> [109999.651] (II) RADEON(0): Printing probed modes for output DVI-0 >> [109999.651] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 >> 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) >> [109999.651] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 >> 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) >> [109999.651] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 >> 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) >> [109999.651] (II) RADEON(0): Modeline "848x480"x60.0 33.75 848 864 >> 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) >> [109999.651] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 >> 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) > The monitor or video card are seem to be limited to less than 1600x1600 since > no mode line is generated for that. In a previous message the monitor-edid > output suggested that your monitor does have EDID support. > > I looked up specs on the monitor and it looks like the natural resolution of > the monitor is 1680x1050. It may be that the monitor doesn't really support > 1600x1200 (even if it can be driven out of spec) and that the video card > doesn't support 1680x1050. > . > I have now resolved my issue. I achieved it by downloading the ATI drivers for my Radeo 2600 card and everything is working fine now. Thanks to everyone for their help. -- Chris Jones -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
