Hi, I succeed to pass phase1 but not phase2.
Here is my logs : Dec 16 19:28:43 Fedora-64-2 racoon: INFO: IPsec-SA request for 8x.xxx.xx.xx queued due to no phase1 found. Dec 16 19:28:43 Fedora-64-2 racoon: INFO: initiate new phase 1 negotiation: 192.168.50.181[500]<=>8x.xxx.xx.xx[500] Dec 16 19:28:43 Fedora-64-2 racoon: INFO: begin Aggressive mode. Dec 16 19:28:43 Fedora-64-2 racoon: INFO: received Vendor ID: DPD Dec 16 19:28:43 Fedora-64-2 racoon: NOTIFY: couldn't find the proper pskey, try to get one by the peer's address. Dec 16 19:28:43 Fedora-64-2 racoon: INFO: ISAKMP-SA established 192.168.50.181[500]-8x.xxx.xx.xx[500] spi:d246d525eb2367b9:370a599c26588a34 Dec 16 19:28:44 Fedora-64-2 racoon: INFO: initiate new phase 2 negotiation: 192.168.50.181[500]<=>8x.xxx.xx.x[500] Dec 16 19:29:14 Fedora-64-2 racoon: INFO: IPsec-SA expired: AH/Transport 8x.xxx.xx.xx[0]->192.168.50.181[0] spi=72170590(0x44d3c5e) Dec 16 19:29:14 Fedora-64-2 racoon: WARNING: the expire message is received but the handler has not been established. Dec 16 19:29:14 Fedora-64-2 racoon: INFO: IPsec-SA expired: ESP/Transport 8x.xxx.xx.xx[0]->192.168.50.181[0] spi=75860073(0x4858869) ANY help would be appreciated Best Regards Le 10/12/10 17:41, Kevin Fenzi a écrit : On Fri, 10 Dec 2010 10:09:10 +0100 Luc MAIGNAN <luc.maignan@xxxxxxxxxxxx> wrote:Hi, one more time... I have to setup a VPN IPSEC tunnel between a linux machine and a physical router. The security mode of the router is 'IKE using pre-shared key' I cannot use openVPN because the router isn't compliant with. I want so use openSwan to setup the IPSEC tunnel. Am I right ? How to configure the pre-shared key with openswan ?Try: http://docs.fedoraproject.org/en-US/Fedora/14/html-single/Security_Guide/index.html#sect-Security_Guide-Virtual_Private_Networks_VPNs-IPsec kevin |
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines