Re: F14: what replaces s-c-d?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2010-11-10 at 16:57 +0000, Beartooth wrote:
> 	By "s-c-d" I mean to abbreviate "system-config-display."
> 
> 	I've been running three, sometimes four PCs, behind  a series of 
> KVM switches, against an HP w2207h monitor, which is a flat panel 
> 1680x1050, for some years and several Fedora releases.
> 
> 	Fedora's releases have always had troubles; as, I think, would 
> any other OS, since the PCs are generally two to seven years old: at 
> least one of them was built before any such resolution as 1680x1050 had 
> been invented. (The monitor can compensate down to 1280x1024, or a little 
> farther -- if the PC can send that, the monitor can stretch it to fit.)
> 
> 	The troubles have gotten better but are not quite clear gone. 
> They've gotten down to this: on some but not all PCs, the cursor showing 
> on the screen is a couple millimeters higher than the mouse thinks; and 
> some displays' windows cannot be sized nor moved so as to make their 
> bottom lines clickable, or even visible.
> 
> 	The big hammer used to be to take each PC in turn out from behind 
> the KVM switch, connect it alone directly to the keyboard, mouse, and 
> monitor; and use system-config-display.
> 
> 	That would get everything close enough for the monitor to be able 
> to handle the difference.
> 
> 	But now I get : 
> 
> [root@Hbsk1 ~]# system-config-display
> Command not found.
> 
> 	Telling yum to install it fails.
> 
> [root@Hbsk1 ~]# yum install system-config-*
> 
> finds what I have, and installs a lot more; but system-config-display is 
> not among them.
> 
> 	What can I use? This constantly clicking on the wrong place is 
> beginning to resemble the classic water torture ....
> -- 
> Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User
> I have precious (very precious!) little idea where up is.

Not quite as gui-friendly, but you can get X itself to generate a
xorg.conf configuration file:
 
 X -configure :1 # the :1 avoids conflicts with existing X server if any

You can review /root/xorg.conf.new to see if the options are to your
liking. To install it:

 mv /root/xorg.conf.new /etc/X11/xorg.conf

-Chris

-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux