On 10/3/10 11:43 AM, JD wrote: > > On 10/03/2010 09:09 AM, Jim wrote: >> On 10/02/2010 08:28 PM, JD wrote: >>> On 10/02/2010 02:42 PM, Jim wrote: >>>> What is the 6749 in this command ? >>>> >>>> >>>> # netstat -nltp | grep 22 >>>> tcp 0 0 0.0.0.0:22 >>>> 0.0.0.0:* LISTEN 6749/sshd >>>> tcp 0 0 0.0.0.0:8822 >>>> 0.0.0.0:* LISTEN 1666/smfpd >>>> tcp 0 0 :::22 >>>> :::* LISTEN 6749/sshd >>> That's the process id. >>> >> I guess this would indicate I'am getting out onto the Internet. >> But is SSH ? >> >> # host -a 61.58.52.206 >> Trying "206.52.58.6.61.in-addr.arpa" >> ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 28179 >> ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 >> >> ;; QUESTION SECTION: >> ;206.52.58.68.in-addr.arpa. IN PTR >> >> ;; ANSWER SECTION: >> 206.52.58.68.in-addr.arpa. 7200 IN PTR >> c-61-58-52-206.hsd1.in.comcast.net. >> >> Received 91 bytes from 61.87.72.134#53 in 29 ms >> > Well, the process ID of the sshd does not mean you ARE > going over the internet, targeting a remote port 22. > The sshd is in listening mode, that's all. > > Also, on your end, it matters not whether or not you > are running the sshd, since you are not trying to ssh > into your own machine. You want to ssh out to a remote > machine, and that's the machine that is running the sshd > that should respond to your connection request. > > When you shared with us the firewall entries, was that > for your machine or the remote machine you are trying to connect to? > if that was for YOUR machine, then please run the command > > iptables -L -n > > on the remote machine and post the results. > > Also, is your machine connected to a router/gateway? > If so, can you login to that router or gateway (usually > by aiming your browser to the router's LAN ip address. > Go thtough all it's menus that display/configure ports > and firewalls. See if that is where the block is. > Good idea. Also check the contents of hosts.allow/hosts.deny. One further thing is to check if the IP address is being changed (NAT) in-between the two systems. That can cause more troubles... James McKenzie -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
