Re: no sound on F11, F12 and now F13 but sound on Omega 12 live??? wtf??

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting JD <jd1008@xxxxxxxxx>:

>   On 07/05/2010 06:45 PM, Dave Stevens wrote:
>> The subject line pretty much says it. It's quite frustrating to be unable to
>> get this working. I am, open to suggestions. The same system with the thingy
>> plugged into the same little hole(in the back of a Sound Blaster Ensoniq)
>> makes no sound in the Fedoras but good sound in Omega. Is there some config
>> file I can adduce as a hint? I have no idea where to look.  
>> pulseaudio shows in
>> top.
>>
>> Dave
> Does your audio device show up in
> /var/log/boo.log or in /var/log/messages?

not in boot but in messages, yes  like this:

Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:  
snd_pcm_avail() returned a value that is exceptionally large:  
18446744073709522368 bytes (418293516244 ms).
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c: Most likely  
this is a bug in the ALSA driver 'snd_ens1370'. Please report this  
issue to the ALSA developers.
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c: snd_pcm_dump():
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c: Hardware PCM  
card 0 'Ensoniq AudioPCI' device 0 subdevice 0
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c: Its setup is:
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   stream        
: CAPTURE
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   access        
: MMAP_INTERLEAVED
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   format        
: S16_LE
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   subformat    : STD
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   channels     : 2
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   rate         : 44100
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   exact rate    
: 44100 (1411200/32)
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   msbits       : 16
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   buffer_size  : 16384
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   period_size  : 16384
Jul  4 14:55:03 davehost pulseaudio[2120]: alsa-util.c:   period_time   
: 371519
:

in /var/log/messages and about another 20 lines like that, should I  
report as suggested in line two above?

>
> Can you post output of lspci?

sure, here:

00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8  
[Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8  
[Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8  
[Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8  
[Athlon64/Opteron] Miscellaneous Control
01:06.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
05:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X  
Bridge (rev 07)
05:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X  
Bridge (rev 07)
08:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 4770 [RV740]
08:00.1 Audio device: ATI Technologies Inc RV710/730

and for what it's worth I'm curious why my video card shows up as an  
audio device.

Dave

>
>
> --
> users mailing list
> users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>



-- 
"It is no measure of health to be well adjusted to a profoundly sick society."
   Krishnamurti

-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux