On 6/24/2010 9:33 AM, Mikkel wrote: > On 06/24/2010 08:11 AM, Gary Stainburn wrote: >> Also found in dmesg: (full file available at >> http://www.stainburn.com/dmesg.txt ) >> >> scsi 5:0:0:0: Direct-Access PQ: 0 ANSI: 2 >> CCS >> sd 5:0:0:0: Attached scsi generic sg2 type 0 >> sd 5:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). >> sd 5:0:0:0: [sdb] Using 0xffffffff as device size >> sd 5:0:0:0: [sdb] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB) >> sd 5:0:0:0: [sdb] Write Protect is off >> sd 5:0:0:0: [sdb] Mode Sense: 00 38 00 00 >> sd 5:0:0:0: [sdb] Assuming drive cache: write through >> sd 5:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). >> sd 5:0:0:0: [sdb] Using 0xffffffff as device size >> sd 5:0:0:0: [sdb] Assuming drive cache: write through >> sdb: unknown partition table >> sd 5:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). >> sd 5:0:0:0: [sdb] Using 0xffffffff as device size >> sd 5:0:0:0: [sdb] Assuming drive cache: write through >> sd 5:0:0:0: [sdb] Attached SCSI disk >> > Dumb question - is your external case rated for a drive that large? > From the messages, it sounds like the drive is too big. Depending on > the electronics, there is a drive size limit to external cases. > > Mikkel I've just seen this exact problem with the exact same numbers. The drive is dead or dying. I'm hoping mine comes back enough to grab the data still on it. When it works it works without error and passes short smartctl tests. I think the disk surfaces are probably okay and it's the electronics that are almost gone. If I find any sequence that seems to get it initialized and working, albeit for a short time, I'll post. Rich
No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.437 / Virus Database: 271.1.1/2960 - Release Date: 06/24/10 06:35:00
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines