battery botched f11 to f12 upgrade (macppc-ibookG4)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Anybody want to give give me any advice how to proceed before I go and do something really stupid?

(The obligatory excuse: It was plugged in. The power splitter has individual switches and I had switched the outlet off while the notebook was powered down earlier in the afternoon. {mutter.}{grumble.})

Battery gave out while it was fairly early in the update list. It still (!) boots. 

I tried yum upgrade to continue and ran out of /var/cache. (Only 2G. I've got to quit lying to myself and just mount 10G on /var. Or maybe I should mount a special 4G volume on /var, but I'm not sure I should trust LVM.)

X11 boots, but the screen flashes a lot. USB seems have drivers from F12, but the USB mouse works. Switching to a virtual console blanks the screen and then I can't get back to the X11 session and I can't bring up any console. I can get a virtual console if I grab it before it goes to X11. Hmm. I may take that back, it's giving me virtual consoles now. But that crazy re-mapping of the mac virtual context menu 

SELinux had to relabel the filesystem when I booted it just now.

Tried to re-run the netinstall CD, but it does not find a good install, so it only gives me the options to install over the existing filesystem or start from scratch. (Or manually set the filesystem up, which will be my last resort, since I can salvage /home and /etc.)

I am sort of considering using the volume manager to allocate 4G to /var/cache and trying pre-upgrade. Scary, since I don't know whether I can trust LVM.

Oh. The console tells me it's Constantine, but it then reports kernel 2.6.30.10-105.fc11.ppc . Heh.

So, does anyone want to tell me, "Don't DO that!!!" about trying preupgrade?

Joel Rees

dmesg:
------------------------------------------
Using PowerMac machine description
Total memory = 768MB; using 2048kB for hash table (at cfe00000)
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.30.10-105.2.23.fc11.ppc (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #1 Thu Feb 11 06:53:23 UTC 2010
Found initrd at 0xc1500000:0xc18bd000
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xff7c0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
Processor NAP mode on idle enabled.
PowerMac motherboard: iBook G4
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
console [udbg0] enabled
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
PCI host bridge /pci@f0000000  ranges:
 MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
  IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
 MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
PCI host bridge /pci@f2000000 (primary) ranges:
 MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 
  IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
 MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
PCI host bridge /pci@f4000000  ranges:
 MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 
  IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
nvram: Checking bank 0...
nvram: gen0=484, gen1=483
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x30000000, Total RAM: 0x30000000
Memory hole size: 0MB
Zone PFN ranges:
  DMA      0x00000000 -> 0x00030000
  Normal   0x00030000 -> 0x00030000
  HighMem  0x00030000 -> 0x00030000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00030000
On node 0 totalpages: 196608
free_area_init_node: node 0, pgdat c072abc0, node_mem_map c07e0000
  DMA zone: 1536 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 195072 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 195072
Kernel command line: ro rhgb quiet root=UUID=** 
NR_IRQS:512
mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 18.432000 MHz
time_init: processor frequency   = 1199.999997 MHz
clocksource: timebase mult[d9038e4] shift[22] registered
clockevent: decrementer mult[4b7] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 3932160 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
High memory: 0k
Memory: 760832k/786432k available (7096k kernel code, 25084k reserved, 284k data, 582k bss, 344k init)
Kernel virtual memory layout:
  * 0xfffef000..0xfffff000  : fixmap
  * 0xff800000..0xffc00000  : highmem PTEs
  * 0xfde6a000..0xff800000  : early ioremap
  * 0xf1000000..0xfde6a000  : vmalloc & ioremap
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 36.73 BogoMIPS (lpj=18368)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
ftrace: allocating 16306 entries in 48 pages
Failed to register trace ftrace module notifier
net_namespace: 1084 bytes
regulator: core version 0.5
NET: Registered protocol family 16
rstcr compatible register does not exist!
irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
 channel 0 bus <multibus>
 channel 1 bus <multibus>
irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
 channel 0 bus <multibus>
PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
 channel 1 bus <multibus>
 channel 2 bus <multibus>
__ioremap(): phys addr 0x0 is RAM lr c0020dcc
irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
PCI: Probing PCI hardware
pci 0000:00:10.0: reg 10 32bit mmio: [0x98000000-0x9fffffff]
pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
pci 0000:00:10.0: reg 30 32bit mmio: [0x90020000-0x9003ffff]
pci 0000:00:10.0: supports D1 D2
irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
pci 0001:10:12.0: supports D1 D2
pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:12.0: PME# disabled
pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
pci 0001:10:1b.0: supports D1 D2
pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.0: PME# disabled
pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
pci 0001:10:1b.1: supports D1 D2
pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.1: PME# disabled
pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
pci 0001:10:1b.2: supports D1 D2
pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.2: PME# disabled
irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63
pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
pci 0002:20:0e.0: supports D1 D2
pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0002:20:0e.0: PME# disabled
pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
pci_bus 0000:00: resource 0 io:  [0x802000-0x1001fff]
pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
pci_bus 0001:10: resource 0 io:  [0x00-0x7fffff]
pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
pci_bus 0002:20: resource 0 io:  [0xff7fe000-0xffffdfff]
pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
Registering qe_ic with sysfs...
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3828k freed
Thermal assist unit not available
Registering PowerMac CPU frequency driver
Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
audit: initializing netlink socket (disabled)
type=2000 audit(1276125746.447:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1494
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
radeonfb 0000:00:10.0: Invalid ROM contents
radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
radeonfb: Retrieved PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb: Backlight initialized (radeonbl0)
radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c"
Generic non-volatile memory driver v1.1
Linux agpgart interface v0.103
agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Serial: MPC52xx PSC UART driver
brd: module loaded
loop: module loaded
MacIO PCI driver attached to Intrepid chipset
irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
input: Macintosh mouse button emulation as /devices/virtual/input/input0
apm_emu: PMU APM Emulation initialized.
Uniform Multi-Platform E-IDE driver
ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
adb: starting probe task...
adb devices: [2]: 2 c9 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type JIS.
input: ADB keyboard as /devices/virtual/input/input1
input: ADB Powerbook buttons as /devices/virtual/input/input2
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse as /devices/virtual/input/input3
adb: finished probe task...
ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
Probing IDE interface ide0...
hda: Hitachi HTS541616J9AT00, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0xf102a000-0xf102a070,0xf102a160 on irq 39
ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
Probing IDE interface ide1...
hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: MWDMA2 mode selected
ide1 at 0xf1024000-0xf1024070,0xf1024160 on irq 24
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/7512KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
ehci_hcd 0001:10:1b.2: EHCI Host Controller
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.ppc ehci_hcd
usb usb1: SerialNumber: 0001:10:1b.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1a.0: OHCI Host Controller
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.ppc ohci_hcd
usb usb2: SerialNumber: 0001:10:1a.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.ppc ohci_hcd
usb usb3: SerialNumber: 0001:10:1b.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.ppc ohci_hcd
usb usb4: SerialNumber: 0001:10:1b.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
mice: PS/2 mouse device common for all mice
rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus uni-n 1 registered
PowerMac i2c bus uni-n 0 registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Running MSI bitmap self-tests ...
PM: Resume from disk failed.
registered taskstats version 1
input: PMU as /devices/virtual/input/input4
Registered led device: pmu-front-led
Initalizing network drop monitor service
Freeing unused kernel memory: 344k init
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1276125761.299:2): enforcing=1 old_enforcing=0 auid=** ses=**
SELinux: 8192 avtab hash slots, 131123 rules.
SELinux: 8192 avtab hash slots, 131123 rules.
SELinux:  8 users, 12 roles, 2773 types, 130 bools, 1 sens, 1024 cats
SELinux:  74 classes, 131123 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1276125762.005:3): policy loaded auid=** ses=**
udev: starting version 141
b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>)
ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
sungem.c:v0.98 8/24/03 David S. Miller (davem@xxxxxxxxxx)
PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:47:8a:4e
eth0: Found BCM5221 PHY
firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
firewire_core: created device fw0: GUID 000d93fffe478a4e, S400
eth0: Link is up at 100 Mbps, full-duplex.
cfg80211: Calling CRDA to update world regulatory domain
b43-phy0: Broadcom 4306 WLAN found (core revision 5)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-1, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-2, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-3, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-4, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-5, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-6, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-7, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda4, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
SELinux: initialized (dev hda10, type hfsplus), uses genfs_contexts
SELinux: initialized (dev hda5, type hfsplus), uses genfs_contexts
SELinux: initialized (dev hda3, type hfsplus), uses genfs_contexts
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-9, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-10, type ext3), uses xattr
Adding 2097144k swap on /dev/mapper/VolGrP-f11swap.  Priority:-1 extents:1 across:2097144k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
input: b43-phy0 as /devices/virtual/input/input5
b43 ssb0:0: firmware: requesting b43/ucode5.fw
b43 ssb0:0: firmware: requesting b43/pcm5.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
b43-phy0: Radio turned on by software
ADDRCONF(NETDEV_UP): wlan0: link is not ready
radeonfb 0000:00:10.0: Invalid ROM contents
radeonfb 0000:00:10.0: Invalid ROM contents
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.30.0 20080528 for 0000:00:10.0 on minor 0
agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
eth0: no IPv6 routers present
agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
[drm] Loading R200 Microcode
fuse init (API version 7.11)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

-- 
Joel Rees 
-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux