On 25/05/10 06:45, kalinix wrote:If this applies for ssh only, you could
do something like this, on box9:
>
>
> IPTABLES -I INPUT -i eth0 -s ip.of.box.6 -p tcp -m tcp --dport 22 -j
> ACCEPT
>
>
> If you need more services to be available for box9, you simply let out
> -m tcp and --dport 22, to get this:
>
>
> IPTABLES -I INPUT -i eth0 -s ip.of.box.6 -j ACCEPT
>
>
> To see all the packages from box6, you can insert the rule below:
>
>
> IPTABLES -I INPUT -i eth0 -s ip.of.box.6 -m state --state NEW -j LOG
> --log-prefix "IPTABLES - NEW PACKETS FROM BOX6: " --log-level 6
>
>
> and watch the result in /var/log/messages (with tail -f /var/log/messages)
>
>
>
>
>
> Calin
>
I am using the provided F-12 iptables firewall. All I recall
changing was opening a port for VOIP. This problem has existed since
I originally installed this version. This is 64 bit while box9 which
works as expected is 32, other than that they are similar F-12's on
Dell boxes.
I installed a gigabit NIC on this box6 and and a new fast switch,
data transfer is fast but I would like to be able to make it work
from either end. I have three computers tied together through the
new switch, one is an NFS server.
Man iptables says:
iptables [-t table] {-A|-D} chain rule-specification
Would this then be the correct command to use?
iptables -A IPTABLES -I INPUT -i eth0 -s ip.of.box6 -m state
--state NEW -j LOG --log-prefix "IPTABLES - NEW PACKETS FROM
BOX6: " --log-level 6
Thanks.
Bob
--
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
