On Wed, 2010-04-07 at 10:18 -0400, Brian C. Huffman wrote:
> All,
>
> I'm having problems with a new system and it appears to be Linux rather than hardware since I've been running for about 2 days now with Win XP SP2 installed on the same hardware.
>
> It's a MSI P41-C31 motherboard with an Intel Core2 Duo E7500 processor. I'm using a PCI Express SPARKLE SFPX84GS256U2LP GeForce 8400 GS video card.
>
> I experience complete hangs (no key presses acknowledged, system not pingable) almost randomly but moreso when using Video. For example, trying to boot into graphical mode will hang almost immediately. Text console will hang within 1/2 hour or less.
>
> I've swapped the video card with another computer (it works fine there) and also tried different power supplies and hard drives. Most recently I've installed Windows XP SP3 on the same computer and it's been running for about 2 days now without problems. So, this seems to be a linux issu.
>
> I've tried increasing the PCI-Express bus speed from 100 to 105 and it will run a little longer before crashing with video, but appears to create some other instability. So, this is not an acceptable solution.
>
> Does anyone have any ideas on what I could do to resolve this? The RMA Hell is killing me. :-(
>
> Thanks,
> Brian
It seems that the system will run if I use the vesa driver. But with
either nouveau or proprietary nvidia, I have problems. Here are the
messages:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.11-99.fc12.i686.PAE
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.3 20100127
(Red Hat 4.4.3-4) (GCC) ) #1 SMP Mon Apr 5 16:15:03 EDT 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
BIOS-e820: 000000003ffae000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0x3ffa0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 10000-18000
RAMDISK: 37449000 - 37fef3dd
Allocated new RAMDISK: 00b6c000 - 017123dd
Move RAMDISK from 0000000037449000 - 0000000037fef3dc to 00b6c000 -
017123dc
ACPI: RSDP 000f9810 00014 (v00 ACPIAM)
ACPI: RSDT 3ffa0000 00040 (v01 7610MS A7610100 20100310 MSFT 00000097)
ACPI: FACP 3ffa0200 00084 (v01 7610MS A7610100 20100310 MSFT 00000097)
ACPI: DSDT 3ffa0440 0634B (v01 A7610 A7610100 00000100 INTL 20051117)
ACPI: FACS 3ffae000 00040
ACPI: APIC 3ffa0390 0006C (v01 7610MS A7610100 20100310 MSFT 00000097)
ACPI: MCFG 3ffa0400 0003C (v01 7610MS OEMMCFG 20100310 MSFT 00000097)
ACPI: OEMB 3ffae040 00072 (v01 7610MS A7610100 20100310 MSFT 00000097)
ACPI: HPET 3ffa8440 00038 (v01 7610MS OEMHPET 20100310 MSFT 00000097)
ACPI: GSCI 3ffae0c0 02024 (v01 7610MS GMCHSCI 20100310 MSFT 00000097)
ACPI: SSDT 3ffb06f0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
137MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 00014000 - 0001aec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000400000 - 0000b620d8] TEXT DATA BSS ==> [0000400000 -
0000b620d8]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
#5 [0000b63000 - 0000b6b135] BRK ==> [0000b63000 -
0000b6b135]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 -
0000014000]
#7 [0000b6c000 - 00017123dd] NEW RAMDISK ==> [0000b6c000 -
00017123dd]
#8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 -
000001b000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x0003ffa0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003ffa0
On node 0 totalpages: 261935
free_area_init_node: node 0, pgdat c09d8a60, node_mem_map c1714200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 276 pages used for memmap
HighMem zone: 34958 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c2000000 s37848 r0 d23592 u524288
pcpu-alloc: s37848 r0 d23592 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
259887
Kernel command line: ro root=/dev/mapper/vg_dorset-lv_root nomodeset
LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us
rhgb quiet rdblacklist=nouveau -s
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 5240640 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory
cgroups
Initializing HighMem for node 0 (000375fe:0003ffa0)
Memory: 1013260k/1048192k available (3751k kernel code, 33940k reserved,
2364k data, 564k init, 140936k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc09fa000 - 0xc0a87000 ( 564 kB)
.data : 0xc07a9f28 - 0xc09f9118 (2364 kB)
.text : 0xc0400000 - 0xc07a9f28 (3751 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2933.444 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 5866.88 BogoMIPS (lpj=2933444)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Disabling lock debugging due to kernel taint
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 23426 entries in 46 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (11733.35 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
devtmpfs: initialized
regulator: core version 0.5
Time: 17:48:16 Date: 04/25/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - B3, should be AC
(20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:1d.1: reg 20 io port: [0xc880-0xc89f]
pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:1d.3: reg 20 io port: [0xc480-0xc49f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]
pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083]
pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007]
pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03]
pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:03:00.0: reg 18 64bit mmio pref: [0xf8fff000-0xf8ffffff]
pci 0000:03:00.0: reg 20 64bit mmio pref: [0xf8ff8000-0xf8ffbfff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebfffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io
+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but
clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 19 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x480-0x4bf has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:10: ioport range 0xa00-0xadf has been reserved
system 00:10: ioport range 0xae0-0xaef has been reserved
system 00:11: iomem range 0xe0000000-0xefffffff has been reserved
system 00:12: iomem range 0x0-0x9ffff could not be reserved
system 00:12: iomem range 0xc0000-0xcffff could not be reserved
system 00:12: iomem range 0xe0000-0xfffff could not be reserved
system 00:12: iomem range 0x100000-0x3fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0xe000-0xefff
pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1c.1: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 2 pref mem [0xf8f00000-0xf8ffffff]
pci_bus 0000:04: resource 3 io: [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11928k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1272217696.399:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1728
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: SSDT 3ffb00f0 002FB (v01 DpgPmm P001Ist 00000011 INTL 20051117)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 3ffb03f0 002FB (v01 DpgPmm P002Ist 00000012 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.11-99.fc12.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.11-99.fc12.i686.PAE uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.11-99.fc12.i686.PAE uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.11-99.fc12.i686.PAE uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.11-99.fc12.i686.PAE uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16027 buckets, 64108 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:457:846
rtc_cmos 00:03: setting system clock to 2010-04-25 17:48:17 UTC
(1272217697)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input3
ata1.00: ATA-5: WDC WD200BB-75AUA1, 18.20D18, max UDMA/100
ata1.00: 39102336 sectors, multi 16: LBA
ata1.01: ATAPI: 36X CD-ROM, VER 2.F0, max UDMA/33
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD200BB-75AU 18.2 PQ: 0
ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
scsi 0:0:1:0: CD-ROM 36X CD-ROM 2.F0 PQ: 0
ANSI: 5
sr0: scsi3-mmc drive: 2x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sda:
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 564k freed
Write protecting the kernel text: 3752k
Write protecting the kernel read-only data: 1780k
dracut: dracut-004-4.fc12
udev: starting version 145
psmouse serio1: ID: 10 00 64
dracut: Starting plymouth daemon
device-mapper: multipath: version 1.1.0 loaded
input: ImPS/2 Generic Wheel Mouse
as /devices/platform/i8042/serio1/input/input4
dracut: Scanning devices sda2 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_dorset" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "vg_dorset" now active
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_dorset-lv_root
dracut: Loading SELinux policy
type=1404 audit(1272217702.547:2): enforcing=1 old_enforcing=0
auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 162817 rules.
SELinux: 8192 avtab hash slots, 162817 rules.
SELinux: 8 users, 12 roles, 3100 types, 152 bools, 1 sens, 1024 cats
SELinux: 77 classes, 162817 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses
genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses
genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition
SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses
genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1272217702.972:3): policy loaded auid=4294967295
ses=4294967295
dracut: Switching root
udev: starting version 145
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 27 for MSI/MSI-X
eth0: RTL8168d/8111d at 0xf8568000, 40:61:86:7d:27:11, XID 081000c0 IRQ
27
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
intel_rng: FWH not detected
nvidia: module license 'NVIDIA' taints kernel.
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
iTCO_vendor_support: vendor-support=0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io
+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar 11
21:41:46 PST 2010
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
type=1400 audit(1272217708.715:4): avc: denied { mmap_zero } for
pid=712 comm="vbetool"
scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023
tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x19,
line=0x1a, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1288: realtek: No valid SSID,
checking pincfg 0x4007f603 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1304: realtek: Enabling init
ASM_ID=0xf603 CODEC_ID=10ec0889
input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/input/input5
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 2064376k swap on /dev/mapper/vg_dorset-lv_swap. Priority:-1
extents:1 across:2064376k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter
Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169: eth0: link up
r8169: eth0: link up
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
genfs_contexts
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
eth0: no IPv6 routers present
Machine check events logged
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
