Greetings; I have a terminal program running on the far end of a bluetooth serial circuit that is capable of handling the reception, or sending, of a file via the zmodem protocol. Unforch, the linux version of sz seems to fall short in 2 respects. 1. I am only seeing two **B000000 in the received string, I was under the impression there should be ***B000000 etc, am I right|wrong? FWIW, if I fire up minicom, no characters are gobbled up from what I type on this end. And conversely, no characters are lost by minicom of those I type on the other end. 2. The man page for sz ignores any references to the proper redirection of the desired path, and while I can get it to attempt a send according to the traffic monitor in blueman-manager, in fact I see traffic going both ways in the blueman-manager status line, but nothing is actually transmitted to the other end, and in 30 seconds or so, sz reports: Retry 0: Timeout on pathname Transfer incomplete This in spite of the fact that I gave it an -C10 -b filename on the invocation. So what is the proper "<>>" way to make sz use /dev/rfcomm0 for all transfer I/O? Man bash gives no examples for redirection of stdout and stdin simultainiously(sp?) Thanks all -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Possessions increase to fill the space available for their storage. -- Ryan -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
